No video :(

Pros & cons of vtec lockers on a Daily driver. (0-134 pull video)

Подписаться 51 тыс.

Просмотров 73 тыс.

50% 1

In this video i go over the pros and cons of locking vtec in full time. I also do a 0-134 mph pull video and go over some ways to combat the ill effects that locking vtec can cause.
Link to the locking vtec
• How to run a Vtec cam ...
Link to magnetic drain pan bolt
rover.ebay.com/...
Here is a link to SI RICKO
/ @siricko
Honda bays Instagram
/ _hondabays_
Honda Bays Facebook page
www.facebook.c...
Here is a link to Michael (MY TUNER) he does remote tunes
here is is facebook SERIOUS MESSAGES ONLY
/ asian.mike620
He only tunes Hondata s300, Neptune,Demon and a few others
HE DON'T DO CHIPPED ECU WITH THE EPROM CHIPS DUE TO UNRELIABILITY
If you wanna donate to the build here is a link ANYTHING HELPS!
THIS VIDEO WOULDN'T HAVE BEEN POSSIBLE WITHOUT DONATIONS!!
paypal.me/moore...
Wanna send fan mail? Here is my info!
James Moore
P.o box 821
copperas cove, texas 76522
DON'T FORGET TO HIT LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!!

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 257

@TexasHondaChannel 4 года назад

SOMETHING I FAILED TO MENTION!! I forgot to say that if you have flat top pistons or high dome pistons you will need to clay the pistons to check for piston to valve clearances. Stock y7/y8 or z6 pistons they are dish and never caused a issue for me in the past doing this.

@carleelittle3929 3 года назад

I know you have repeatedly stated you are not sure how well this work on a stock Y7 but im wondering if i would need a new ecu? Will this throw codes if i don't change the ecu?. Mine is stock and automatic and id like to keep it simple but add a little power.

@TristonSmith_ThePlumbingSmith 3 года назад

@@carleelittle3929 same bro

@skylinebros3162 2 года назад

@@carleelittle3929 if it’s auto this isn’t a good idea. Bucking on a stock converter isn’t fun

@bungius Год назад

what about vitara pistons?

@jovo21 Год назад

Can it work on a b15b vtec ?

@drizziog492 2 года назад

I never was a fan of the Honda’s/ricer scene, always a v8 die hard.. just so happened to have a couple drinks with a buddy and got to talking and had an elaborate idea of going to buy cheap Honda civics and throw cheap eBay turbo kits on them... so here I am now driving a 350$ 98 civic with a junkyard motor and it’s given me way more smiles than I could have ever imagined😂 sorry for knocking you guys in the past

@kolbeeoneal2526 2 года назад

Nobody understands how fun it is to beat the living shit out of a car and it just takes it lol

@Mr.Thermistor7228 Год назад

Exactly! People always trash on civic but as soon as I give them a ride and let them look at the build, how cheap building can be, and just how easy it is to learn on and build yourself they always are converted into at least understanding a lot more

@robinjobidon 4 месяца назад

I have a bmw 340i with about 430hp. I bought last year a civic 2002 for racing and wow. I love it! I add a stage 2 cam and tuned it. I now have about 170hp and have more fun than my bimmer haha

@codyhenry5079 4 года назад

Love from the neighbor next door. That thing is a beast.

@TexasHondaChannel 4 года назад

Thanks man!! You can verify its not slow since you rode in it. haha tell the people!

@nielsei 4 года назад

This channel is so underrated, everybody is hyping over channels who swim in the money making those highly sponsored builds. I prefer the practical budget way this man builds and paints. Its relatable and a more realistic approach for people like me who dont have allot of money to spend. Im a bit autistic and i cannot function on the workfloor and school as i want to. Im unemployed and still going to college music so. Thanks for posting this stuff! I hope you keep the motivation going! I really want my d16 shuttle/wagon to make like 200hp turbo.. havent got the money yet but eventually wel get there i hope

@TexasHondaChannel 4 года назад

Thanks i appreciate it i have some sponsors here and there they don't pay bookoo bucks or anything and 90% of what is done comes from my own pocket. I will always try to keep that broke joke mindset even if i become rich.

