Predator 212 Go Kart Mikuni 22mm Nitrous / Nos Install 

If you will drill and tap the carb adapter and feed nitrous there it should be a noticeably better maybe like a revisit

thats what i had been looking for brother really appriciated

Man, I've never been able to get a Mikuni tuned right, but I do love the round slide, there is zero loss of motion.

This is so cool! Keep up the good work on the videos man. I love this one.

Simple instead of spending 60 bucks just go buy you a 1 lb nitrous bottle used and a fogger nozzle that's all you need plummet to your intake, and of course make sure your carb is jetted for it and you got a way better looking nitrous kit then some tiny little CO2 bottle. Besides I think nitrous is like between 15 to 35 cents a pound depending on where you live other than that great build it's nice to know you can actually pull some power out of some things as long as they're tuned right I'll make sure you got the right exhaust system to.

Hello Red Beard. Ijust finishded my Generator. I had to take it apart several times to get it right!. I used the 7hp crank and puston. the pistion and crank that came with my new predator 6.5 hp was incorrect for my application. the rod journal was too small to use the new piston. so i cleaned up the old one. it was 6 months old so it looked great. great tip on using antiseize on the flywheel and generator connections to the crankshaft. they come apart easly. after a days work I got er Done! the crankshaft is shorter on the 7hp and the new predator has a hemi head and better valves. I set the valves at .004 .and I also used the 7hp camshaft. it had a bigger spring on the cam govenor. it runs great! I think the engine has more ccs now with the changes made .the old head was flat bottom. the engine runs great on propane ,with lots of power! I will run it mostly on propane because it burns cleaner, resulting in less carbon buildup in my engine. now I guess I will build my old motor totally radical next. where can I buy performance parts online?

No problem,you deserve it and have earned it, for real.Fan for life

Thanks, its not for a gokart though,. It's for my occ schwinn.mini bopper, can't wait for wiring video. Will send you some pictures when done. Just wanted to say thank you again for all your help. Rich

You shouldnt use teflon tape anywhere near fuel.. it will deteriorate the tape and it will gum your carb up. You should use a bit of silicone sealent like permatex.

Do you actually feel it kick in? Or would I see better gains from a cam swap? Can you reject it to inject more? I’d like to see bigger bottles forsure.

I saw those Hot-Wheels in the back ground, =) I collect them also. Nitrous Go-kart, way cool dude.

Just ordered the carb kit, I'm tired of jacking with the stock carbs, plus we run a pulse pump and had to install a tee to also send some of the fuel back to the fuel tank. that sure helped control fuel delivery to the stock / modified carbs.

if the line for the nitrous was shorter would make more power it's a long way to travel for such a little bottle

Hello Red Beard! I am a huge fan, and I really do appreciate these upgrade type videos. The nitrous is really cool, but it would be really awesome if you could do a video on a turbocharger for the predator 212. ☺

please do a timed point to point with just motor and then with nitrous so we can compare the real world differences. also just a piece of advice but you should never use teflan with nutrous. it will harden and break off teflan chunks that can end up passing into the carb.

It's a little cleaner look if you install on the manifold just a idea it's easier and guarantees no metal shavings imbedded in the filter just awaiting to dislodge the other reason I came up with this ideas cuz I don't like shitt sticking out their hella far just like the header pipe sticking out there aways I had to Tuck mine away

I'm really enjoying the videos man, keep up the good work.

Thank you go power sports and red beard 🚀🚀🚀🚀🚀🚁

Just installed this on the pocket bike on my channel!

Also would make sure your not pushing fuel the wrong way in the carb since the way you have it set up will pressurize the venturi

Hayo sopo sg rene gara² kepo pgn ero nos e brondong dekek endii wkwkwkwk ...

Funny to see how you used film compared to now. Framing up that wall in the shot makes you look short. Pretty funny.

my name is mark and I just started to watch your videos on RU-vid and iv fell in love whith them and I subscribed so I can watch them and I also like to work on go karts and the machanic world of cars and bikes keep up the good work man and ill keep watching your videos

i think its sooo fake why dont u show when you activate the nitrous ? and these cartridges are so small

6 sigma is the name of a quality control process

mmm, nachos kit... I love it!

