Тёмный

Powermate Generator Not Making Power - Can it Be Fixed? 

James Condon
Подписаться 184 тыс.
Просмотров 164 тыс.
50% 1

I picked up this Coleman Powermate generator from Craigslist. It was listed only for $50 with a good running Subaru EX21 engine, but putting out very little power. Before tearing it apart to harvest the engine, lets double check the health of the stator and rotor to determine if the powerhead is terminal. Any who knows, maybe I can fix it.
Generator Model: PM0433500
Capacitor Part #: 0065134
Airbox Part #: 277-32622-20
Multimeter: amzn.to/33zTURv
Insulation Tester: amzn.to/3dWExVi
Ultrasonic Cleaner: amzn.to/3qkezkn
Leather Punch: amzn.to/31Uu5v3
Test Tank: amzn.to/33tfVBf
Kill A Watt: amzn.to/3m8KToO
Load Tester (Space Heater): amzn.to/3F2ZGJe
I use Harbor Freight Super Heavy Duty Degreaser in my ultrasonic cleaner www.harborfreight.com/1-gallo...
Visit My Amazon Store:
www.amazon.com/shop/jamescondon
If you want to donate to the channel, you can use the RU-vid "Super Thanks" feature or via PayPal: www.paypal.com/paypalme/james...
#GeneratorRepair #SmallEngineRepair #SmallEngine #DIY #Fixed #Troubleshooting #HowTo
00:00:00 Intro
00:00:56 Oil Check
00:01:07 Engine and Stator Test
00:02:11 Out With The Old
00:03:58 Stator Low Voltage Insulation Test
00:11:28 Capacitor Test
00:12:38 Rotor Low Voltage Insulation Test
00:14:50 High Voltage Insulation Test
00:19:14 Capacitor Issues?
00:22:19 Cleaning Up The Carburetor
00:33:48 New Capacitor Install
00:36:32 Powerhead Test - Place Your Bets
00:38:07 Load Test
00:42:05 Cleaning Up The Mess
00:52:03 Coming Together Nicely
01:04:03 Airbox Finally Arrived
01:08:06 Final Test
01:09:52 Conclusion

Опубликовано:

 

26 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 507   
@troyyarbrough
@troyyarbrough 2 года назад
There is just something oddly satisfying about watching you take a non-working generator, lawn mower, etc and working your magic to make them useable again. You made this old genny not only work again, but made it look 500% better than when you got it. Thanks for taking me on these journeys with you. By the way, I can't count the number of times I've had to cut my own gaskets for projects.
@raymondgarafano8604
@raymondgarafano8604 2 года назад
I had to make a few gaskets and the auto parts place was closed. my cuz was getting his plc redone and something told me ta go there. he had a fair amount of Ram Board temporary flooring and I found it to be great for gaskets for carb bowls and intake manifold gaskets between carb and block.
@lawrencepevitts2434
@lawrencepevitts2434 2 года назад
So far the guy didn't lie, it does need brushes. That carb cleaned up real nice. The before & after is amazing. You're a miracle worker. Love your videos.
@Darryl603
@Darryl603 2 года назад
It goes to show that you can never take the customer's word for a diagnosis. Just start from square one and troubleshoot the unit with a methodical approach. If you follow a theoretical, systematic flow chart, eventually you will arrive at the problem. Also, a sharp eye that comes with experience goes a long way too. Great job James
@dquick282
@dquick282 2 года назад
Just finished the video and love how you clean up things as well. Not too many people have this drive to tear the engine out and paint things. I appreciate your passion to make things right. Keep making great videos.
@jeffclark2725
@jeffclark2725 5 месяцев назад
I just picked up a Twin to this with a running Subaru engine, no output,I did the same checks you did, when I took the back coveroff,the capacitor was blown up,replaced it and it works again, great video
@jerrybootneck1736
@jerrybootneck1736 2 года назад
Your attention to detail is exemplary and I'd buy a generator off you any day.
@giggiddy
@giggiddy 2 года назад
Merry Christmas my friend. Been watching you from the beginning and you remain at the top of my RU-vid list. You are still calm, no drama, intensely diagnostic, and infinitely consistent. Thats almost unheard of, with most creators more focused on creating a brand than creating solid content. Thanks again James.
@jcondon1
@jcondon1 2 года назад
Thanks for the feedback. I never expected a following, but am happy for it. Have a Merry Christmas.