@panampizzaman7011 3 года назад

@@TexasHondaChannel you gonna go far, dont stop grinding! and please drive safe!

@markstroud4956 4 года назад

Great video. Love it when you test drive in Mexico.

@TexasHondaChannel 4 года назад

Yea i mean i can't do it legally in america but mexico is a little easier on their laws.

@mattstarnes2006 4 года назад

Love it man! I'm showing my buddies who are making fun of my 90hp civic now lol

@TexasHondaChannel 4 года назад

Hell yea man so many haters now days its stupid.

@mattstarnes2006 4 года назад

@@TexasHondaChannel well we all meet at a car meet bc I have a 05 Magnum RT with heads, cam, intake done so its weird for them to see me with my mini wagon now ,1990 ef hatch , half cylinders and half size makes sense to me

@skumboiz 8 месяцев назад

I ran locked vtec single cam for a year until i started wearing the head and cam down. Just a stock all motor running rotella 10-30. Idle is dope, and the power range is way better. Car was super fun but it did not compare at all to an all motor b series, let alone turbo. A turbo locked vtec would be an awesome build in the future, I think my friend still has my old rocker arms i might try to buy back

@Regal_Civic 4 года назад

Your Channel is really coming along I'm so glad to have tuned in when I did, to have been a part of this.

@TexasHondaChannel 4 года назад

Thanks for sticking by even when the channel was on its slower side.

@hookzsettv4842 4 года назад

Less MPG...can’t get the ponys if ya don’t feed em lol

@TexasHondaChannel 4 года назад

Exactly!

@andycapp8505 4 года назад

dang that 30 psi pull was beast! need some track footage or mexico footage ...

@BoostedPastime 4 года назад

mexico is always cheaper!

@TexasHondaChannel 4 года назад

AndY CaPP Yup just putting more content out so I can afford a new windshield so I can get some track time in!

@TexasHondaChannel 4 года назад

Boosted Fool indeed 😎

@andycapp8505 4 года назад

@@TexasHondaChannel lol u gotta catch a lambo slippin

@TexasHondaChannel 4 года назад

@@andycapp8505 If i find one ima race it for content :D

@kedaotuning 4 года назад

i always used those magnets drain plugs also the magnet the goes on the oil filter keep ur motor runing clean after a Breaking in period.

@boostedlawnmower9955 4 года назад

That single cam moves 🔥

@TexasHondaChannel 4 года назад

Thanks :D Once i get the issues fixed its gonna move even quicker!

@SIRICKO 4 года назад

My boy J ftw man keep it up. Good looking on the shout out.

@TexasHondaChannel 4 года назад

No problem man! I give credit where its due

@Casey_and_Cars 2 года назад

Pros - All of them Cons - None

@rainmaneg6240 4 года назад

Did you wrinkle the piping?

@TexasHondaChannel 4 года назад

The wrinkle black was already painted that when when i bought them from amazon.

@grownnotflown2 4 года назад

Nice work! Hows the gas gauge drop on that pull.. you know you're driving a race car when... Sick 🔥🔥🔥🔥 thank you

@sinformant 4 года назад

Great intro! We need to get you an aero turbine muffler. That thing would sound so deep, and with that lobe it'd be so mean sounding. My buddy had one on his civic and it sounded so deep, I've had one on multiple 4cyl cars and people always asked me about it.

@TexasHondaChannel 4 года назад

Yea ima go 3 inch exhaust soon and will be in the market for a better muffler

@sinformant 4 года назад

@@TexasHondaChannel also that insert isn't about how much pressure it gets. It makes the eagle screech at lower boost, it is more about slow velocity air. The bov needs to open further at a lower boost to get the eagle sound. Its probably why the design works so well in my ssqv. The gretty knock off I had like that either opened easy and wouldn't hold boost at higher levels, or would hold higher boost but not open easy. I think that is due to the design of it having a spring to hold it shut instead of boost pressure hold it shut like the ssqv does.

