Project 4mil part 7 | FIRST ASSEMBLY VIDEO!!!

Подписаться 235 тыс.

Просмотров 65 тыс.

50% 1

Assembling the bottom and top end on a 421cc Banshee Stroker!
Project 4mil part 7 | FIRST ASSEMBLY VIDEO!!!
It's finally here, the first assembly video of the 4mil Banshee! In this video I put the bottom end together, go over ring gap and then install the pistons and cylinders.
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Want to reach me? Email me at..
michaelsabo350@gmail.com
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / michaelsabo350
Miscellany Art
Website: www.miscellanyart.com
Instagram: miscellany_art
DBC Racing
Website: www.dbcracing.com
Instagram: dbc_racing
I own the license to use any and all music in this video.
Other Music is as follows...
Track 1 (at end)
Music provided by Frank Herrlinger.
Track - Metallic Bombs

Авто/Мото

Опубликовано:

26 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@stevetremblay9323 6 месяцев назад

Its the best video "how to built banshee engine" thank you very mutch

@trailblogger 5 лет назад

keep up the great work. can't wait to hear that thing rip!

@1XMuleX1 5 лет назад

Hopefully you guys can collab one of these days

@julioocampo523 5 лет назад

TheMindOfTyler can’t wait to see it all put together. #greatjob. I do have a question I just bought a banshee and that thing rips, it is my second banshee so far. But this one does not have reed valves, I just noticed when installing twist throttle last week. I been riding it for about 1 year now, I’m thinking about 400 ridding miles. But gain, don’t know if I should buy some vfoce and be done with it or just ride it like that. Any suggestions or advice will be much appreciated. Shoutout out from Seattle WA

@JeffreyChepo 2 года назад

Greatness bro pure greatness… your a hell of a guy….

@bradmerrill7134 Год назад

Thank you Michael. I'm so impressed with your videos. You have inspired me to build a banshee motor. I'm grateful for you and your videos!

@dansavka7648 2 года назад

Threading those on to nut right over the cylinders to remove any shearing great idea cuz the cylinders will act like a furnace to burn those metal shards

@KensGarage1 2 года назад

A little late to the party here but very nice video. I'm assembling another RZ350 engine so nice to see how others do it. Thanks.

@hennessyremy4970 3 года назад

Life goals. I wanted a banshee. I did that. And now. I wanna get another one and make that a 4mil baby.

@keithpruett7971 5 лет назад

Cant wait to hear it run

@highlinebyjmac4733 5 лет назад

Michael very good video one of your best yet keep up the good work. I’m sure I’ll becoming to this video every time I do a rebuild.

@Sleeper_Banshee 3 года назад

Hey text me I lost your number

@suzivs1 3 года назад

Super Nice

@thebansheerider9244 5 лет назад

Hello from belgium 🇧🇪 like the vids man keep it up 👌🏼

@MichaelSabo 5 лет назад

Thank you!

@frankhilkowskijr2557 2 года назад

Great video

@LiveFreeOrRIP 5 лет назад

amazing. This is going to run awesome!!!

@nelsonkarrer3143 5 лет назад

Build coming along good

@DerredmaxTRIAX 2 года назад

Your videos are so good. Your effort shows bro, bar none!!

@MichaelSabo 2 года назад

Thank you again man!

@bricehale6593 5 лет назад

You need to open up a shop man good work pays

@MichaelSabo 5 лет назад

Thank you man that's one hell of a compliment.

@xaviergrindle7835 Год назад

Would you work on other people banshee?

@xaviergrindle7835 Год назад

@@MichaelSabo?

@deeaikens9843 5 лет назад

Wow this is as simple as a sbc 350. I rebuilt my rm125 engine that thing was a pain in the ass

@1991tommygun 5 лет назад

Deadly video thanks

@andrewraymond6223 2 года назад

Man, I love the quality of your videos

@connersnow298 3 года назад

Awesome vid and bike

@stevencuberosoto1756 5 лет назад

Damn man... good looking project ✌

@yansheeold_b9147 5 лет назад

yeeeeeah nice job from paris

@arixp9092 5 лет назад

The most exciting thing is getting something new for your fourwheeler lol

@MichaelSabo 5 лет назад

So true!