@charlesbarnard4040
@charlesbarnard4040 2 года назад
Thanks for all these wonderful videos James. I cant tell you how much I enjoy them. I've learned so much from you and I really appreciate the time that you put into your channel. Incredibly invaluable info for someone learning about small engines and generators. I recently watched a Mustie1 (another favorite channel) video and directed to him to a video you had done in the past on the same (or very close) type of generator. After I made the post, I realized that you had also commented on his video and explained what steps you had taken. Very, very cool to see that you also watch and even try and help other RU-vidrs. 👍. Thanks again and I Hope you have a Merry Christmas and Happy New Years.
@jcondon1
@jcondon1 2 года назад
Thanks for the feedback. I enjoy watching others make the same repairs that I do. Always looking to help out others. Have a Merry Christmas and a Happy New Years!
@bryandowdey1779
@bryandowdey1779 2 года назад
It must be very satisfying for you to make a very decent and well operating generator out of such a rusty and dirty old machine. Great work. Your attention to detail is good to see and hopefully very encouraging for others to bring back to life old engines and generators. I wish you and your family a merry Christmas and a happy and healthy new year!
@jcondon1
@jcondon1 2 года назад
Thanks and Merry Christmas
@w2dmw
@w2dmw 2 года назад
Well, through the quagmire of this brushless system, once again, you have taken us logically, through the diagnostics, and located, and repaired the problem. Bravo, Jim...!!!
@michaeltarasenkoop2389
@michaeltarasenkoop2389 2 года назад
James your videos just glue you to your show I could watch the videos for hours and not get bored with watching your knowledge at work ! Also learning how to work on small parts without breaking them ! I used to break parts by over tightening nuts and bolts you using a torchwrench really impressed me never had or used one !
@jcondon1
@jcondon1 2 года назад
I have made the same mistake and watched plenty of others do the same. These bolts are small and easily break or strip out.
@scottdenhamrealestate7716
@scottdenhamrealestate7716 2 года назад
Another great save James! All these generators have increased your parts pile to complete any project. I hope you are having a great holiday season and even better things for 2022
@jcondon1
@jcondon1 2 года назад
Thanks Scott. Hope you have a good 2022
@FeralPreacher
@FeralPreacher 2 года назад
Merry Christmas, James. Your ability to go the extra mile and make the unit perfect is commendable. May you and the family have a healthy and happy Christmas season. Thanks for sharing.
@jcondon1
@jcondon1 2 года назад
Thanks! You too
@Melicoy
@Melicoy 2 года назад
@@jcondon1 what about the elephant in the room.... rust from the tank into the carb :( can that be fixed?
@tomtee4442
@tomtee4442 Год назад
@@jcondon1 do you sell any of your generators and equipment? Where are you out of if you do?
@dalemartin9948
@dalemartin9948 2 года назад
Wow! I enjoyed watching you work on the repair and restoration of the generator. For me that was an amazing video to see. Thanks for the Christmas gift.
@brad9529
@brad9529 2 года назад
I love when you fully restore them like this video, you do a good job, they look great.
@jcondon1
@jcondon1 2 года назад
Thanks
@drmikeosgood
@drmikeosgood 2 года назад
Well James, I do really enjoy watching you go through the testing series and carborator break-down. I'm glad subscribe your work as I did. Keep up the great work.😄
@josejoakingallastegivilanu9475
@josejoakingallastegivilanu9475 11 месяцев назад
We have used the ru-vid.comUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!
@wildefox1478
@wildefox1478 2 года назад
Great video, that was a deal on that generator for only $50 when all it needed was the right capacitor and a good carb cleaning, nice work James!
@w056007568
@w056007568 2 года назад
An excellent video on the resurrection of this unit for proceeding through the assorted stages of testing and checking of both the engine and the powerhead and ultimately finding the electrical issue. I was most surprised how well the engine started and ran on oldish fuel and with all that muck in the carb bowl! Your efforts on tidying up the machines appearance have improved it no end.
@jcondon1
@jcondon1 2 года назад
It was surprising how well that carb was running the engine. Have had plenty that look perfect but run poorly or not at all.