@TexasHondaChannel 4 года назад

@@sinformant Makes perfect sense

@williamclough6239 4 года назад

I do believe that the rocker arms in the d17a motor in the 2002 civic fit the d16 head. The d17 has roller rockers stock, which should help with the wear on the valvetrain.

@CorruptInfinityOfficial 4 года назад

William Clough yeah roller rockers straight up give you more power through reduced resistance I’ve seen with dyno pulls

@marley91crxsi82 4 года назад

Looking good james and good information on the cam swap

@TexasHondaChannel 4 года назад

Thanks man!

@BlueFlagGarage 4 года назад

That thing pulls hard as hell for a d series lol love the cammed lope it has now!

@TexasHondaChannel 4 года назад

Yea for sure! I LOVE IT!!!!

@Meeper2 3 года назад

Pro tip: Buy a $500 Civic then lock VTEC the race in the 24 hours of LeMons

@gabrielsanta277 3 года назад

How much HP do you have on that pull..? In intrigued. 30psi in one of this I'll say 400ish..?

@codysmith3857 4 года назад

Another great video buddy and keep up the good work and hope all is well with you and your family and keep living life to the fullest and God bless

@frostyflowers4207 4 года назад

Great video is fast and i own b18c doesnt come close to your D series on 0-134

@yourtypicalricer5987 4 года назад

Gonna do this when i get my crx vtec’d 🤤

@arnoldgasca9293 4 года назад

very nice info, thanks!! what is the link to the drain plug?

@TexasHondaChannel 4 года назад

OH CRAP sorry ill put it in the description and here it is rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575510466&toolid=10001&campid=5338547132&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FHonda-Acura-Dimple-Super-Magnetic-Oil-Drain-Plug-Engine-Transmission-M14x1-5x16%2F271366458956%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649

@darrenchin3481 7 месяцев назад

i have a locked vtec b20 with b16 head. My current issue rn is the engine wont idle by itself. It’ll rev out clean and everything but once it drops idle below 1500 it bogs out. Could that be related to it not being tuned properly?

@leoguardado13 11 месяцев назад

At least you were honest that’s all we can ask 👍 great video

@opalconnor7988 4 года назад

I need to know if this would work on a b18b with a Vtec cam

@alltheboost9943 4 года назад

Good deal man i just picked up a y8 cam and rocker arm assembly today. Ive heard of this but never seen anything on it. I plan on installing it soon. Luckily if anything happens i have a extra head and also have 3 b series blocks 😂😂😂. Hope to see a difference

@TexasHondaChannel 4 года назад

BOOSTED CIVIC Just remember it will need some adjustments for the cruising and stuff like that but it was a noticeable change over the stock y7 cam

@alltheboost9943 4 года назад

For sure man i currently have it apart upgrading quite a bit of stuff but thanks for the tip man.

@UntiI117 4 года назад

Loving it bro! Sounds badass

@TexasHondaChannel 4 года назад

Hell yea i enjoy this car as a daily! Even more fun going through the gears.

@251_Performance 4 года назад

Wondering if this is available for the D17A1 VTEC can in the D17A1 non-VTEC head? 🤔🤔🤔

@TexasHondaChannel 4 года назад

Not sure to be honest,

@evodingo3375 4 года назад

AKA adding a bigger cam.

@LowProOperator Год назад

You’re not wrong about the cam wear but to be fair pretty much every other four-cylinder engine on the market doesn’t have VTEC like Honda does. They have your typical variable valve timing, but nothing special. I’ve never seen Honda’s really have cam problems at all from my personal experience but maybe because you have a single lobe controlling two valves? correct me if I’m wrong but isn’t that how the SOHC engines are? Also, what’s your 0 to 60 time?

@kysonreber2658 2 года назад

Hey man, the link that you have for your tuner doesn’t work. Is he still doing remote tunes? Thanks!

