Prime ANY Alcohol Stove 10 TIMES Faster for $2.99!

Подписаться 74 тыс.

Просмотров 54 тыс.

50% 1

Get You Own PaleoHikerMD Patches HERE!: www.etsy.com/s... Oh how I love alcohol stoves. I have many, and each is special. That said, some of them have an issue in that they can take a good while to prime, especially in cooler conditions. Stoves which require the alcohol to heat up enough to vaporize can be slow to get going. This can lead to wasting fuel as you wait for the stove to prime. So, how can you prime your stove 10 times faster?
#alcoholstove #stovetesting #spiritburner
Gear Used In This Video:
Prime Lite Primer Pan by Trail Designs: www.traildesig...
Lixada Aluminum Stove: amzn.to/3g1wF3a
Boundless Voyage Titanium Stove: amzn.to/3az14ET
Evernew Titanium Stove: amzn.to/3kPpKhd
Trangia Spirit Burner: amzn.to/2DWt1uo
Make Your Own DIY Stove #1: • BEST and EASIEST DIY A...
Make Your Own DIY Stove #2: • Alcohol Stove Made fro...
Make Your Own DIY Stove #3: • The BEST Alcohol Stove...
Get Your Own PaleoHikerMD PATCH: • PaleoHikerMD Patches F...
**Where I can I provide amazon links to the products that I use. These are affiliate links so if you purchase the product through this link it helps the channel out. While you are there, stay and shop some more! Thanks in advance if you can help us out continuing to make more content.**
Camera Gear I Currently Use:
Camera - Panasonic G7: amzn.to/2SWZJhM
Extra Lens - Olympus 40-150mm: amzn.to/2W18Q2S
Tripod - Bonfoto Carbon Fiber: amzn.to/2SPV5lv
Small Tripod - Joby GorillaPod: amzn.to/2SUlD5f
Lavalier Mic - Rode RodeLink: amzn.to/2ALedKe
Shotgun Mic - Rode VideoMic Pro+: amzn.to/2CoBsKf
Amazon Rechargeable Batteries: amzn.to/2SUjMgJ
IPhone Gimbal: Zhiyun Smooth 4: amzn.to/2ZxfkuG

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 208

@blackboardbloke 3 года назад

The Trangia was the fastest, but you don't need a priming pan to make it faster. After filling the reservoir to the required level for what you're heating, put a few drops in the gutter that's formed between the cap screw thread and the outer skin. Light that first, the flame primes and transfers to the centre.

@neologian1783 Год назад

works like a charm

@carllast5631 3 года назад

The metal base from a Pringles tube looks very similar and works the same. It has a small ridge around to keep the fuel in and if you eat Pringles (like everyone) its basically FREE.

@BoycottChinaa Год назад

No! Costs me plenty when your heart attacks the healthcare system!

@deskmat9874 8 месяцев назад

Exactly the prices for these stove stuff is an absolute scam, sometimes it's cheaply made and you can get a similar result at home

@MatoNupai 4 года назад

Ernie I am the designer of the Mahalo, Topsy Turvy, Ultimate stove and others. I have been singing the praises of a primer tray FOR YEARS. That is the ONLY WAY to go in my Opinion. Saves time, saves fuel, AND HOW I got a pressurized stove to work at -9 degrees at almost 7,000 feet elevation.

@marmac567 3 года назад

It doesnt waste fuel.... Start cooking immediately, dont sit there waiting for jets to fire.

@orraman5427 3 года назад

I totally agree with you, I've never understood why some people sit and wait for the burner to come to a full bloom if they are using a separate pot stand.

@PaulSchortemeyer 4 года назад

I just tested this out with a tuna can lid...worked like a champ!! Thanks for letting us in on this amazing stove trick 😀

@derekmcmaster6123 4 года назад

I just use the top of a tin can that is cut off using a safety (side cut) can opener.....Works great and it is free

@thehawk35 4 года назад

I came here to say this.

@sanborns 4 года назад

Great comment, I looked to buy the product at $2.99, but with shipping I would be charged an additional $9.48. Not a great deal for basically a tin (aluminium) can lid you can make DIY.