Red Beard, Im fairly new to building my own motorized beach cruiser/trike.....been watching your videos and learning a lot, my question is, the second air filter, where is it attached and where can i get one?

CORRECTION! that is NOT a 22mm carb! it is a model #VM22 which is actually a 26mm carb!

Yeah...that made a difference! Very cool.

Great vid brother keep it up. On the nitrous port get something with a nozzle it might direct the shot better or atomize it better.

Need to put a nozzle inside the intake manifold that is jetted correctly and simed directly at the intake valve

You a thumbs up for.....THE BOOTS!!!

you should put it on the intake bc if you put it in the air filter it's gonna blow some of it out of the filter

Rick on RBG🤘

Don’t put a 4 gram whippit noz cart on a bone stock gx160 with the governor removed. I made a home made capsule with puncture tip to hold the noz tube built out of metal end caps and a plastic tube with a hole drilled with a hose nipple screwed in with a sharp screw inside job welded. hose attached leads to a ball valve leading to a nipple drill mounted into a cone filter mounted on a stock gx160 carb. Disintegrated the rod after reaching roughly 40mph

red beards a savage dude has gats mess wit his bikes he has firepower lol nice 👌

sounds like you sayin natcho kit sometimes hejeh nice vid

Would be a lot better with the line as short as possible due to the small size bottle most of the N20 is in the line.Great vid

You put your teflon tape on the fitting backwards.

Dude ur vids r awsome best ive seen

You can get a bigger end for a larger shot

How do you tell the carb there is more oxygen than usual, so it can add more fuel? To me it looks like that nitrous kit is just causing a lean condition. I think you need a wet nitrous system for carb engines? Or is there also fuel inside the whippets?

sealing with teflon tape... to an air filter?i think you filter might leak a wee bit more than that connection.

Hi Red! Thank you so much for the Videos! Very informative! My son and I are building a minibike using a Tillotson 212cc Hemi and changing the carb to a Mikuni 24mm Flat Slide..the question we have is do I need to add a fuel pump to make it run richer for the NOS add on and is there a such thing as running it too rich and would it hurt anything? The Tillotson is mostly stock except for the better filter,exhaust and carb...not sure if I need additional fuel via a bigger carb jet and or additional pump...once again thank you so much for helping us novices ! Your the man!

I love your videos,keep up the good work.

You have metal shavings inside the filter now. Might get sucked into the carb or engine.

I'm getting this for my mini bike.

Hello Redbird my name is Clayton Miller and I live in Florida I am a huge fan but I have a question for you when installing a 22 mmacuni carburetor to add nitrous oxide do I have to change my pushrods and spring do I need to upgrade to a stage 1 kit Before I do it would it make my motor throw a rod

Have you ever done a 420cc?

I know you aren't responding back to messages right now, prayinh for you guys. Anyways thinking should do a 1lb nitrous bottle that way not refilling as much and figure out what type fittings you could run for different shots for a little more but to last longer and not swap out each time.

You should do a video for a elecric start on the predator 212

Very interesting. Very interesting. Are you not afraid of leaning out the engine?

Can you please do a video on how to set up the shifter/clutch handle? I’m tryin to put a YZ80 engine on a go kart and I’m not sure how to set up the shift linkages or the clutch handle on the steering wheel

another great video !!! keep up the great work.

build a go kart with a 450cc motor from a dirt bike wth the trans also like a CRF 450R

I can't help but notice that the nitrous kit trigger looks just like a co2 bicycle tire inflator, which can be had for under $20. If the nitrous cylinders are interchangeable with the co2 cylinders, that could be a cheap DIY option. Any idea if this could work?

Hi Red Beard! Thanks for making this video as I am building a mini bike with my young son.I want to add a 6 sigma nitrous kit.I am running a Tillotson 212cc hemi with a 24mm mikuni flat slide...the question I have is you said using a pulse pump would be very beneficial to the nitrous..if I run the pulse pump with the output go directly to the carb or should I split it with a "Y" and send some of the fuel to the intake? Thank u so much

So the nitrous is the standard canisters you use in the whipped cream dispensers?

I don't about air cooled engine. But I seen people put nitrous on a bone stock car engine. It scorch the valves and burn cylinders. You think that will do the same to the predator engine?