@ericvaughn1126
@ericvaughn1126 2 года назад
Great find and save for $50 plus the capacitor and air box parts! Invaluable testing and troubleshooting documentation for anyone chasing the same issue. Thank you for your contribution in that regard. We could sense your lack of enthusiasm for having to do all the detail work to get it looking good once you realized it was going to make power! That's funny and kudos to you for spending the time cleaning up that tank. So annoying when folks over spray paint onto such things. I've used Good Off and Goo Gone to clean up over spray on small engine equipment before. Just have to be careful as sometimes strong enough to remove paint too. Anyway, "must see" RU-vid content for sure and Merry Christmas to you and yours!
@jcondon1
@jcondon1 2 года назад
Goof off works well, but definitely need to test it as it can cause issues. Have a Merry Christmas.
@AntonioClaudioMichael
@AntonioClaudioMichael 2 года назад
I'm impressed that carb ran and ran so well with the amount of rust and water it had in it and the bowl just wow @23:12 @James Condon
@jcondon1
@jcondon1 2 года назад
It is always surprising to see one like that run as well as it did.
@AntonioClaudioMichael
@AntonioClaudioMichael 2 года назад
@@jcondon1 yeah it is
@brngrofdeth
@brngrofdeth 2 года назад
It sat long enough to turn to paste in the bottom of the bowl. If it was in fact charging and in use, it would have eventually cleaned up and vibrated loose with more fuel and completely messed up the carb. Good thing they gave up and let it collect dust.
@BBDragon66
@BBDragon66 2 года назад
I was thinking the same thing 😉😉
@jared5862
@jared5862 2 года назад
Another great video! I can’t thank you enough for all the detail you go into on these. I recently commented on some videos about my old GP5500 with the broken rocker that your videos helped me fix and then I found out that the power head went bad while it was sitting. Well thanks to your videos I fixed that too and now have a working generator again. The culprit ended up being a muddobber wasp nest that was built right on the wire bridge that connects the two windings on the rotor. It corroded the wire bridge in two. I took a new piece of wire and soldered it back together and bingo. She’s now sending the proper voltage to the receptacles. Thanks for all your awesome videos. Merry Christmas and keep up the fine work.
@jcondon1
@jcondon1 2 года назад
Very nice. Glad to hear.
@aymannabil9
@aymannabil9 2 года назад
Oh my God.. Well.. This called a factory work and as usual I like the way you analyze the defects and going step by step to find out the problems with the generator. You really made me going crazy with your work despite the generator looked so bad at the beginning but at last you made it looks like a brand new one.. Anyway merry christmas Mr. James and thanks a lot for your detailed explanations👍.
@christophermarshall5765
@christophermarshall5765 2 года назад
Good job. That capacitor shifted the whole job completely. Cheap generator. Merry Christmas.
@vmaxride06
@vmaxride06 2 года назад
Very much always appreciate your ability to connect with your viewers . The best .. Merry Christmas to your family and all of your subscribers.
@brngrofdeth
@brngrofdeth 2 года назад
Super score! Can't beat that. Excellent job James! Thank you for sharing your knowledge. Love, blessings and Merry Christmas!
@kevin34ct
@kevin34ct 2 года назад
Great job with this one, after all the repairs and work on the frame it looks brand new.
@rbassettjr
@rbassettjr 2 года назад
Merry Christmas James! Thanks for all the videos!
@hirampritchard5588
@hirampritchard5588 2 года назад
Wow, I loved that home made spray booth and the results were great.
@mickthwaite
@mickthwaite 2 года назад
It is great to see you upgraded your Megger from the hand crank. Happy to see you used primer undercoat on the frame, a great video as always.
@jcondon1
@jcondon1 2 года назад
Thanks
@YukonHawk1
@YukonHawk1 2 года назад
Another outstanding job. I did notice on the new air box that there was what looked like a place for a factory punch out for breather tube like the OEM. That's a moot point. Anyway, great paint job and clean up on a really nice genny. Merry Christmas to you and your family. Continue to stay healthy.
@jcondon1
@jcondon1 2 года назад
Thanks Paul. The new box could have been modified. Merry Christmas to you and you family.
@rossrossier935
@rossrossier935 2 года назад
Merry Christmas James. You just gave a dose confidence on a 2200 watt,same type, that I'm trying to diagnose,great video!!
@kerrygleeson4409
@kerrygleeson4409 2 года назад
Thank for sharing James learning a bit more each time 🦘🇦🇺👍
@francisbailey3831
@francisbailey3831 2 года назад
Ben Bailey, Good morning, James. You are the master generator technician. As I say, that if you are going to do a job, do it well as you always do. From North Carolina to Massachusetts, Merry Christmas to you and your family. Be Safe and enjoy.
