Тёмный

Powder Coating Cold vs Hot Flocking 

710 Performance
Подписаться 11 тыс.
Просмотров 17 тыс.
50% 1

Help us reach 5,000 subscribers / weezgarage
Join the 710 Performance channel to help us grow and get access to perks:
/ @710performance
Powder Coating Cold vs Hot Flocking
In this 710 Performance vlog we're testing the different between hot flocking and powder coating a part cold. We're using Wet Black powder coat from Tiger Drylac (bit.ly/tiger-drylac) and we're using the same settings on our KF-X1 powder coating system for both the cold piece and the hot flocked piece. Have you ever wanted to learn how to hot flock powder coat? You simple warm the piece before you coat it. It's best to not coat until the piece is 190º or lower.
KF-X1 Powder Coating System - bit.ly/kf-x1-system
We're also testing out a new holographic flake spray that many of you have asked us if we could re-create. This is with a spray can effect, and is separate from the powder coat process.
Are you looking to start a powder coating business, or just looking to grow your current powder coating business? Consider joining our Facebook Group "This Business of Powder Coating" to learn from other powder coaters, and help to grow your business / 276929966748631
Products we use daily;
We use Rim Strip to strip paint and powder coating from wheels and parts. You can purchase Rim Strip from Matt at Chem Express - 314-266-4600 Let him know 710 Performance sent you!
Inkbird PID Controller - amzn.to/34hY92s
3/8" Electric Solenoid Valve 12-VDC - amzn.to/34m0RDZ
9Pcs/Set Universal Vacuum Cleaner Attachments - amzn.to/34nKZRD
502 Piece Professional Plug Kit - amzn.to/3ghd7YN
40 Pc 1/16" to 3/4" High Temp Silicone Plug Kit - amzn.to/34kPTi2
5 Roll High Temp Masking Tape Kit - amzn.to/2CKAiNn
160pc High Temp Assortment Kit - amzn.to/3iTch64
20pc Extra Large High Temp Silicone Rubber Plug Kit - amzn.to/2FI4eeg
3/4" Wide High Temp Masking Tape - amzn.to/3gfFhn0
50 Piece 1/16" X 3/16" High Temp Silicone Plug Kit - amzn.to/2EfDdOx
124 Piece High Temp Silicone Plug, Cap, Masking Tape and Hook Assortment - amzn.to/2YiwdaO
Sony Alpha a7iii - amzn.to/3g1eZFO
Rode VideoMic Pro+ - amzn.to/2Bz9wHk
UGREEN Micro HDMI to HDMI Cable Adapter - amzn.to/34hFns0
Video Capture Cards, HDMI to USB 2.0 - amzn.to/3ha1RPb
Make sure and follow us on social media for more great and different content! If you would like custom powder coating, you can check prices on our website below!
710 Performance Instagram - / 710performance
The Powder Junkies Instagram - / thepowderjunkies
TL’s Instagram - / tl_subie
Jeremy’s Instagram - / jermjerm42o
710 Performance Twitter - / 710performance
TL’s Twitter - / tl_subie
Email 710 Performance at Info@710Performance.com

Авто/Мото

Опубликовано:

 