@garywhelansr5602 4 года назад

Im using a snuff can metal lid seeing this 👍

@michaelrogers6002 3 года назад

I use the metal bottom from a Pringles can.

@bdmenne 3 года назад

I don’t have that opener, so I slaved a bit and cut a hole in bottom of tuna can and scored it 1/2 inch from the bottom toll free. Saved $11 but took 20 minutes to make.

@eddieallen6401 3 года назад

I say this without a hint of irony. I find these alcohol stove videos endlessly fascinating and strangely soothing. Impressive stuff from the Trangia. I was going to buy the winter attachment but this is much lighter and cheaper. And like others have said I'm sure I can make something similar from a can or jar lid. I've heard of people using a tea light to heat up the stove body but this is a neater solution. Great video my friend. Stay safe and keeping boiling water.

@Red_Proton 4 года назад

I use a tuna can to improve priming in cold temps.

@toooldforgaming 3 года назад

Haw, I just mentioned this in my post, scrolled down and yup there it is. Why pay 2.99 and 10+ for shipping when 25 cents can of tuna can do the same? Hell you can do it with the lid alone.

@shinysidedown9090 4 года назад

I have a trangia. I use a strip of paper wetted with alcohol as a wick in the stove - works good. Also, put your pot on ASAP to conserve heat - the bloom will come faster.

@mihamaker Год назад

is that some kind of insulation material?

@shinysidedown9090 Год назад

Does this pass the "So What?" test.

@toddnewsom8129 4 года назад

Excellent tip! $3.00 Primer Pan, add $9.50 shipping. Hahaha I think I'll try an old mayonnaise lid. :-) Its free.

@MsRotorwings 4 года назад

IKR? Great product but ridiculous shipping costs.

@carterlucian8027 3 года назад

i know im asking the wrong place but does any of you know a trick to log back into an instagram account..? I stupidly forgot my account password. I love any help you can offer me

@spencerhugh9275 3 года назад

@Carter Lucian instablaster =)

@carterlucian8027 3 года назад

@Spencer Hugh thanks so much for your reply. I found the site through google and I'm in the hacking process now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

@carterlucian8027 3 года назад

@Spencer Hugh It did the trick and I now got access to my account again. I'm so happy:D Thank you so much you saved my ass!

@mab0852 4 года назад

I got a similar alumimum tray from the icing lid of grands size cinnamon rolls.

@jonjonword6222 4 года назад

Michael Barber haha! Me too!

@njcranes 4 года назад

Mmmm. Cinnamon rolls....

@telegraph_hill 4 года назад

Unsubscribing because of your annoying clickbaity thumbnails. Sorry. Some of your content was really good.

@PaleoHikerMD 4 года назад

Glad you enjoyed the videos while you were here!

@Stoney_AKA_James 4 года назад

Good idea! Doctor can't read his own handwriting!?! I'm shocked!!! ;-)

@JimRodgers 4 года назад

I've had issues with my Trangia stoves when using them in high mountain areas of the Cascades (above 5000') in cold weather. Takes forever to prime. This product appears to be exactly what I need!

@northernswedenstories1028 3 года назад

Trangia sells a cold weather plate on its website. Back in the day they also used to make a military version of the stove that worked better in cold weather but was much bigger then current trangia stove

@crazysquirrel9425 3 года назад

Ever try a double walled large muffin pan? Not the whole thing but cut off one of the spots you make a muffin in?

@clivedunning4317 2 года назад

Dear Jim Rodgers, can I please ask , two years later, what your experience of using this type of priming pan worked out in your trips to the Cascades was ? TIA.

@Liberty4Ever 2 года назад

For gram weenies, a shiny stainless cupcake liner makes a good priming tray and also reflects heat up to make the stove slightly more efficient. The three little divots on the priming tray prevent heat loss into the ground so it'll greatly reduce priming time and improve stove efficiency and heat output on cold days. The Spiguyver pop can stove primes in a few seconds. Be sure to build the latest version.

@GrumpyGrunt 4 года назад

Pro tip: If you light your alcohol stove with a flame thrower, you don't need to prime it. 🤪 I usually just drip a few drops over the top/side of my Trangia, but that was an interesting test. Thanks, Ernie.