@jcondon1
@jcondon1 2 года назад
Thanks. Merry Christmas and a happy new year.
@andrewgrace4410
@andrewgrace4410 7 месяцев назад
Great restoration and troubleshooting James 😊
@TerryLawrence001
@TerryLawrence001 2 года назад
A truly Satisfying rebuild! Awesome work!
@jonminer9891
@jonminer9891 2 года назад
Merry Christmas, James. Thanks for sharing! Stay Healthy!
@michaeltarasenkoop2389
@michaeltarasenkoop2389 2 года назад
Amazing as to the knowledge that. You poses with a person with no knowledge your show is amazing!
@tonym6920
@tonym6920 2 года назад
Just wanted to thank you for sharing your expertise in your excellent videos. Have a safe and wonderful holiday season!
@jcondon1
@jcondon1 2 года назад
You too, thanks!
@additudeobx
@additudeobx 2 года назад
and yet another genny receives a second chance at life through the hands of Master Condon. Merry Christmas James...
@jcondon1
@jcondon1 2 года назад
Thanks! Merry Christmas
@tedheierman1181
@tedheierman1181 2 года назад
And excellent researching that it had the wrong part installed by someone else! There's so much good information out there if we look for it.
@Hugo_Overthere
@Hugo_Overthere 2 года назад
James, I like your videos for the fact that you clean up your products.
@piconano
@piconano 2 года назад
Thanks for another episode of "Trash to treasure". It was very informative as usual. Merry Christmas & happy new year to you and your family.
@jcondon1
@jcondon1 2 года назад
Thanks. Merry Christmas and a happy new year to you
@JpJp-zd7vu
@JpJp-zd7vu 2 года назад
Another Great video James , enjoy youre thorough testing procedures ! This one was Truely a lobor of love. Wish you & you're Family a Merry Christmas ! 🎀
@jcondon1
@jcondon1 2 года назад
Thanks. Merry Christmas to you and your family.
@martynbuzzing3327
@martynbuzzing3327 2 года назад
Merry Christmas. I’m finding out so much about fault finding generators . I’ve already ordered a kilowatt tester. Thanks 👏👏👍
@jcondon1
@jcondon1 2 года назад
Nice
@marcelcanuck
@marcelcanuck 2 года назад
always enjoy the videos your troubleshooting skills are extraordinary , i pick up a new trick from every episode 👍
@presmak0542
@presmak0542 2 года назад
Your videos are so great that i have to watch twice, Merry Christmas!!
@jcondon1
@jcondon1 2 года назад
Thanks, Merry Christmas!
@stevecarter529
@stevecarter529 2 года назад
As usual interesting and informative. Thanks very much and happy Christmas and new year.
@martinflanagan2506
@martinflanagan2506 2 года назад
Another great video James, I find laquer thinner works great for removing overspray and grease and grime, much faster than alcohol. Merry Christmas and Happy New Year. Nice restoration.
@waynebrundidge206
@waynebrundidge206 2 года назад
Thanks for the video for a brushless generation. I learn more from each video, thanks
@RK-kn1ud
@RK-kn1ud 2 года назад
Subaru...surprised it didn't have a blown head gasket like all of their cars! I see you found the forbidden orange soda!
@deangentles4966
@deangentles4966 2 года назад
Hi James great sitting in your class again mate prefect job it always looked to good for the parts bin
@jcondon1
@jcondon1 2 года назад
Thanks Dean!
@Rev-D1963
@Rev-D1963 2 года назад
And the ugly ducking became a beautiful swan once again! It's awesome to see a basket case like that generator come back to life, and look good at the end too! Merry Christmas, God bless you and your family James, and thanks again for your great videos. Rev. D.
@jcondon1
@jcondon1 2 года назад
Thanks. Merry Christmas and God bless you and your family.
@tempusveritas8901
@tempusveritas8901 2 года назад
You have to love copper windings! Merry Christmas James
@larrykelly2838
@larrykelly2838 2 года назад
Great job and tutorial Doc., I learned a lot from your electrical knowledge, I appreciate your skills.
@jcondon1
@jcondon1 2 года назад
Thanks Larry
@arthurbiringer5676
@arthurbiringer5676 2 года назад
An excellent job as usual! The machine runs perfectly!
