PS4 Controller Calibration Software 🛠 IT'S REAL!! WE NEEDED THIS BACK IN 2014! 🛠

Подписаться 9 тыс.

Просмотров 27 тыс.

50% 1

This is some software I've been waiting almost a decade for! I always knew there was some leaked Sony calibration tool... However it seems someone (The_Al) has made it happen.
Here is "The_AL's" Blog.
blog.the.al/
Here is the software:
github.com/carpikes/ds4-tools
To book a console or controller repair contact us here:
www.ubermicro.co.uk
Equipment used in this video:
Atten ST-862D Hot Air Station: amzn.to/3PRXoF6
Aixun T3B Soldering Station: amzn.to/3CTc6Un
KSGER T12 Soldering Station: amzn.to/44oBBZI
KingBo Flux: amzn.to/3PSSCXR
KESTER LEADED SOLDER 5M LENGTH: www.ubermicro.co.uk/product/k...

Игры

Опубликовано:

31 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 162

@karelleet 2 месяца назад

They just released a web ui version of this on 9 april and you can very easily recalibrate the controlleres now, we just found the holy grail of ds4 technology

@Soulfly-BR 2 месяца назад

up!

@nik12937 5 месяцев назад

Huge thanks for the video! Having properly calibrated Hall-Effect sticks is like a dream come true.

@ofdeadkiller 4 месяца назад

i work with the orange Hall-Effect or the siver king Hall-Effect ?

@hussamjdetawe2858 Год назад

I was suffering from a slight deviation after replacing the control stick, and the only solution was to search for sensors with a certain resistance to reduce the deviation, but now there is no need for that. Tested on jdm 055 and the result was amazing, wow, thanks everyone.

@estebanmedina4263 Год назад

Thanks for posting this vid!! I used a linux live distro to eliminate the changing drivers steps and it worked like a charm! Tested on a JDM-030 and JDM-040 so far with 100% success! Thanks for finding this and sharing it!!

@UberMicroRepairs Год назад

No problem, glad you found it useful. I was tempted to spin up Ubuntu but I use Windows on my workshop PC so was determined to get it going. This method was a quick and dirty way of doing it, for this video.. I've since used this on almost all PS4 DS repairs now and refined it to the point where it's as (not quite but close) quick to manually calibrate them.. It's not perfect. I've done JDM- 010, 20, 30,40 50 & 55 so far, so good!

@RosieBee463 7 месяцев назад

This is a great tool, thanks to whoever wrote it. I did a X axis inversion mod on my camera stick and was able to use this to recalibrate it. One thing I don't think you mentioned was the flash mirror option, which apparently controls whether or not the calibration changes are temporary. At first my controller would look fine in Windows after running the tool, but when I connected it back to the playstation it kept resetting the calibration to what it was originally. I had to set the flash mirror option to 0 to make it stick.

@smartphonerecovery 7 месяцев назад

where is it the flash mirror option? and how i can set it to 0?

@SeniorCometaRojo 6 месяцев назад

Could you explain more this? there´s no clear info about it.

@RosieBee463 5 месяцев назад

@@SeniorCometaRojo @smartphonerecovery I don't remember exactly, it was just a command line option on the tool, not complicated. I can't run the tool right now because I already uninstalled the USB driver and python. I pulled this from the code, so maybe just try these. # GET Flash Mirror Enable + SET Flash Mirror Enable p = subparsers.add_parser('get-flash-mirror-status', help="Get flash-mirror status") p.set_defaults(func=handlers.get_flash_mirror_status) p = subparsers.add_parser('set-flash-mirror-status', help="Change how flash mirror works") p.add_argument('temporary', type=int, help="Set if changes in configuration are temporary(1) or permanent(0)") p.set_defaults(func=handlers.set_flash_mirror_status)

@user-tg8sc4dl6m 9 месяцев назад

bro, you and developments of this is amazing. Thanks from Mother Russia gamers

@moyaphx3888 6 месяцев назад

If the calibration reset after you unplug the controller you should try this : before calibration you need to run this command first: "set-flash-mirror-status 0" then after calibration is complete. run "set-flash-mirror-status 1" to make the changes permanent.

@UberMicroRepairs 6 месяцев назад

No worries. This was a quick a dirty video when the program first came out. I've been using this everyday since and done many controllers and have since got all the driver issues sorted and commands correct. Just part of my normal work flow now.

@kavogaming5352 5 месяцев назад

Mine didn't reset, does that mean its okay to work on a PS4 I mean ?

@John-oo9xu 2 месяца назад

But what if Sony pushes a new firmware update than it overwrites it and the problem is back. Could be wrong

@vincentlee5112 11 месяцев назад

That's wonderfull work! Solved my problem.