@mrcvry 4 года назад

Interesting how much better the Trangia is. No wunder that they have not changed it in hundred years. Such a simple idea and the knock offs still do not get it right. 🤣

@shinysidedown9090 3 года назад

Free! Light a small strip of paper (receipt) and drop it in the stove. Also put your pot on immediately, waiting for the bloom wastes heat and fuel. But let us remember: you bought the stove because you're not in a hurry.

@allenbishop9154 4 года назад

Easy enough to make that accessory plate from the bottom of a vegetable can about 1/4 inch high, then if you want a couple bumps to raise the stove, just a few taps with a hammer and a drift punch. #Upcycle #DIY

@joelrampersad1359 4 года назад

My capillary groove stove primes in 4 seconds, and boils 2 cups of water in under 5 minutes. Comes with a built in pot stand.

@thexitto 4 года назад

It´s a Fancy Feast Mod by Hiram or a Spiguyver Stove?

@joelrampersad1359 4 года назад

@@thexitto it's the capillary groove stove that Hiram advised should have a pressure release hole at the top. We still miss Hiram.

@Sokol10 2 года назад

@@joelrampersad1359 That model was know as CAS stove, Tombike stove (have a Vimeo video with 3mi+ views with how make one), groove beer can stove. An very easy to make model, just not much fuel efficient, as burn hot and fast.

@bigmac3006 4 года назад

Great vid. My priming tray is made by Cambells Pork amd Beans, works great.

@wowguy3562 Год назад

I stumbled on your channel a few weeks ago and owned zero stoves, now I have 4 and a steampunk eddy on the way. The primer ring looks like an awesome idea I will need to make or buy one. These stove videos are addicting thanks for making them

@carrdoug99 4 года назад

Bottom line. Buy the Trangia.

@carrdoug99 4 года назад

@tyvek05 In reality, unless your just doing little weekender trips (under four days), I don't know why you'd mess with alcohol stoves period.

@markmueller5508 2 года назад

Can’t read my writing? Of course not. You’re a doctor. Thanks for all your videos.

@voo8165 4 года назад

I've got a million of those primer plates. So does everyone with a roll of aluminum foil.

@mako5708 3 года назад

Or just fold some layers of aluminium foil into a small pan shape and put it under the alcohol stove :-D ... saved 2,99 USD :-D

@skipzimmerman 4 года назад

Great priming tray! Too bad shipping is 3 times the price at 10 bucks. Going to try making my own until I can get this via Prime.

@medusaman1 Год назад

small paint can lid.

@davidclarke7367 3 года назад

Love these videos. Not sure of your math though, 2.07 compared to 15 seconds is 8 and a bit times faster, not 15 times faster. Only 60 seconds in a minute😱

@toooldforgaming 3 года назад

I knew when I clicked this video the result basically was going to be "Upside down soup can/pickle/cheese jar lid as a base" and I was not disappointed, I wish more people knew about this by default. That said you only need a few drops around the can lid otherwise like you've shown if you fill the lid fully you get a run away stove combustion. Another better version of this is to just stick the alcohol stove inside a tuna can and light the whole thing with a few drops in the tuna can. Whoosh! That said, you should try out the Lixda Titanium Stove if you're showing people about priming pans, the stove itself has a channel you put some alcohol in after filling to prime the stove quickly.

@robertlarkham2428 4 года назад

$2.99 but $10 shipping. Not for me.

@pedroclaro7822 Год назад

DIY alcohol stoves use a soaked wick on the outside of the stoves, cheap and works great :)

@peterterry7918 4 года назад

Two questions: 1) how much is the fuel savings with putting fuel in the priming pan? 2) does the wick make the stove so efficient that the priming pan is not going to improve the efficiency or does the wicking interfere with the prime Pan's function?

@robertcwillifordii2630 4 года назад

The proper function of the priming tray is achieved when you only use as much fuel as to get the jets bloomed and the tray burns out soon thereafter (having used only a small amount of fuel to get the burner going: as opposed to having a hyped up blazing inferno like Erie had going after the jets were lit). ^----This is where you have attained maximum fuel efficiency. The key is to ONLY use as much is necessary to get a bloom. Wicking materials, in my experience, only absorb heat that is supposed to be transfered to the fuel to be compressed in the inner chamber, delaying the bloom... so I don't use them.