@ericfilicky4936 5 лет назад

On 421 banshee I cannot wait to see this thing in action

@modifiedhustle4312 3 года назад

Bro. I could watch this stuff Monday thru Saturday..... Sunday Is for football 😁

@jspecricer2734 5 лет назад

Nice work

@DjChrisChip 5 лет назад

Great content!!

@DawidSlodyczka 5 лет назад

Love these assembly's videos! Nobody out there do these kind of videos so keep it up!

@andrewflores2596 5 лет назад

Mike good show i did a budget build on a banshee as well i learned alot from your vids thank u

@savagesquad7088 5 лет назад

In process of doin same nice job.🤙clean ass work bro hell yea.

@rossettisgarage9929 5 лет назад

Cool video 👌

@perryturpin766 5 лет назад

THIS IS SO BADASS!!!

@TheDirtbikeKid 5 лет назад

Heck yeah!!! 🤘🏻

@perryturpin766 5 лет назад

TheDirtbikeKid SUP G

@javdielsanchezvelez6189 5 лет назад

Good video

@AnDrEw122100 4 года назад

Awesome job , watching the trx 250 build but went back an found this . Easy way to install pistons is to actually put the piston inside the cylinder slightly and install it on the rod that way . Obviously you know what you’re doing but just passing on little tricks that were shown to me ! I guess it doesn’t really matter when you have the motor on a bench but doing Mx bikes without taking it out it really helps !

@JonathanRodriguez-vy8ig 5 лет назад

Keep the videos up. I got rid of my banshee when I was nearly done... but I'm having another roller sent to me I'm thinking about going 4mill now

@sambogober3197 5 лет назад

Doin an awesome job buddy. Keep up tha great work. & ur doin really good at showing how to do this motor build. Keep up tha great content. & thanks

@mxrider2strokebraaap54 5 лет назад

Awesome vid!👌

@youngphl1 5 лет назад

Great video bro!!

@larrydemuth623 11 месяцев назад

Bansheeeeeeee

@bdogjr7779 5 лет назад

Awesome Mike《☆》Good info Bro :*: The cool head will be kool as well ☻

@StupidFastJohn 5 лет назад

Great work! Lots of explanation and detail i love it. Also i liked the trick of adding gasket maker to the edge of the crank bearing seals, i have always done the edges by the case halves but never the inner races so ill do that next time. Also i purchased a shirt mic when i seen you use yours for the first time awhile back, i like how it comes out in the video so i asked for one for xmas and santa brought it. Excited to try that out along with my new gopro7. Cant wait to see her rip! 85hp with ease brother!

@morrow49 5 лет назад

Oh yeahhhhh

@rodrigosanz5577 5 лет назад

Yeeeeeah!

@salinasracing8314 5 лет назад

Lets goooo

@ruudjantheuws3948 4 года назад

Hi From Holland, Great video's! I always use some grease instead of oil on the wrist pin as it is a bearing just when its new, as i was thinking during the heat up it runs in smoothly whit the engine's milage, not sure if it makes any difference though. But i never had a case where parts of writs pin needles were cause of the crash so i can't tell either. keep up the nice work!(video's).

@goodsonjarrett 5 лет назад

I just started watching your videos and they are all vary good. I'm am getting ready to buy my first banshee for 2k. I guess it's a mild build 362cc with singal stage 4 carb anyways I'm going to build it for the duens/trail kinda like yours. If you don't mind I would like to msg you about my build later down the road.

@blackhat14ts46 5 лет назад

bad ass video bro good job

@MichaelSabo 5 лет назад

Thanks man!

@spoolin610 5 лет назад

Love the videos, keep up the good work. Also check out "Crowfoot" wrenches for torquing the front cylinder nuts.

@hunterhuydggv8920 4 года назад

me and my friend went to driveline and his shop is sick

@OperatorASF 5 лет назад

Lol I know you went and mocked the rest of it up after the video just to see what it would look like 😂 I did it with my engine too lol. Looks great so far bro 👌

@MichaelSabo 5 лет назад

Lmao the cool head and reeds were definitely in there 5 seconds later 🤣

@OperatorASF 5 лет назад

@@MichaelSabo I knew it!! 😂

@skylerhealyvlogs9642 5 лет назад

Just a heads up, I highly suggest not only putting two stroke oil on the cylinder, but the piston as well. But other than that great video dude

@robincheeney8559 Год назад

Love your videos, have you ever considerd dropping a RD-500 V4 IN YOUR BANCHEE ?? PEACE...

