PRO CNC Build Series: Mach3 Setup and Initial Shakedown Run

Подписаться 27 тыс.

Просмотров 90 тыс.

50% 1

Avid CNC has transitioned to using Mach4 as our primary recommended control software.
Mach4 Install and Configuration: • Pro Tip: How to Instal...
Mach4 RU-vid Playlist: • Pro-Tip: Featuring Mac...
Mach4 Setup & User Guide: www.avidcnc.com/support/instr...
If you have any questions about upgrading to Mach4 please contact our support team at Support@AvidCNC.com.
---------
Please note: This companion video to our CNC Software Setup Guide includes steps for installing the Ethernet Smoothstepper plugin and our Auto Z Touch Plate script. These steps are now performed automatically for you by our latest Mach3 installer. This guide remains a very useful walkthrough of the software setup process, but these steps can now be skipped provided you use our Mach3 installer (included in the CNC Software Setup Guide linked to below).
Continuing our PRO CNC Build Series as we install & configure the CNC control software on our control PC and take our new CNC machine for its first run, jogging, initial homing, and configuring the machine for use with the Auto Z Touch Plate.
Software Setup Links Covered:
www.cncrouterparts.com/cnc-sof...
www.cncrouterparts.com/auto-z-...
Products Discussed:
•PRO Series PRO4848 - www.cncrouterparts.com/pro4848...
•NEMA 34 (23 Similar) Plug-and-Play Electronics - www.cncrouterparts.com/4-axis-...
• 2.2kW Plug-and-Play Spindle & VFD - www.cncrouterparts.com/22-kw-p...
•Auto Z Touch Plate - www.cncrouterparts.com/auto-z-...

Наука

Опубликовано:

1 фев 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@yohkodevilhunter8292 7 лет назад

Awesome. Just in time for my build. Thanks Nathan!!

@treescolorswizards 3 года назад

Thank you for mentioning to make sure you have your motors engaged. I struggled with this and thought it was everything but that, turns out I'm just an idiot and it started to move as soon as I engaged them. I feel like most of the other tutorials glossed over this very important step. Again, I'm an idiot and both Avid, and Mach information is very through and helpful. It's appreciated!

@ericclinedinst 7 лет назад

Nathan these are great videos! Keep them coming! thanks again

@MajorTendonitis 7 лет назад

You guys make great videos . I'll be assembling your 4/8 pro series someday

@David_Best 5 лет назад

I’m glad I watched this. This software setup and config process is positively 198O’s complex and Byzantine. I now see why Tormach developed Path Pilot. I have zero desire to use Windows or Mach3 after watching this. Thanks for this video.

@Z-add 5 лет назад

Even though you guys don't sell it with servos it would still be nice to see a video on how to use clearpath servos with this kit.

@AnthonyWebb7 7 лет назад

I saw mention of plasma at 10:30 how is that project coming along?

@alicante1989 7 лет назад

pls can I use same limit switch with breakout board 5v

@pavelpershin 3 года назад

Nice

@weldon2848 3 года назад

Nice CNC router , im making copy of it .. :)

@trojanman22 4 года назад

Any plans to update this video for Mach4???

@jackflash6377 6 лет назад

Has anyone used Path Pilot on one of your machines?

@AvidCNC 6 лет назад

Hi Jack, Not that I'm aware of, though some have used "mainstream builds" of LinuxCNC. It's not something we natively support, though for advanced DIY folks, most things are possible! -Nathan

@paulbergman8228 3 года назад

Is there a slow version of these instructions...like about as I can type this line? 😕

@rchavez5056 3 года назад

Play the video in slow motion.

@cavokdotcom 7 лет назад

Oop! Ctrl-V is paste in Windows, is it actually Ctrl-P in Mach3, or was that misstated?

@AvidCNC 7 лет назад

It should be Ctrl-v @ 12:37 - Sounds like a verbal slip on my part. Thanks for catching that! -Nathan

@cavokdotcom 7 лет назад

Awesome, thanks for the clarification! I figured as much but, then, Mach 3 has some idiosyncrasies that have left me scratching my head.. Great video too, thanks for all the detailed information about your systems!

@squidskunk 3 года назад

has avid created an updated version of this video..? a video that includes Mack4 and windows 10 pro 2021..? for new avid cnc owners...

@AvidCNC 3 года назад

This is currently under production and will be done very soon. The written instructions are available for a step by step guide on this process. If you need any assistance during this process please feel free to reach out to the support team! www.avidcnc.com/support/instructions/software/mach4/

@squidskunk 3 года назад

@@AvidCNC ...may i suggest an update to all the videos...thank you.

@rchavez5056 3 года назад

Hello Avid CNC. I am going to set up my pro 48x48 using Mach3. Is this video still valid a far as the steps needed to set up my machine with mach3? Are all the files that are needed still available on your website. I know the latest and greatest is Mach4 butI have a license for Mach3 and would like to continue using it if possible. Please let me know. Thanks in advance.

@AvidCNC 3 года назад

Hello, yes we also have our Mach3 documentation available on our support site. We encourage you to upgrade to Mach4 when you have the chance. If you have any questions about either of these processes please don't hesitate to reach out to our support team by emailing Support@AvidCNC.com

@AvidCNC 3 года назад

Here is the archived Mach3 Instructions. www.avidcnc.com/support/instructions/archived/software/softwareSetup/

@rchavez5056 3 года назад

@@AvidCNC Thanks, It's really appreciated.

@TheFeFactor 7 лет назад

Is there a reason you running MACH3 and not MACH4?

@spencerdyer4372 6 лет назад

Here's Howww Easyyy It Is to Follow The DIY Smart Saw Program > t.co/O5Xf7QNRGt?k1D4zJO-L2s

@humbertomedina4231 4 года назад

@@spencerdyer4372 can you repost this please. I get a error. Or if it's a you tube video what's the name of it. Thanks

@Z-add 6 лет назад

questions in the comment section are going unanswered. This reflectly badly on the company's reputation.

@AvidCNC 6 лет назад

Thanks for your feedback, are there any unanswered questions of interest to you specifically? Let us know here or feel free to contact our support team at support@cncrouterparts.com. -Nathan

@GregPascal 7 лет назад

WAY too fast up front. I couldn't follow much. Seeing a mouse click SOMEWHERE 8 times in 4 seconds is NOT very helpful. I'm in the market, but not if this is a sample of your learning stuff.

@AvidCNC 7 лет назад

Hi Greg - If you prefer written assembly and setup instructions, feel free to review those at www.cncrouterparts.com/instructions or contact us directly with any questions. Thanks! -Nathan

@GregPascal 7 лет назад

Thanks!

@GregPascal 7 лет назад

Hey! Question. What is the difference between the Standard and Pro products?

@GregPascal 7 лет назад

Also, thanks, above!