Power Commander 5 install on the Gsxr!

Подписаться 581

Просмотров 47 тыс.

50% 1

Lets get this 50 together!
We installed a Power Commander 5 (PC5) on my brothers 2011 Gsxr 600, we downloaded a map however sometime soon we will have a track day to see what results we get! Stay Tuned!
I don't own any music played I the video
All music rights go to owners/producers
Instagram - b3i1n_ht

Опубликовано:

7 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@HalilYenilmez_ Год назад

hey, i noticed the Gear Input & Analog input cables were worn out. I took them out to cut a bit and put them back in but now I forgot in what position they were connected. I have put them in according to the fold of cables, but the question is; would it be remarkable if they were wired incorrectly? Thank you.!!

@joserodolfoignacioperalta4687 3 года назад

Hello brother, I have a suzuki gsxr 1000 2009 and I am urging the pawer comander 5 of dino jet and I do not get rpm reading to put tuniar? , what could you be. I would appreciate your help. thanks

@Mihalyofficial 4 года назад

Im using fc and when i initially start the bike the rpms are very low is this normal? I can adjust the low mid high rpms on the box. Thx.

@jotaveparti7589 4 года назад

How you doing man.. Excuse me ask you a question, i have a 2019 gsxr 750 it is stock until now, i just remove the exhaust, so now its nothing after the catalytic. Sounds nice but i would like to take it off and add the power commander, which map is more appropriate for a straight exhaust? I will keep the butterfly to maintain the back pressure, plus i will add a sport filter. Other questions us about the quick shifter it allows? Thanks

@WorldStreetz 4 года назад

Sorry I'm just getting to this, we chose a that map because like an actual system there wouldn't be a catalytic converter to restrict anything on the system, since we removed it, once you add a p.c id recommend taking it to a good tuner

@Gsxrdannyy 4 года назад

Hey so i have a few questions. So I just got my PC5 for my 2007 GSXR600. First, the only readings I’m getting on the software is the Throttle percentage. Nothing else registers like RPMs or any of the other values on the right. Do you know why that is? Second. When I hit get map initially, the table already had data in it and not all 0s like how yours showed. Does that mean that it was previously tuned? Third, I’m not sure if I misunderstood you, but did you say you are using a full exhaust map even though you have a shorty installed? I have an Akrapovic shorty installed on mine and was wondering if I should go with a full exhaust map instead of the shorty map.

@WorldStreetz 4 года назад

It seems like your bike has been tuned if the values are not all 0's. We selected a full exhaust map because we were deleting the catalytic converter like how a aftermarket system would be despite not having a pipe, make sure everything's connected, wires tend to come loose sometimes

@daltonkreider68 4 года назад

I'm having the same problem with my 08 gsxr600 and I think what I did wrong was plugging into the top injectors and not the bottom, I'll confirm tomorrow.

@Gsxrdannyy 4 года назад

Dalton Kreider hmm 🤔 I didn’t even know there were different hookups for the injectors tbh

@gixxerlife6966 6 лет назад

Ya but it still has factory exhaust and headers!!

@WorldStreetz 6 лет назад

We only have the factory exhaust on for the street, because the bike is to loud when we switch the pipe. With the headers we removed the muffler and welded a piece of piping allowing the system to be "straight piped" .

@WorldStreetz 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NWlelSixaPM.html