@TexasHondaChannel 2 года назад

Yes he is on Instagram and Facebook. facebook.com/msengvixay620

@kysonreber2658 2 года назад

@@TexasHondaChannel awesome thank you so much! I love your cars and your channel is my biggest inspiration!

@alienfrmearth 2 года назад

Was it making 30psi boost or was it making a little over 15psi boost plus the atmospheric pressure?

@TexasHondaChannel 2 года назад

it was making 30psi but I have 8:8:1 compression so it helped me reach the level safely

@alienfrmearth 2 года назад

Just asking because a lot of people forget to subtract atmospheric pressure from their MAP reading.

@omarcontreras2437 2 года назад

Hi did your timing change when you lock vtec ??

@rogeliocortez5285 4 года назад

Love ur channel bro! So humble and very imformitive. If i got questions can i msg u on here or do u have instagram?

@TexasHondaChannel 4 года назад

Yes no problem and my instagram is texashondachannel just type that in and it should come up!

@benjaminlavallee6168 4 года назад

So amazing civic nice work bro:)

@TexasHondaChannel 4 года назад

Thank you!

@maartenl1947 4 года назад

Keep up the goodwork man !! Is it possible to do something like that on the d15b2 ??

@TexasHondaChannel 4 года назад

Yea if you run a d16y8/d16y7 or d16z6 head. Unfortunately it don't work for the d15b1,d15b2,d15b7,d15b8 heads but you could have piston to valve clearance issues if you run a aftermarket camshaft locked in. i failed to mention that

@rcmen2637 2 месяца назад

What did you do with the oil pump and the d16y oiling issues are they as bad as people say?

@Top-G35 4 года назад

Sounds amazing

@TexasHondaChannel 4 года назад

876 Productions I couldn’t agree more! I love it

@Kj16V 4 года назад

I'm confused as to the point in this. Is this a non-vtec engine with a vtec cam? If so, then I can understand why you would lock it. If it *is* a vtec engine then all you are doing is losing a whole bunch of midrange torque.

@TexasHondaChannel 4 года назад

Kj16V The d16y7 is a non Vtec engine non Vtec cam shaft and makes less power than a Vtec engine. For the people who want to run a bigger camshaft since there isn’t a lot of options out there for the Y7 non Vtec you can now run a y8 cam shaft which they have tons of options for. Essentially you are locking vtec in since there is no vtec solenoid on a y7 you typically can’t run a vtec cam in these heads. If you lock vtec you can now run a vtec camshaft: is it easier to just swap a y8 head on a y7 block? Yes of course but some people are difficult myself included. I did it to prove you can and it did make more power doing this as opposed to running the stock y7 camshaft.

@Kj16V 4 года назад

@@TexasHondaChannel Thanks for the explanation!

@_WESTSIDE_ 2 года назад

If was just swapping into my y7 would I need to get it tuned???

@jonatha17 Год назад

Yes

@jaccboyjohnny2805 4 года назад

first time tuning into this channel so answer me this, does my man have 30PSI running on stock IM and fuel rail?!?

@TexasHondaChannel 4 года назад

john thompson Yes stock intake manifold with port matched B18C throttle. The fuel rail supports up to 600whp. Seen it time and time again. I’m on 1000cc injectors with only 50% duty cycle so I’m not even flowing near enough fuel to worry about it. As for the intake manifold I couldn’t and still can’t afford a skunk2 or Edelbrock manifold so it’s gonna have to do for now

@jaccboyjohnny2805 4 года назад

Texas Honda Channel damn so i ordered upgraded fuel rail for no reason. i’m tryna do rebuild+turbo for less than 1k.

@TexasHondaChannel 4 года назад

john thompson Heck Yea I did my entire build including buying the car and paint and all for $3,000 the engine being built I only have $700 just on the block and head. Forged rods and vitara pistons arp studs and all that Jazz. If you haven’t seen my previous videos feel free to check the description i leave links in the description when I can.