@tattooking404 5 лет назад

I come for the music

@MichaelSabo 5 лет назад

😂

@michealearly534 3 года назад

Great content Mike question What size bore if you do have the Cylinders bored?

@stonebiacco9279 5 лет назад

Ya-ma-bond

@robertsproston1534 5 лет назад

God I can watch this all day... this is as satisfying to me as those slime videos are to my girlfriend on Instagram. 🤦🏼‍♀️

@MichaelSabo 5 лет назад

Hahaha thanks so much man!

@estevanramirez9815 5 лет назад

@Robert Sproston Did i just wrote this ? 😂😂

@alexarce8870 3 года назад

How do you torque the other nuts of the block,the bottom nuts.?

@gatlinggunlover 5 лет назад

Be careful running benol. It won't protect the internals from rust and corrosion. So if the bike sits for a while, it's not the best oil to use. I switched from benol to r50, just for the corrosion protection.

@MichaelSabo 5 лет назад

Good tip; I didn't know R50 had more rust/corrosion protection; thank you!

@gatlinggunlover 5 лет назад

You're welcome! The guy me and my dad bought our banshees from ran benol. It's great oil if you are drag racing, but it gets waxy and doesn't protect the internals. I talked to klotz directly about it. If you run benol you will have to fog the motor if it's going to be sitting. But in PA, the weather is always all over the place, so it's hard to say how long the bike will be sitting. How far are you from Marienville PA? The trails here are awesome.

@mustangrank78 5 лет назад

Redline is the best 2stroke oil on the market i run it in my 4mil

@Sleeper_Banshee 5 лет назад

I’ve heard that benol does protect, it’s the super tech that doesn’t protect from rust.

@gatlinggunlover 5 лет назад

Supertechniplate is 20% benol and 80% synthetic.

@yourneck2 5 лет назад

Yo 4mill’s eat chains for breakfast no more o-ring chains, look into sidewinder chains You can even have them custom build you a tinsel strength you want. What kind of riding will you do with this, trail= Paul turner pipes, dune= Trinity pipes

@kdcustoms1272 5 лет назад

motion pro makes a box wrench that fits 12 and 14 mm nuts with a hole in the middle for a 3/8" torque wrench.

@kdcustoms1272 5 лет назад

www.motionpro.com/product/08-0134 I'm not sure if it will work for a banshee... but guessing torque on cylinder base nuts is unacceptable.

@kdcustoms1272 5 лет назад

after reading a thread about installing banshee cylinders, I'm about 95% sure that wrench will fit ( if you can get a socket on it, it should fit no problem) I read where one guy said just torque the head bolt's down with a torque wrench and then just try to put the same pressure on the base bolts with a wrench, not many 12 mm wrenches are the same length as a 3/8" torque wrench, and these guy's wonder why their bikes blow up every 20 hours...

@kevinbeaupre8925 5 лет назад

I havnt dont it but what about the shift star mod. Worth it or not?

@187Apollo 5 лет назад

MIKE I HIGHLY RECOMMEND PICKING UP THIS KIT!!!! it would be a shame to dump all that money into that motor and not put this in. =)

@187Apollo 5 лет назад

you're shifts will be like butter, and with pancake bearing you won't weld the ball. you need this with a 4mill it gets overlooked ALOT.

@ramonperez3689 Год назад

Do you ever put your plugs in your cylinder for the coolant

@robertosandoval9305 3 года назад

What will happen if you dont align the pins to the case you sayed you would be in trouble but what would it do?