@techguy9023 3 года назад

Seems like the Trangia winter attachment idea. I like my Trangia sometimes, sometimes the Fancee Feast but usually the canister stove is hard to beat for weight and ease of use for longer trips. Use what you like.

@ernieschatz3783 Год назад

.....or just get a Trangia and skip looking for the plate.

@Oldsparkey 4 года назад

Not being picky ...I've always heard it called , Coming to a bloom or just Blooming when you light the fuel inside the unit. As you said on the Trangia at the 4:20 mark. Priming ( using a 2nd heat source ) would be what you did with the accessory unit ( disk ) the stoves sat on. That would be really helpful with the Vargo alcohol stoves , they take forever. I have tried every one of them and always go back to the Trangia and then the Evernew Titanium. Your 1st 2 stoves look like the White Box Stove which is a really good one. I don't get in a hurry when camping and have used a alcohol stove of some sort for about 60 years now. Today I don't care if the stove of choice is slow since I'm slow today. Like you said , each one is special in it's own right , even my D.I.Y. ones. lol.

@bazza1carter 4 года назад

Priming trays are great as your video shows! Perhaps light the primer tray first?

@JS-xs5hq 4 года назад

The spirit cup and thermal cuppling are certainly not new inventions, but that $3.00 accessory plate does the job and would save on ethanol. Thanks for the tip.

@danielkutcher5704 4 года назад

I suggest using ethanol. The vapors from methanol are much more toxic.

@JS-xs5hq 4 года назад

@@danielkutcher5704 Good tip.....thanks. I made the correction above so not to misguide folks.

@timanderson8833 4 года назад

it seems to be critical to get the right amount for priming alcohol, so that the stove doesn't run away, and waste fuel

@alf3553 4 года назад

I’ve made a few cat can stoves and I kept the small scraps of carbon felt (1”x 1.5”). I normally use a FireBox 🔥 Nano & a Trangia burner. If I need to pre heat I use a small piece of carbon felt sitting under the Trangia, add a bit of fuel & light them up. Works great.

@BingWatcher 4 года назад

Ernie, Great 👍video But, 🤔I believe that your MATH is a little but suspect to overstating the best outcomes. For example, the DIY Coors Light stove went from 80 seconds to 10 seconds and you started it was twelve times faster. It's actually about HALF as much at seven times faster🙄⏫❗ 🏁🏁🏁🏁🏁🏁

@danielkutcher5704 4 года назад

Stoves with pot stands do not need priming, nor do Stoves with big holes like a "Supercat", the lightest, fairly durable, single walled aluminum stove that I know of. No pot stand, no primer plate, packs tiny, and pretty simple to use. I cut a piece of disposable aluminum oven liner to the size of my pot, which probably heats the stove by reflecting heat back, and I routinely get quicker boil times than other tests which I have seen. The flat top of the Trangia will take a few drops of alcohol, which will prime it nicely. Note: titanium doesn't hold heat efficiently, so doesn't make the best alcohol stove material. Copper, brass, and aluminum transfer heat very well, but copper is soft and heavy, brass (Trangia, Brasslite) is harder, but heavier than aluminum, which is also cheap (DIY).

@patriot1902 2 года назад

Everyone overlooks the RUCAS stove?

@edwardgilmour9013 4 года назад

Do they prime faster if we put a pot on top? But that obviously works.

@Orlosthedruid 5 месяцев назад

FREE PRIMER TRAY !!!!! Use the lid off your Nacho Cheese Dip !!! It works GREAT !

@rickybritton7212 4 года назад

As always Ernie, Great 👍 little plate, wow what a difference it makes, you always bring practical and simple idea's Thank you. Sincerely Rick from Mo and God bless you and your family

@michaelharris4503 4 года назад

Wondering if it would have primed faster if you had lit the priming tray 2 or 3 seconds before lighting the fuel inside. Fun video. Well done .