@slowazzes1972 3 года назад

I have a 7th gen civic with a D17a2 non vtec, currently bone stock. I know these engines aren’t the best for building on to, i was just wondering some mods i could do to make a little extra power out of it.

@montane_west 4 года назад

what tuning software do you use?

@TexasHondaChannel 4 года назад

Hondata s300 with Smanager

@frostyflowers4207 4 года назад

30 Psi well built engine like the Honda knowledge not many channels have good knowledge can i just check you watching YT Pfi Speed for daily Honda FIX

@TexasHondaChannel 4 года назад

PFI has good stuff brent is a good dude. I appreciate you stopping in!

@tegnando2697 4 года назад

🔥💪🏼

@speedyme200 4 года назад

You can correct the speedo by using hondata to increase or decrease percentage values for an accurate speedometer?

@TexasHondaChannel 4 года назад

The speedometer is accurate i use GPS to verify. The reason its jumping straight up to 60-70mph is the tire spin lol.

@speedyme200 4 года назад

@@TexasHondaChannelsoo the speedo percentage value can be increase or decrease for accuracy??

@eddysevilla9648 7 месяцев назад

I came here from your other video... wanting to do that on a f22a1 ... know on motorcycles 250cc on the cam they have a little hole on the top of the cam that's for the oil to get in it and have the cam lubricated at all times...its a tiny hole you think that would help

@pablomarquez4431 3 года назад

Can you post another link for that magnet. The link isn't working. Thx bud

@NoLimitHd92 4 года назад

Can someone please answer me, can I put my d15z6 cam in my d16y7, or should I just swap the whole head

@gianhuman6520 4 года назад

Awesome content bro thanks 👌🏻

@TrungTheMaker 4 года назад

What do you think about duel stage boost controllers? Would one work well with your current set up?

@TexasHondaChannel 4 года назад

Trung The Maker I have a electronic boost controller on the car currently for boost by gear it has quick spool turned on and all and my waste gate spring is currently at 6psi spring and I’m hitting 29-30psi max off that spring but ima upgrade the spring to a higher one so I can turn up even more.

@FusedAdventures 4 года назад

I wanna vtec lock a d15 with y7 head for some reason haha

@TexasHondaChannel 4 года назад

If you have the PM3 pistons you have flat tops so you will wanna make sure the piston to valve clearance is ok. It should be but if you run a aftermarket cam locked you might have clearance issues.

@craiglawson6103 4 года назад

A cheap harbor freight magnet from them dollar pans may work good for oil filters. 🤔🤔

@TexasHondaChannel 4 года назад

Craig Lawson Yup they help!

@chapotheteg5544 3 года назад

Is your head built man? Can i do this to a completely stock engine? I'm gonna be doing a budget nitrous hatch soon and I wanna send it.

@taylorgall9516 3 года назад

Do CSS

@youngnboosted3847 3 года назад

15* at 30psi? That's alot of timing. What fuel are you on?

@rickyjohnson974 4 года назад

Damn bro when is this coming out on DVD 💪

@TexasHondaChannel 4 года назад

nick Anderson When someone signs me to be a paid reality star

@rickyjohnson974 4 года назад

@@TexasHondaChannel ur on your way man

@dustinninja2803 4 года назад

Is there a mod or aftermarket speedometer gauge to actually know how fast you’re going? Or like a dash swap with something?

@TexasHondaChannel 4 года назад

Dustin Ninja I use Hondata to see for now but im sure if I get a TYPR R cluster I would have no issues

@dustinninja2803 4 года назад

Texas Honda Channel i guess you could do a digital gauge too and put it near the other gauges

@Cartier_specialist 4 года назад

Are you sure it was going 134mph? If you didn't change speed sensor for the lower gear ratio the computer could be giving you false readings because the computer is receiving bad data. If you truly want to test that theory try a GPS speedometer.

@TexasHondaChannel 4 года назад

Positive it was. The tuning software has all that info in it that can be adjusted. We have the short gear transmission clicked. we have verified this in the past with GPS

@Cartier_specialist 4 года назад

@@TexasHondaChannel Well if you're sure that thing screams. You gotta be putting out 300+ horsepower and 300 torque for that kind of acceleration.