2 ноя 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 42   
@Aar0nReames
@Aar0nReames 19 часов назад
Great video
@georgeburns5811
@georgeburns5811 3 года назад
Good video! Nice to see different techniques compared like that.
@710performance
@710performance 3 года назад
Thank you! We’re going to test other colors and substrates as well to compare.
@nextlinkzcustoms6329
@nextlinkzcustoms6329 3 года назад
Very good job! Really stands out love the color choice..
@710performance
@710performance 3 года назад
Thank you! Most appreciated 💯🤙
@rodrigomarques2056
@rodrigomarques2056 Год назад
Awesome job!
@710performance
@710performance Год назад
Thank you! Cheers!
@8Slinkies
@8Slinkies 3 года назад
People say those who hot flock don't know how to use their equipment but we have to adjust our spray patterns accordingly. Its not easy to get a good finish with low end equipment.
@710performance
@710performance 3 года назад
no it's not, but you can if you just take your time!
@8Slinkies
@8Slinkies 3 года назад
I just did a D16 valve cover the other day, hot flocked the base and hot flocked the clear coat. Had a great finish with no drips.
@710performance
@710performance 3 года назад
Good stuff
@underestimatedgarage
@underestimatedgarage 3 года назад
Looks pretty good to me lol! i see a Mopar banner 👀 on the whip!
@710performance
@710performance 3 года назад
Thank you! Yessir there is a Mopar banner back there, Austin’s is finishing up here soon.
@simonac688.
@simonac688. 3 года назад
That was Hot...🔥
@710performance
@710performance 3 года назад
🤙
@jairojimenez5831
@jairojimenez5831 2 года назад
H thank you for the content, one question if I May, What's outgassing? And what's the purpose of that process?
@710performance
@710performance 2 года назад
You heat the wheel before you media blast them, we usually heat them at 420º (part temp) for 30 - 45 minutes. It's to get any contaminates out of the metal.
@mikemuniak4711
@mikemuniak4711 3 года назад
I went on the link for that kf-x1 gun but its not there ,and I can't find any info on where to buy it ,any ideas
@710performance
@710performance 3 года назад
We are not currently offering the system anymore, but you can purchase them from COLO
@austinsarver2413
@austinsarver2413 3 года назад
That spectrum fx looks sick! Did you clear over it, and if so does it affect the look?
@710performance
@710performance 3 года назад
no we did not
@dustinhodgkinson6377
@dustinhodgkinson6377 3 года назад
I cant seem to get into tight areas or sharp corners?? And if I do then I get orange peel.. idk wjat I'm doing wrong I follow tds sheet with IR gun
@710performance
@710performance 3 года назад
sounds like you're getting it too thick, or it's not heating up quick enough. what gun are you using?
@dustinhodgkinson6377
@dustinhodgkinson6377 3 года назад
@@710performance eastwood duel voltage with a dedicated ground running outside the building.. low psi just doesn't want to stick to sharp edges or if it does it looks like heavy orange peel
@timothyball6608
@timothyball6608 3 года назад
Kinda cool, you should do different base colors.
@710performance
@710performance 3 года назад
Great idea! Thanks Tim!
@MegaRickw
@MegaRickw 3 года назад
great job,valve cover looks super,bet it's a lot cheaper too
@710performance
@710performance 3 года назад
It cost us about $20 for the can with shipping, maybe $23.
@Fearless.coatings
@Fearless.coatings 2 года назад
Why did you switch from East wood pcs 1000?
@710performance
@710performance 2 года назад
Because we wanted a better system.
@robertrussell129
@robertrussell129 2 года назад
Hi. Very cool affect. Do you have a link to order a can?
@710performance
@710performance 2 года назад
We don’t but it’s easy to search online
@theartman410
@theartman410 2 года назад
LOOKS GREAT...great job,videos are getting better and got ride of that stupid YEAAAA shit.
@710performance
@710performance 2 года назад
👍😂😁
@ParkerOviedo
@ParkerOviedo 3 года назад
Is It tacky to the touch?
@710performance
@710performance 3 года назад
Nope. After 1-2 minutes it was totally dry
@nlfspeed3968
@nlfspeed3968 3 года назад
I’m sure someone from the ukc cheerleading team will have some comments on this I’m surprised I haven’t seen one yet. Looks like it turned out awesome though good job guys. #hotflocktheworld
@710performance
@710performance 3 года назад
Thank you! 😁🤙
@TheBowers647
@TheBowers647 3 года назад
I thought it looked great I ordered a can of it
@710performance
@710performance 3 года назад
We would love to see your finished project!
@TheBowers647
@TheBowers647 3 года назад
@@710performance will do do you think just about any type of topcoat would work all right with that
@710performance
@710performance 2 года назад
I would use a 2k clear
Далее
The truth about powder coating hot! - Ep 96
12:22
Просмотров 40 тыс.
How to Powder Coat Illusion Purple Powder Coat
8:46
How To Mask Threaded Holes before Powder Coating
10:06
So, you want to powder coat parts ?   Here is how I do it
19:38
How To Properly Powder Coat a Valve Cover
18:22
Просмотров 45 тыс.
How to powder coat - How to hot flock.
9:48
Просмотров 37 тыс.
Budget Powder Coat System THAT WORKS!
17:06
Просмотров 28 тыс.
Powder Coating Pretreatment
11:06
Просмотров 21 тыс.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 3,8 млн
Фишки FORD F-150. Часть 2
0:54
Просмотров 3,1 млн
Бмв сгорела , это нормально?
1:01