@alexsnow8894 10 месяцев назад

OMG! It actually stays solid. No drifting. Absolutely amazing. Can I just add. When you delete libusb drivers from device manager and refresh PS4 controller will appear as 2 wireless devices under Universal serial controllers. It will be the last device group. Erase then with uninstall driver option, refresh and controller back to normal.

@ngplus707 7 месяцев назад

Strangely it just kept reinstalling the libusb0.sys automatically and popping back up as a libusb device soon as I plug the controller back in. After repeadetly uninstalling the device+driver 3 times it showed up as you've said and after a final uninstall it finally showed back up as a usable gamecontroller. Would be great if Zadig offered an option to revert to the previous HID driver usable under Windows 10. It

@AceStrife 8 месяцев назад

For not being a tutorial, it sure felt like one! Sadly, can't get the python script working, just errors out with "parameter not found". Thinking an older Windows 10 version isn't supported.. only one report about someone on LTSC having the same error, and I'm on 2004. Time to see if a Linux VM works better.. or worst case, dual boot an updated install. Edit: Yeah, a Linux VM worked. 4 hours from exiting game due to stick issue (from cleaning attempt) to finishing calibration; there goes my night. Thanks so much for this video. Saved an absolute nightmare scenario for me.

@Jacksoft 8 месяцев назад

Tested on 3 pads. It seems to work!

@ShibbyWahWah Год назад

Absolutely awesome! Thank you so much. Worked also perfect on Win 11, using VSCode.

@UberMicroRepairs Год назад

Glad it helped!

@user-nv2ul1xm4l 11 месяцев назад

what python version you installed? 2.7 or 3

@ShibbyWahWah 11 месяцев назад

@@user-nv2ul1xm4l I think it’s been Version 3. VS Code keeps the plug-ins very tight up to date.

@ydiadi_ 7 месяцев назад

thanks alotttt brother , superb

@valdo__1154 Год назад

Yeah this would have been awesome some time ago but now I have my hopes in that Gulli kit will one day release thumbsticks for controllers and not just for the nintendo switch 😀

@UberMicroRepairs Год назад

I have my reservation on the Gulli Kit. History repeating... These types where in some models of PS3 controllers.. and they suffered with drift.. The magnetic pot where perfectly fine.. it was the scissor mech that wore out. .. Hall effect pots will only last a short amount of time. The mech in the module will wear out!

@Flowkeyz Год назад

Wow indeed very bitter sweet. Who knows maybe DS5 Calibration is coming sooner.

@UberMicroRepairs Год назад

Maybe .. Who knows? I would lean towards DS5 controllers being more locked down.. This was only found out from a PS4 source code leak that contained a ds4 controller FW and The_Al deconstructing it to bring this tool to life.

@PapaGleb 7 месяцев назад

Great vid mate, glad I ran across your channel. If the script was written for ds4 then I would guess it would also be written for a ds5 with time. How would you deal with drift before this script?

@UberMicroRepairs 7 месяцев назад

I manually calibrated them and range was calibrated with height and module placment. Plus afew company secrets. tricks.

@allesklar7267 10 месяцев назад

May you do a quick tutorial how to install this python package properly? I am struggling 😅

@kiryhara 4 месяца назад

Si como hiciste, yo todavía no puedo

@gnwekest6950 10 месяцев назад

I attempted to install the driver using zading in a similar manner, and I tried mimicking the process of interrupting zading in Task Manager midway. However, the color of the controller's lamp does not change from yellow to red. How can I make the lamp turn red? Calibration couldn't be performed while it's still yellow.

@user-fk4mv2zh6l 11 месяцев назад

Hey bro, after i did it , i tried to reset from button and then its not in center anymore i did it 5 times and center but it does not store the calbiration after button reset or totally power off, is thier a way to store it permentaly

@marcocruzmartinez5055 6 месяцев назад

Hello, thank you for this incredible video, it has been of great help to me, but one thing happens to me and that is that some controller after carrying out this process does not synchronize with the play, what could be the reason?

@EUCRAZY_AU 10 месяцев назад

Excellent does the PS5 sticks need calibration after stick replacement if so how is this done ?

@Urwis23 7 месяцев назад

Thanks a lot, thanks to you I saved my PS4 controller. Will this work with a ps5 controller?

@muratrisvan 7 месяцев назад

Thanx master ❤️🇹🇷

@adamkort 7 месяцев назад

hi, can you tell me how to return the factory calibration, there is a saved dump, how can I write it back to the joystick?