@yeefulor9954 Год назад

weird question I have a d15b7 mini me I'm doing and instead of running a p28 cuz I don't have one I was thinking maybe I just run the locker pins on po6 u think it'll be ok

@upnorthviking823 4 года назад

You did not mention valve springs...the y7 springs are pretty soft.not ment for high lift.rpms and 30 psi boost lol!

@TexasHondaChannel 4 года назад

Untouchable * The springs in the y7 are just as strong as the y8 btw. Is this the right way to do it? Probably not but does it work absolutely.. Also no stock components are meant for 30psi technically. The issue was blow off valve breaking and causing a boost leak and felpro headgasket crapping out due to them not being able to handle 30psi. I will get a real race cam eventually but money is tight so im doing what I can with what I have.

@upnorthviking823 4 года назад

@@TexasHondaChannel no prob did not hear you talk about it.yes they are the same i beleive. You will make more power w proper valvetrain down the road! Enjoyed your video,brings me back in time!gd luck w money,my build stays in garage for now...

@aragon1302 4 года назад

hey nice video,.. how much for the turbo set up,.. i see alot going for the ebay turbo kit, should i get that???

@TexasHondaChannel 4 года назад

Created Film I pierced mine together. Log manifold for $50, turbo for $161, intercooler kit was $159 oil feel and return line kit $40 in my other videos I have the stuff linked

@jacobdyer9568 2 года назад

still running 2 years later ?

@hmoobva3581 Год назад

Locking VTec Does not increase turbo spool/power, the low cam will causes the turbo to spoiled faster at low end, lock vtec at low RPM makes your car run more of a dog versus small profile lobe. Locking pretty much just gives you advantage of a VTEC issue arising and a race motor (aka top end) And of course gives you that sound, but sound doesn't add horsepower does it??

@bamudeadson 2 года назад

What's the eagle whistle lol? I googled it but no results

@TexasHondaChannel 2 года назад

It’s in my other videos like my green Ef hatch.. It’s my blow off valve

@blueridermg 3 года назад

What program are you using to tune ?

@randomgamer6118 4 года назад

Why not starting with a non vtec head? Wouldnt it be effectively the same with just a cam?

@TexasHondaChannel 4 года назад

RandomGamer This is a non vtec head on the car in this video and the y8 cam and rocker assembly made it where you can run the popular y8 camshaft with vtec locked in. I ended up swapping to a y8 head since this head ended up having a warped head after the headgasket failed.

@jaybee6477 3 года назад

Yes

@DaOnE51T 4 года назад

In here for some 1/4 mile times on slicks

@TexasHondaChannel 4 года назад

Same here! Im just saving to replace the windshield thats $200 by itself. Then ima buy some slicks and make some passes.

@dannanova1474 3 года назад

bro if i can use the y8 cam in the y7... can i use the y8 aftermarkets cams?

@alwaysbroketv 2 года назад

No you can’t the stock y7 rocker arm assembly is different

@spankthemonkey3437 2 года назад

@@alwaysbroketv yes he can you have to use vtec rockers

@TURBOTRISTO 4 года назад

When is the dyno video?

@TexasHondaChannel 4 года назад

TURBOTRISTAN when I can afford to get it there and when I get the time. Lol 😂

@cpolt1192 4 года назад

Everyone clicking on this Please Understand THIS IS FOR A NON VTEC HEAD....THE Y7 IA NON VTEC...THE Y8 CAM GIVES YOU THE BETTER LOBE FOR MORE BREATHING. ITS A GREAT WAY TO GET A BETTER CAM PROFILE WHEN THERE IS VERY LITTLE AFTERMARKET SUPPORT.

@thatgaykid420 3 года назад

Ohhh- that makes sense. I’ve never heard of v-tec locking, and I have a stock 99 ex with a d16y8

@davidmedina9098 2 года назад

Esto prácticamente es como activar vtec antes no?