@masorcas1000 5 лет назад

Any plans on a utv build? Maybe a yamaha yxz

@jackevans7320 2 года назад

Hi was just wondering what rebuild kit you used as looking at the 373cc kits and crank looks same and your use if the same piston was just wondering if it’s the same kit and if it’s any good

@brucemunro3342 4 года назад

Is your asassin cylinders low port serval or high port? Would you recommend them

@dill5500 5 лет назад

Has anyone ever told you about the 4 holes on the bottom side of the motor that can cause a air leak

@dill5500 5 лет назад

Also liked how it was all in one video not a bunch and way more clear then south Texas bansher he makes great videos also tho

@MichaelSabo 5 лет назад

No, what holes are you talking about? And dude I appreciate that so much and take that as a huge compliment. Kevin from South Texas Banshee is the man and as far as knowledge he is way ahead of me; I learn so much from him.

@dill5500 5 лет назад

@@MichaelSabo There on the bottom side of the case I'll send you a pic on Instagram in a bit just fillem with silacone or jb weld

@LamzLamz714 4 года назад

So a banshee motor can be a 4mil with a stock crank? Correct me if I'm wrong but I thought 4mil would be the 58mm from stock 4mm more than stock?

@erikb5658 5 лет назад

What are the copper colored gaskets for ? Thx

@DprStunt_Garage 5 лет назад

ALWAYS ALWAYS ALWAYS use a torque wrench when assembling an engine, you should know by now how important that is! when you used an impact gun on that cam stopper plate i just wanted to curl up into a lil ball and go hide in a corner...

@skipgrows1622 4 года назад

Bro I got the same setup from driveline. Porting is different. Nonetheless though where was your wrist pin bearings when you got your crank? Were they already bread tied to the rods or where they in the bok?

@MichaelSabo 4 года назад

It's been a while but I think the wrist pin bearings were in the rod with twist ties holding them.

@skipgrows1622 4 года назад

@@MichaelSabo thanks. I got it sorted out with driveline. Solid company thanks man.

@nathanielnieves1008 9 месяцев назад

Is that stock transmission for 421 build just wondering

@DavidJohnson-ri2on 5 лет назад

What gasket kit did you use? Where did you get it?

@V8.383 5 лет назад

Suzuki 4 laif😂😂😂😂💓🌹

@salvadorhuerta6564 5 лет назад

What kind of crank did you use?

@MichaelSabo 5 лет назад

Driveline performance 115mm welded crank with 10 ball bearing.

@nicopalumbo5445 5 лет назад

Where did you get those carbs

@dansavka7648 2 года назад

I like how everything is clean.. Must be nice having enough money to burn like this guy.. Unemployed and all day to burn money..

@JonnyDisilva-z06 5 лет назад

First like

@mustangrank78 5 лет назад

What size cylinder heads 68?

@givennameidk4515 5 лет назад

25:15 how did you take the nuts off the studs?.

@MichaelSabo 5 лет назад

Same way they go on; two wrenches.

@christopherwalts9378 2 года назад

I would use hondabond or yamabond it works way better than that rubber junk

@travisarmstrong694 5 лет назад

First

@buckeyebanshee 5 лет назад

Not painting it? Should’ve polished then cylinders man!

@RCMAN23 5 лет назад

The most annoying thing ever is the front nuts on banshee cylinders. At least when its in the bike

@MichaelSabo 5 лет назад

These assassin cylinders must have a little more area because my 13mm wrench fit in no problem. I know what you're talking about with stock cylinders and I was dreading that with these but they were easy.

@RCMAN23 5 лет назад

Michael Sabo wow. Thats cools.

@christopherwalts9378 2 года назад

Yeah you should not do that cuz that could make it leak that's what the seals are for it's not supposed to have any gasket maker in there

@prieto3500 5 лет назад

Hello all very well but the snag is not the correta for ezo this is the right correta friend the other very biem.

@roguepowersports3576 5 лет назад

Son of a bitch....the other video I was like sweet I got to get me a Yamaha hat that came with the case now I'm like fuck I need that shirt now too. My first bike was a old yz 80 I got for my 7th birthday 32 years ago. I've been a diehard Yamaha guy since then. Have owned at least 20 different Yamaha dirtbikes and quads since then. Dont get me wrong I wouldn't and haven't turned down killer deals on other bikes but if I'm in the market for something your damn straight I'm buying a Yamaha. At least for dirt..........street is a different story. Harley Davidson ftw