@robertcwillifordii2630 4 года назад

The lighting order sequence is inconsequential. The primary factor in speeding up the bloom time is that the fuel in the inner chamber (to be warmed & compressed for burning from the jet holes) be heated from both the inside and outside walls of the burner simultaneously.

@jarikinnunen1718 3 года назад

Other trick is warm it up by body heat and start with small amount of fuel. When it start, put fire off and add fuel. Gas canister need primer in winter.

@victorvasquez2788 4 года назад

looks dangerous!

@barrybrum 3 года назад

Only if you live in California, if so it causes cancer.

@FranklinHicks-qs4gs 7 месяцев назад

THe primer is only 3 bucks, great!! But they want 10 bucks to ship something that weighs less than a fart. ABSOLUTELY NOT

@LongStraightLines 4 года назад

I have all of these stoves and usually go back to the cat can.. near instant priming and concentrated heat. Used in a Sterno Inferno it's a beast!

@titanpreparedness 4 года назад

Well thats interesting. It looks a bit dangerous but as long as it gets your water boiling faster right?

@markraciborski4289 7 месяцев назад

I got a Trangia preheater spirit burner. It has 4 spider feet that clamp to the sides of the stove. It clips to the bottom of the stove, you push it up to the seam bottom, to use, pull it down, the feet, click into that ring around most tangeria like stoves. Under the stove, you have a pad you add fuel to, lightning it, to warm up the stove. You don't need to preheat. Just don't pull it down into place. Down it can be used as a stand to keep the stove bottom off cold ground, a 🥶 rock. Well, $10 is pricey compared to the stove price, and $2.99?

@alal792 3 года назад

i get it that these things are small, so fumes are also going to be pretty negligible..yet aluminum throws off toxic fumes when heated...also pretty much the WORST material you could cook any food in except for maybe a microwave (which is super toxic for OTHER reasons) , yet we all know how little knowledge people seem to have about either these days, and how many of these things are sold AND being used...honestly for a couple more cents just use a STEEL version, like why would you degrade your titanium unit with a piece of trash aluminum priming pan?

@tomlovesdiy 2 года назад

Cut the bottom off a small can with a diameter about 5/8 to 3/4 inch bigger than the stove/ inch. It should be about 3/8 inch tall. Priming pan for free.

@johnburgin7478 4 года назад

Essentially a preheater . Pretty cool . Thanks

@richardwright6796 Год назад

Once again fantastic video,I do believe I'll be ordering one soon. Here in my part of Texas we've been in a burn ban for awhile now. It will sure make a difference. Thanks again!!!😊😊😊😊

@tomlovesdiy 2 года назад

Bottom of a small can about 1/2 inch diameter larger than the stove also can work. Cut the can to about 3/8". Cost-free.

@SovietGrazz 2 года назад

If the objective is to heat the fuel quicker (agreed) then wouldn't a simple perforated pipe, or T-shaped piece of thin copper (or DIY soda can material) be sufficient? i.e. sits in the bottom of the stove, and tall enough to be licked by the flames, which will transmit the heat back to the fuel? ... It might not be as quick as the tray, but also it doesn't deal with the frankly stupid idea of having a shallow tray full of burning fuel ....

@briankelly5731 9 месяцев назад

I'm a little confused. If someone is deciding on a backpacking stove, and they are concerned about 1 stove taking 15 sec and another taking 60 sec, is your enjoyment of the outdoors make or break on 45 sec?

@allendevans Год назад

I use a half-gallon V8 juice can lid. Our can opener cuts the seem, not the lid. The result? The lid comes off easily, w/ NO sharp edges.

@The_Bearded_Lady 3 года назад

I like my trangia pre-heater. I normally only use it when it is cold out. But I can see how this plate has some advantages. First $3 versus $13 and more importantly it fits multiple styles of stoves where the trangia is pretty tight and made specifically for the trangia. It might fit others, I've only used it with my trangia and a little one I made myself. There is also a few priming plates and pot stands in one, I don't think I have one but I can see how those might be easier since it is multi function. Looks like they are around $20 though on a fast search. Anyway, I appreciate you doing all these timing videos. I can't tell you how many I've watched and never done myself lol. Appreciate it ;)

@zoltannagy2920 3 месяца назад

Outstanding information Ernie, Thank You So much Sir !