@That_boostedhatch 4 года назад

Would it be fine to do this mod if I don’t have rods and pistons I’m on stock rods and pistons

@TexasHondaChannel 4 года назад

ahh forgot to mention this! -_- If you have flat top or high dome pistons the piston to valve clearances might need measured but i know it works on stock y7 or y8 pistons

@That_boostedhatch 4 года назад

Texas Honda Channel ok so basically I’m same save to do this mod

@TexasHondaChannel 4 года назад

That_boostedhatch 2001 Yup

@NewsOnQueue 4 года назад

I have the 05 dx-vp. It has the stock d17a1. Is the a2 vtec head a direct swap?

@MegaWeeds420 4 года назад

No the a2 is a K series engine. kinda looks like a single cam but its not

@GT-cw7ed 3 года назад

@@MegaWeeds420 he means d17a2 sohc

@stealthgang-pubgmobilegame8473 3 года назад

How is it holding up as of now man?

@codcade 2 года назад

How much does this hurt reliability?

@kadehinojos2598 2 года назад

Ive heard it doesn't like cold starts too much. atleast on a D-series not horrible just rough idle cold and sometimes you may have to keep it running with the pedal until it warms up enough.

@yungblaze223s 11 месяцев назад

@@kadehinojos2598can confirm. Thats exactly what it does.

@2_2_4_3 4 года назад

Heard it's a rough ride.... At low to mid rpm.

@TexasHondaChannel 4 года назад

Not after its tuned properly it drives just as good as the y7 cam did. Now before retune it did buck a little.

@alltheboost9943 4 года назад

Hey man i meant to ask u. I know u have hondata but can it be done on a chipped p28 thats tuned?

@TexasHondaChannel 4 года назад

BOOSTED CIVIC yes but it would need live tuned to adjust everything

@alltheboost9943 4 года назад

@@TexasHondaChannel okay just wanted to make sure. Im currently doing the rear main seal as we speak so just wanted to check

@CornfedSedan99 4 года назад

Hey thanks for the video I watch all of the vids you upload is there any way I can do this on a d15b7 what rocker setup do I need and what cam

@_Detail.Society 4 года назад

I need 2 know this 2 plz

@kennethfrazee2540 3 года назад

Z6 head bolts right on, around 10.5ish cr on b7 block

@TheJrm159 4 года назад

Can I put a locked vtec cam in my EF d15b2?

@TexasHondaChannel 4 года назад

I don't believe so because it requires the swapping of the rocker assembly and the rocker setup for a d16z6 or y8 don't fit the head casting of the D15b1/b2/b7 style heads.

@TheJrm159 4 года назад

So what would be my best option? D16 head? Or just trash my d15 has a whole and go D16

@classiic8169 6 месяцев назад

Can you take out the Vtec lock?

@jeancarlosbonaticereyes4728 4 года назад

Do you recommend doing it in a daily use car? greatly increases fuel consumption by doing so?

@dannycar25 3 года назад

if it's your only car I would not recommend. yes it will increase fuel consumption.

@quisarn7809 5 месяцев назад

Will a y8 cam fit a y4?

@KKDriver 4 месяца назад

Yes but in order to utilize vtec you will need to lock it like he did here… I’ve locked vtec on a Y7 and a ZC head, and for a z6/y8 the only extra thing you’d need is a vtec block off plate. The Y4 is pretty much if not the same casting as a Y7 non vtec head.

@Dafastso Год назад

why would you bounce off the redline during acceleration? literally just lost acceleration doing that

@meowmymix3957 11 месяцев назад

Waiting for traction

@tysonsignett4274 9 месяцев назад

never driven a fast honda huh?

@skumboiz 8 месяцев назад

You have too with high horsepower hondas or you will bog and loose boost. Hondas are back half cars, they do not get off the line until they are AWD. Spinning tires 1st and 2nd is always necessary no matter what. I see your same comment so many times and nobody seems to get it

@user-rt2sm5ny5r 8 месяцев назад

This thing rips! Is the head code for this y7: P2A-(2,4) or P2F-HA-(2,3,4)?