@arthureverett8220
@arthureverett8220 2 года назад
I am a retired electronic tech that repaired TVs,radios,pinball machines,juke boxes,video games. I am learning much from your videos. I have never heard of a brushless generator. This must be a newer unit. I got out of the consumer business when they went to surface mount components
@daleyurk4369
@daleyurk4369 2 года назад
Nice job on that frame. Looks great. Good video!
@jmonte2811
@jmonte2811 Год назад
Another great lesson by the Master Professor. Thanks sir!!
@hectorarroyo2285
@hectorarroyo2285 2 года назад
Hi Mr. James !!! Excelent job!!! Thanks... Merry Christmas!!! Happy Hollydays!!! 😁😁😁😁
@jcondon1
@jcondon1 2 года назад
Thanks. Merry Christmas and a happy new year!
@George-mn4wf
@George-mn4wf 2 месяца назад
Grand! I love the diagnostics process!
@mastertech7104
@mastertech7104 2 года назад
Thanks James, nice work. Merry Christmas.
@jcondon1
@jcondon1 2 года назад
Merry Christmas
@noelcastle3986
@noelcastle3986 2 года назад
Another great repair and resurrection well done and Merry Xmas to you and your family, I appreciate the time and effort you put into these videos they make my day have a good Xmas break with your family stay out of the garage for a few days ..
@r8118830
@r8118830 2 года назад
Another lovely video James.
@KensSmallEngineRepair
@KensSmallEngineRepair 2 года назад
Wow, talk about the fiddle fairies! Another great vid Jim, hope you and yours have a safe, happy, healthy holiday!
@jcondon1
@jcondon1 2 года назад
Thanks Mick. Have a happy holiday.
@KensSmallEngineRepair
@KensSmallEngineRepair 2 года назад
@@jcondon1 Mick? You forgot me already!!!!
@Big_Johns
@Big_Johns 2 года назад
Bahahahaha.... I can see the resemblance too James. 🤣🤣🤣
@KensSmallEngineRepair
@KensSmallEngineRepair 2 года назад
Oh boy here we go again……..
@billkrause4585
@billkrause4585 2 года назад
Perfect, and it looks new! When you were cleaning that gas tank it was when I went THUMBS UP!
@MrKidi39
@MrKidi39 2 года назад
As always, great content. I’m looking at a home generator that’s on a warehouse we are renovating. I hope I can get it!
@ComputerTechNL
@ComputerTechNL 2 года назад
Nice video's this year. Happy holidays!
@jcondon1
@jcondon1 2 года назад
Thanks
@rmoby
@rmoby 2 года назад
Beautiful job James
@Bassguitarist1985
@Bassguitarist1985 2 года назад
Amazing restoration! Thankfully I haven't come across a machine to do that much paint work but how you painted the frame with the rolling Dolly and cardboard I will certainly use that in the future! Merry Christmas to you and your family looking forward to working together soon!
@jcondon1
@jcondon1 2 года назад
I wish I could say the was the first I picked up with this much frame rust. At least the tank was plastic. Merry Christmas and a happy new year.
@Bassguitarist1985
@Bassguitarist1985 2 года назад
@@jcondon1 oh yeah if it was metal whoa that be a project. You would have to reseal the inside so it won't rust again.
@somerandomguy3868
@somerandomguy3868 2 года назад
You make it look easy, I know you put a lot of time into this generator and some good money for not cheap parts
@peterwildey5865
@peterwildey5865 7 месяцев назад
Merry Xmas and a Happy New Year James.. will have a bir or three for you later today Ankor 😊
@rstephe
@rstephe 2 года назад
Another outstanding breakdown and explanation. Thank you for sharing.
@dukesworld3020
@dukesworld3020 2 года назад
You did a great job on it. I'm working on two that I got at an auction. Good video!!
@regreed.508
@regreed.508 2 года назад
hi there brother,I like the way you explain things keep the good work up. Thanks
@iranmihanemast7032
@iranmihanemast7032 2 года назад
Another great repair and tutorials.
@watermanone7567
@watermanone7567 2 года назад
Thanks for this years great video's. Merry Christmas and Happy New Year
@jcondon1
@jcondon1 2 года назад
Thanks and Merry Christmas
@gullfaks
@gullfaks 2 года назад
Felt like 10min... Happy christmas to you from me in snowy Norway.