@oinc7320 2 года назад

Some burners seem to have more major flare up, then settled down, others just no drama blooming? Was this burner design or just luck? If you repeat it, each burner might change?

@wmbomb1079 Год назад

Dr. Ernie, a heads up, with my experience with this pre heating pan there is no need to light the stove itself at all simply light the Prime-Lite Primer Pan and it will light the stove automatically which I'm sure will save fuel 'big picture' along the way, try it.

@jerrycollins4893 7 месяцев назад

The Boundless Voyage has a priming wick. You put alcohol on it and light it. This heats up the stove and primes it.

@Kevin-px3gk Год назад

Hello Paleo chiming in, surely has it's place form intertaly self prim wire meash perhaps inexpensive goodes locly sourced

@bigmac3006 4 года назад

I've been using this method for a while now. Works great!

@bobkelly2447 2 года назад

interesting.... I just use a jar lid to set the stove on and dribble some alcohol in it and yes it helps allot ! even on the simplest of stoves ! I made a soup can stove that had a ring of 3/8" holes around the base of the can about 1 1/4" from the base and another ring of holes near the top rim.... just pour in the alcohol into the can and light it ! it's the simplest I've seen yet and works very very good and you can set the pot right on it ! I have the top of a 8" cookie tin I use for the pre heater, but a large jar lid will do the trick as well.

@Asdf-789 3 месяца назад

Bottom of a soda can makes a perfect primer pan. Costs nothing if you repurpose a can from a bin. Works as well.

@jackvoss175 3 года назад

When you have data of several data points, it would be very useful to us if you would fill out a data sheet. Thanks. Courtesy of Half Vast Flying

@korling99 4 года назад

Do you know what happened to Hiram? Did he just stop making videos?

@SnowyAspenHills 4 года назад

Lots of people have tried to find out, some have tried to make contact but to no avail.

@rld1278 4 года назад

He's on Facebook

@SnowyAspenHills 4 года назад

@@rld1278 True but no stove reviews any more, it just stopped.

@macplus3339 Год назад

Wrap some aluminum foil around the bottom of the stove. Pull it away slightly or remove it entirely. put a few drops of fuel into it or better yet, use it to catch any spillage from filling the stove. Place the stove in it and light.

@snomanfpv306 Год назад

My lunch hours are now centered around learning everything there is to know about alcohol stoves.😁

@the_orange_shepherd6938 6 месяцев назад

How does the Trangia winter attachment help the Trangia?

@aaronvanhoucke2065 2 года назад

In made a side Burner that with chs en only used two can's. It primes in max 10sec.

@natedog45678 4 года назад

What also works is a lid of a large can

@adk9215 3 года назад

Shipping for this item is 2x the price. Really???

@samuelfox8126 7 месяцев назад

But are you burning more fuel in the priming pan than it would otherwise burn to self prime?

@calvinmonroe2408 3 года назад

Ive decided that these stoves are wholely inadequate and not worth having/using just to save on weight

@wayneberry8703 Год назад

That is fantastic, Ernie, well done 👍🏼

@MrDanAng1 4 года назад

This is a really interesting video. I wonder when the extra drops of alcohol on the plate is more or less than the full priming procedure? I'm pretty sure the extra drops on the plate is more than it take for the Trangia to prime and the extra drops is way less on the stove that primed in over two minutes, but I wonder where the point is here? My stove prime in about 20-25 seconds, so I GUESS it doesn't make sense to prime it faster, but I don't KNOW.

@robertcwillifordii2630 4 года назад

Honestly, that curve depends on the ambient temperature. That's why documenting the ambient temp is important, Ala Hiram Cook. The lower the ambient temp, the longer it will take for the jets to bloom (enter the priming tray to save your fuel efficiency day). The other main factor is what the stove/burner is made from. Steel is far inferior at transferring heat through the dense metal walls for compression to take place than aluminum walled burners (thinner is better). Cat Can and Capillary Hoop Stoves are the only ones that do not need a primer tray. All others' fuel efficiency benefit wildly from using a primer tray (and couple that with a windscreen, and your in business).