How duz this work you would think it would just come out of the air filter you shout Drill and tap the carburetor it would work just like a car motor that way just as for a small block or big block it would be a Actual nitrous it through the carburetor and not have time to escape through the air filter you would get more power than just some advice

What size is the jet does it come with and why wouldn't the jet be at the point in which it feeds the engine?

Hey red beard I was wondering about a video on installing nos on the Coleman kt196

0:03 dem eye lashes tho

Wts going on ,where did you get the rim Nd tires from on the go kart

Might better to fit powerjet more fuel when needed adjustable too

So basically, you could put this on any small carbureted engine?

Why dosen't everything get all blurry like on GTA or fast and the Ferocious?

What size jet should i use with my kit? I have a 212 Hemi with stage 1 running a 115 jet. 120 gets a little to rich and choppy. My kit didn't come with a jet.

I need to buy the kit as i need some information to my project so i request you to lv any contact

You should have did a nitrous kit on the street go kart

So for a 125 cc pitbike this application would be to same just put a hole in the filter and adjust the carb so it won't lean out?

Can you use this on stock internals ?

have u ever considered supplementing some propane along with the nitrous on a solenoid valve so ur not runnin too lean?

I HAVE THIS ON MY MINI BIKE

just some kart racing thoughts here. the only time that spray will make a difference is under acceleration! it does zero good to spray already topped out. the engine can only turn X amount of rpm more power isn't going to increase that.

is 20w-50 any good for a mini bike. im not trying to get speed out of it, just long use on the trails. i live in FL so it doesnt get too cold.

hello red Beard, I have a honda clone 4400 generator 7 hp. blew a head gasket, and the spark coil fried. so i picked up a new predator 6.5 hp motor at harbour freight. I disassembled my generator noticing the diffrence in crankshafts the end is tapered with no keyway. can I use my 7hp crank in my new motor? and what mods can I do for a stable smooth engine for my Generator?

My current steering setup is the 3 hole where do you get the adapter to have the 6 hole for the type r steering

Cool kit I need one for are next build

Where can you refill the tanks at? Any pace that refills regular nitrous bottles for drag cars?

“Massive gains”

The nitrous is awesome

Does anywhere sell a Angled intake manifold adaptor that points the assembly back so when the bike falls the air filter and carb dont break on the ground?

Would it work to install this between the carb and the engine block (on the intake manifold), or does it have to be before the carb? Any help would be greatly appreciated.

Can you run a predator 212 stage 1 kit and the nitrious kit at the same time

the 670cc predator comes with a single massive carb for the vtwin cylinder engine I'm contemplating using one of those for my next build but gopowersports has a 390 carb that you can have one for each cylinder and that in turn will help it run better do you think it's possible to run the Nos through the spacer between the cylinder and the carb and whether it would work well or not? Once I have enough saved up I wanna build a minibike from the ground up with the 670cc I love my doodle bug with my modded 212 just 40mph is a lil too slow and not sketchy enough. lol

I’m curious to know why didn’t it get hooked up to the manifold? Being some manifolds have a air connector peace wouldn’t it be hooked up there?

Won't NOS mess up your engine/ shorten the life?

Hi , what kind of rear axel do You guys use for buggies ? Is this that chinese axel ?

Hey man you have the same go kart frame we are building off of can you tell me how you did the rear axle?

I see you have a Jacky Jones shirt on. Are you from north Georgia?

I used your name when buying my stage 1

Sis, I asked if Nitrous Oxyda could be applied to a motorcycle with a small tube size like that and if you buy the name of the tool, what is the button, it's complete as an example whether the motor can be faster thanks, hopefully answered

can you put a full size nitrous system on a gokart

Where can I get the manual clutch?

what size motor do you guys recommend for a maurray explorer it has a 6.5 horse on it and its not enough so i was thinking about a 13 horse honda would it be to much

bad boy

I'm kinda new to the small engine scene, is the performance gain worth the $60 us?

I wanna get the carb for my Cole man mini bike but I live in sugar sand any suggestions?

I bet I couldn't do his for my cbr250r 2011 motorcycle. It's eletronically feulinjected, so i bt if I did the exact same you did, it would fry the MAF SENSOR oR AM i WONG? i WOULD LOVE TO DO THIS TO MY BIKE