Precision Power Complete step by step install for Harley Davidson with Cue from Riding and Wrenching 

I can tell the owner of the bike is no stranger when it comes to doing his own work. Great job!

Just came across this company/channel. I was on the verge of taking my ‘16 Roadglide to the dealer to have them fix my audio issue. After watching this and knowing the simplicity of your products/harnesses you provide, I will be tackling this upgrade by myself with one of your packages soon. First rate content! Hate watching videos that skip through, causing pitfalls for amateurs like myself 👌🏻💯

Love the ride Cue, following your channel

So cool!

Great video as always. I’m very impressed with the detail and wealth of knowledge you share, it’s appreciated. Installing my Infinity set I ordered from you today, you guys have been great and I really the speed of everything especially communication & shipping I’m very impressed.

Great Video!

Great video and a beautiful bike!!!!

Great video

GOOD SOUNDS !!!!

I learn a lot from that video and put my total t Trust in the way that you accomplished having him feel like he was really completing it all by himself he was really proud of himself and I know you are a Hands-On guy but you only instructed and stepped in when you only needed to step in I need to bring my bike to you so that you can help me pick out the right equipment to install in my 2010 CVO Street Glide thank you

Amazing quality and install.

Cue you have to do the lowers. All your sound when you ride comes from the front. Love Riding and Wrenching. Enjoyed the video. #Keep Gliding! #Memphis Glide!

Great video! Next time use a garbage bag in the saddle bag & close the lid. The bag will catch all the shavings & makes for a fast cleanup.

Awesome video Jay Do you plan to review and install the PPower drop in subs

How much is a complete installation for the hertz stage 4 with sound stream radio?

I feel confident in doing my own system now. The only question is how would I do the mid-bass in the saddle bags. How to cut the holes out. That’s my only issue. Any help please

Surprised you didn’t mention the sound deadening for the speaker pods. Soundskin’s product.

Great video! I have the baja lights on my road glide. Can I use foil tape or any other means to waterprrof the thumb control module since it's not waterproof?

Sounds great! I’m interested in a 19 CVO streetglide 6 speaker replacement using the precision power amp and speakers keeping my head unit. Do you offer a plug n play kit for precision power yet?

I'm interested in getting the same setup minus the radio. I have a 2021 road glide limited. need 6 speaker setup with lids cut kit.

Have you installed Eight Speakers on Ultra CVO or Limited or CVO Road Glide Limited..!!! I could not find details on your website.

Great video… what did you do with the GPS cable?

The GPS antenna is not used and assumes your phone is connected. Is there a backup plan if I lose of forget my phone, or am just out blasting for a couple of days and leave my electronics at home?

I'll add a few comments with the questions I had and the issues I ran into as I just completed the same kit and amp but did Hertz speakers.....1. The amp you want the power to go towards the rear of the bike, not towards the front. 2. The power and harness, if you could show exactly where you are pushing it through, as mine goes around a corner since I couldnt get it to exactly fit where the factory harness is (there is a clip that the factory harness goes through that I couldnt get the new harnesses through so I may need to go back). 3. On the precision power speaker cutouts I REALLY wish I would have known to follow the OUTSIDE line vice the inside, as I fought and fought to get my grills flush (they still arent flush to where I would like at this point because the holes I cut are still a bit too tight if I had to guess). I always cut to the inside of any line so now I am somewhat stuck as I am not sure where I need to trim extra. 4. The screws for the grill kit area PAIN to get in!!! Try and be patient and do the front screws first and you will finally get them in. 5. With the Precision Power speaker kit it has a rubber gasket so DO NOT use silicone. (I used some anyhow because of the fitment issues I ran into and will eventually have to correct it.). 6. It would have been nice to know that I needed to make the hole bigger for the grommet!! LOLZ I wish mine would have gone as easily as J and Q's did, as I would simply walk away and cool off when I ran into issues and ended up taking a LOT longer since it was over 100 degrees in my garage (I mounted the amp wrong (following the instructions I used the plate for the streetglide and had to go back and remove it (once I called and was told to use the velcro and not the screws even though you guys had to mail me a screw kit LOLZ), I had to run the power a few times as I couldnt get enough slack due to the fuse holder not making it outside the wiring box (Its still very tight, I may go back and look at how its ran), I ran into issues with my holes for the speakers being too small and I think they still are (mine arent perfectly flush and I think will leak), due to that, getting the holes lined up was extremely difficult, the grommet hole was totally too small and I finally surrendered and made the hole bigger. Other than all those issues my install went fine.... LOLZ. I think the system sounds GREAT, I rented and returned the flash computer (I coudlnt get the carplay flash to work so I put my cheater whim plug back in), and the speaker terminals from Harley are super loose and the ones from your harness are SUPER tight...I bent one speaker pin but its all currently working fine :D TAKE ALL THIS WITH A GRAIN OF SALT....ITS NOT MEANT TO BE NEGATIVE....this was my fist time doing this and I am one of those guys who is a perfectionist. I am 100% satisfied!! I called into Volunteer Audio while doing the install and they were 100% on top of it!! THey next day shipped some parts for me, I used thier flash tool and they included a shipping label for return, the bike sounds FANTASTIC and there is NOWHERE else I would call to do this!!

On other videos you say to reverse the wires for the bags because of the backbone wire being backwards in the connection

I didn't get the grills for my front speakers. Only the round grill covers which I will not use. 😢

Which precision power amp was used? How many watts was it? Isn't there a 4 channel 600 watt PP amp? What is the price? Hertz also just came out with a 900 watt 4 channel amp...Has Volunteer audio received it?

Is the amp powering all the speakers

Hey, Can we do my Harley Triglide CVO?

That sounds good…. No dsp.. 👀👀👀… what’s Q’s discount code ? Lol..

If you want to listen to music stay at home or get a car the only music I want to hear is that MOTOR😂😂😂😂😂😂😂😂