@that_white_civic 4 года назад

I’m curious could you do this with a z6 cam on a a6 head?

@TexasHondaChannel 4 года назад

That_white_E36 The rocker assembly and head casting is different so I don’t think it would. Only 1 way to know is try but the cheapest way to do that is test it out at a junkyard that way it won’t cost you anything hehe

@that_white_civic 4 года назад

Texas Honda Channel right I mean worse comes to worse I try and it doesn’t line up well enough I could always do a mini me but really don’t wanna pull the head yet hah 😂

@RACEALOTGARAGE 4 года назад

Is this on pump gas 93????? No octane booster or meth?

@TexasHondaChannel 4 года назад

No octane boost just straight outta the pump. Wait till you see what i made on 93 octane. Video dropping soon

@RACEALOTGARAGE 4 года назад

@@TexasHondaChannel 😱 brave soul. I love it. Youre sending it proper brotha👌🏿

@TexasHondaChannel 4 года назад

RACE-ALOT- GARAGE Yea the timing isn’t turned up too high since it’s still on 93 pump. My tuner knows his stuff really good though.

@gavinmcclure8047 3 года назад

Damn I missed out on the magnetic drain plug.

@avapire2359 4 года назад

i know the f22b1 is a very underwhelming vtec engine, but i still want to know if you can lock vtec with it

@RedLineBandits 4 года назад

You can I’ve done it with a f23a. All you need is a junk head or some pins from a junk yard.

@covid-mx9ng 4 года назад

Isn't this the same engine that's in my 92 Accord lx??? I'm almost posative it is but mine isn't vtec I'm confused I just now found out about locking vtec about five minutes ago

@RedLineBandits 4 года назад

covid 19 you most likely have a f22a1 so non vtec.

@EvilJoshua 4 года назад

i cant see the link for the oil pan bolt?

@TexasHondaChannel 4 года назад

That's odd ima have to try and re put it in the description.

@EvilJoshua 4 года назад

thanks

@ethanrowland9220 4 года назад

Me looking at my civic thats only pushing 10psi 😒

@alonzojohnson56 4 года назад

Any work done to your block ?

@TexasHondaChannel 4 года назад

On this setup that was installed in this video yes. I have video of me putting forged rods and vitara pistons in it.

@erikmartinez931 3 года назад

Who is your tuner ?

@chrishernandez2490 4 года назад

Bruh, SIRicko says to NOT lock your vtec. He calls it a half ass way of running a vtec killer cam

@TexasHondaChannel 4 года назад

We both do agree on this it being a half ass way to having Vtec killer cams but since these D16y7 and d16y8 don't have vtec killer cam setups available to buy this is the next best thing in my opinion.

@seanperry2507 4 года назад

Which motor is that

@TexasHondaChannel 4 года назад

D16y7 forged rods,vitara pistons, arp head studs y8 cam with vtec locked so the cam fits in the engine

@Leon-fo9mj 4 года назад

What I want to know is how are u getting past the speed cut off.? My hatch cuts off at 118 mph n its fuckin annoying... Is it possible without chipping ecu.???

@craiglawson6103 4 года назад

BJ use P28

@spankthemonkey3437 2 года назад

Put a kill switch on your speed sensor

@MWM650 Год назад

Can I get a mod list?

@bashim05 4 года назад

As you said, wearing of valvetrain is one cons.. Can i use more short locking pins to make @3,000 rpm vtec kicks in. Vtec cylhead user.

@juanroldan4441 3 года назад

You can just tune your ecu to "kick in" at 3k but I dont see why you would do this

@4door_papi 3 года назад

Run good oil itll be fine

@davidmedina9098 2 года назад

Entonces esto de bloquear el vtec es como activar vtec desde 2mil revoluciones prácticamente no? Con un control Apexi podría lograr eso sin nesesidad de poner esos pasadores que bloquean el Vtec prácticamente no? 🤔