@jcondon1
@jcondon1 2 года назад
Merry Christmas and a happy new year!
@loucinci3922
@loucinci3922 2 года назад
Another great video. Made it look like new. Thanks for sharing
@williamlockhart5031
@williamlockhart5031 Год назад
Nice restoration!
@benlyons7752
@benlyons7752 2 года назад
Outstanding. Nice job cleaning up this motor and catching the capacitor
@jcondon1
@jcondon1 2 года назад
Thanks
@paulsto6516
@paulsto6516 2 года назад
Love to watch you work, man.
@jcondon1
@jcondon1 2 года назад
Thanks
@citichap
@citichap 2 года назад
Great video. Merry Xmas James
@jcondon1
@jcondon1 2 года назад
Thanks! Merry Christmas and a happy new year
@shawnmrfixitlee6478
@shawnmrfixitlee6478 2 года назад
Great work James ! Merry Christmas to you and Your Family .. God Bless
@jcondon1
@jcondon1 2 года назад
Thanks Shawn. Merry Christmas to you and your family as well.
@tombarlow6176
@tombarlow6176 2 года назад
Good day to you mister what a wonderful peace of work and I learn a lot from you . Keep up your good work 👍😃👍😃
@jcondon1
@jcondon1 2 года назад
Thanks
@steveferguson3705
@steveferguson3705 2 года назад
Merry Christmas from Canada have a happy new year
@jcondon1
@jcondon1 2 года назад
Thanks Steve! Have a Merry Christmas and a happy new year!
@chriholt
@chriholt 2 года назад
Nice job - it looks and runs awesome. I was kinda hoping you'd take care of the overspray on that awesome little Subaru engine. Anyway, Merry Christmas to you and yours!
@jcondon1
@jcondon1 2 года назад
Thanks and Merry Christmas to you and your family.
@michaeltarasenkoop2389
@michaeltarasenkoop2389 2 года назад
With all of these problems if you get this unit running you are a wizard of great proportions bar non !
@43mackmobile
@43mackmobile 6 месяцев назад
Those old Toro mower wheels have seen better days, nice find on the capacitor.
@hanksbud2544
@hanksbud2544 2 года назад
Greatvfind. Great videos, always learn something from them. Thank you.
@jamesdiehl8690
@jamesdiehl8690 2 года назад
Merry Christ - mas James!
@jimsbagels1991
@jimsbagels1991 2 года назад
It was very satisfying watching that frame get repainted
@davidbohner692
@davidbohner692 2 года назад
You have literally made a “silk purse it of a sow’s ear” outstanding job. 👍🏻👍🏻👍🏻👍🏻👍🏻👏👏👏👏👏⭐️⭐️⭐️⭐️⭐️🎅🏻
@davidbrown4868
@davidbrown4868 2 года назад
Thank you, I learned a few new things from you. Very good!
@agentcovert
@agentcovert 2 года назад
Great video tutorial as usual..Thank you..
@henrymurawskibigdogrepair
@henrymurawskibigdogrepair 2 года назад
Nice job James looking good 👍
@jcondon1
@jcondon1 2 года назад
Thanks Henry
@alanrobison3298
@alanrobison3298 2 года назад
Great job my friend!
@TheKandyGuy
@TheKandyGuy 2 года назад
Good work man.. love it..!! be well and be safe..!!
@jimmeroniuk8266
@jimmeroniuk8266 2 года назад
Nice to see you upgraded to hollow ground screwdrivers. Good choice
@jimanddiana4103
@jimanddiana4103 2 года назад
Really enjoyable. Thanks Jim.
Далее
Baldor Generator Not Making Power - Can It Be Fixed?
55:24
Каха заблудился в горах
00:57
Просмотров 597 тыс.
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
How To Dig The Perfect Post Hole
16:26
Просмотров 320 тыс.
Trashed NGK Generator - Will it Run and Make Power
51:38
Flooded DuroMax Generator - For Parts or Repair
35:44
Просмотров 136 тыс.
How Generators Work, And How To Fix Them.
58:48
Просмотров 962 тыс.
I Don't Get Why People Still Use These Joints
17:26
Просмотров 521 тыс.
New Storm Responder Generator Stopped Making Power
56:25
Vintage Honda EM500 - High Voltage Problem
1:19:52
Просмотров 289 тыс.
Generator Runs But Low Voltage
48:09
Просмотров 135 тыс.