@slickydicky 4 года назад

Straight up though you were flipping us off in the thumbnail

@northwind9505 4 года назад

You just put a bunch of old stove back in service! Thanks.

@jheighten7568 3 года назад

What is the difference between red camp and trangia besides brand?

@keekwai2 Год назад

Just cut the bottom off a tin can from the trashbin and have one for free.

@airinbone 7 месяцев назад

Just make your own. I did.

@keithcronk7980 4 года назад

HAY DOC DO YOU HAVE THIS STOVE BY [ SIMPLE THEORY PACK STOVE ) IF YOU DO WOULD YOU DO A REVIEW ON IT SIR THANK YOU. HAVE A GREAT DAY DOC!!!!!!!

@ccmogs5757 4 года назад

Sure he"s done a review of this @ 7 months ago , check his video backlog :)

@keithcronk7980 4 года назад

@@ccmogs5757 OLIE DOKIE THANK YOU

@QuantumPyrite_88.9 Год назад

Geeez...bring your mommy.

@allanpeterson2364 Год назад

Great video that shows how to get an extra minute of boil/cook time. I use a side cutting can opener and make my priming plates out of soup or tuna can tops/bottoms! JMHO

@johnhoward7298 3 года назад

MAN !!! You could set off the NEIGHBORS fire alarms !!!

@PaleoHikerMD 3 года назад

I don't have neighbors :)

@johnhoward7298 3 года назад

@@PaleoHikerMD Lucky U ! ( 2 edge sword )

@lawrencefieselman3803 3 года назад

I thought "$2.99 for a can lid? No way." I see Paul used a tuna can lid. I used a Bush's Baked Beans lid. Works perfectly. I love your videos, Ernie, but this one missed the boat.

3 года назад

Nice... Thank you

@buntoskiffler 4 года назад

good morning, thx for posting. Just a big CON with that accidental spillage on the table possibility, but yeah its proven to work. Idk. -b

@bobkrohn8053 2 года назад

Coincidentally I just discovered this idea myself. I thought I was making these home brew stoves wrong because they took so long the start working. Yeah, I just used a can lid. Also one of those “disposable” mini aluminum pie tins. Why nobody came up with this years ago?? The old Primus gasoline stoves had a small cup built onto the base of the stove for this exact purpose. WTF?

@opopopop6286 3 года назад

Also, for expensive stoves like the EverNew do you believe it could possibly damage the stove in some way...after all these things are designed pretty specific. For those other cheap stoves, who really cares...except for the fact of the ones made from aluminum which WILL throw off toxic fumes of coarse. Yet I am thinking that maybe it is possible to damage the wicking material some if you have a direct flame underneath it...in any event you showed how fast the evernew primed (I just got mine in the mail less than an hour ago) so to me I would just wait the extra few seconds. BTW the Evernew pairs AMAZINGLY with the Lixada Titanium wood / alcohol burning, they fit like and in glove!

@emmanueljesusmacalalag1932 4 года назад

i am on ther side of a primitive planet, however, u amuse me by ur sweet tongue in explaining wat u do best,MAGNIFICENT!!! KEEP IF UP GUY, GODBLRSS.

@kenneth4992 3 года назад

With the Trangia, have you tried placing a few drops of alcohol on the lip right below the jets? But like you said it lights up fast already. GOD Bless you and your family

@Hectorszenshopedc Год назад

Well done brother

@billfricker4368 3 года назад

Thanks for your videos. My solostove 🔥 was always yellow flame. Got an evernew placed inside solo elite boils 8 oz in < 3 min. Thank you!. Will drilling solostove burner holes bigger get me a blue flame?

@macdaddykwm1 4 года назад

The question is, did you actually use less fuel when considering the amount used for the prime?

@robertcwillifordii2630 4 года назад

His inexperience is showing here..... You're ONLY supposed to use as much fuel as is needed to get to a bloom and have the primer run out soon thereafter for maximum fuel efficiency. Otherwise, you are correct, it is a waste of fuel.

@hardtruth2039 2 года назад

The evernew titanium is my favorite commercial alcohol burner/stove. Otherwise I like the larger version Vienna sausage can and tomato paste can fancy feast style alcohol stove.