@controlman17 Год назад

Somehow I change the driver wrong way, so now my computer can not recognize the controller, how can I restore driver correct way>? I unistalled interface 0 and 3 , but still have issues

@Daaell 6 месяцев назад

ohh god, I wish we have this for PS5. I just replaced both analog joys, and ofc the right stick is still drifting. I was lucky with the left, almost right in the center. I despise Sony for not allowing joy calibration.

@ErcleeIsBoss 5 месяцев назад

do you know if the same thing exists for xbox controllers? i know you can calibrate it on the machine you are using it on (xbox or PC) but I can't find any info on uploading a calibration to the actual controller.

@misaka9946 6 месяцев назад

Thank you very much for this video, I saved many dying PS4 controllers. However, I found that there is a problem with the motherboard model 055. After replacing the new joystick (the shaft is ALPS and the potentiometer is 10k), the center point of the joystick shakes at a high frequency after calibration, although it basically does not affect the game. But I would like to ask what is causing this. It will not happen on motherboard model 040.🤔🤔

@DiceRollX19 17 дней назад

My right joystick lost its calibration after it fell, so I replaced it with another one, problem is it works fine in Elden Ring, but in Need for Speed Hot Pursuit Remastered when I use DS4Windows the camera is set to back as if I'm holding down on right stick, before change it it was fine, funny thing if I close DS4Windows it works fine.

@rostislav3388 9 месяцев назад

Could you tell me, will a ds4 works with this changes on PS Vita?

@Xtoro21 Год назад

Finally!!!

@UberMicroRepairs Год назад

Yes!!

@kuclaw5406 Месяц назад

hello, after calibration I can't use controller with BT, When I plug controller to PC, controller work. When unplug controller, controller dont work. Battery is good, I tested it on another controller.

@Arvissz 4 месяца назад

I see that you have JDM-055 board. Maybe you know does this software is working on onther boards?

@giorgimamardashvili. 11 месяцев назад

I fixed left side, but was not able to fix right side analog drift

@peacez5781 Год назад

I tried "store calibration" without sampling the data, but it didn't work out. Then I read The_AL's blog and I followed their examples. Tried "sample data" twice and it worked 😀 So, here's how in the command prompt: 1. W only (nope, didn't work) 2. S, S, W (Boom! Works like a charm every time)

@UberMicroRepairs Год назад

Correct.. Best to press S then move the sticks, S, move S, move S, move then W to save the changes. The more samples the better the accuracy. Same with the Range.. Do it two or three times.

@sfigas103 10 месяцев назад

I do everything right but I can't save the settings, can someone tell me how? thanks

@lapelatomates5724 7 месяцев назад

That did it! So many years looking for a proper DS4 calibration. This is amazing!

@drewmorama 7 месяцев назад

I just calibrated my gamepad, everything is fine. It’s just not clear why in point 1 when setting the center, they write to press S for a sample. Why and what does this affect? Also necessary to mention, that both analog need to be calibrated, otherwise one will be calibrated and the other will go wrong))

@dokitabado 6 месяцев назад

Nice video, thanks, I used it for the calibration of my pads, it worked. Tested on 3 pad, one v1 and two v2, center, circularity and L2 and R3 calibration. I've only two problems, the v1 pad has stopped to working via USB on my pc, I can't make driver working again, the other problem was an Hall effect stick, the calibration not worked well, circularity is better now but not perfect like the original stick. The Hall effect stick I tested is the first version of orange and black with the white PCB, I don't know why the calibration don't work well with this stick, it has only the right down corner fine, the others are almost a square.

@dokitabado 6 месяцев назад

The strange thing with the pad with the circularity problem is that it was almost a square even with the original stick (I don't tested the calibration before changed it), I changed it because it was drifty. I have another v2 pad to test, I don't remember well but maybe this pad has the same original square circularity

@dokitabado 6 месяцев назад

"original square circularity" I'm not very sure, because I bought it used, but the stick seems to be original and untouched.

@thebluecomet3974 6 месяцев назад

Does this work if im playing on my console rather than a PC?

@aphaseelec Год назад

If i got flux inside the Potentiometer would that cause problems with accuracy. I changed the analog and it fixed L3 but now i have stick drift.

@UberMicroRepairs Год назад

flux in the pot won't help. Clean it all out with IPA.

@JuanmaTsukuyomi 5 месяцев назад

Would this work to fix the circularity of a new joystick? I replaced the entire module, but when I run the circularity test on the gamepadtester it shows a larger circularity error and a square shadow instead of a round shadow compared to the original joystick.

@legitcrack6438 4 месяца назад

no luck for me either, set the center perfectly but range min/max doesnt seem to do anything

@reckless710 11 месяцев назад

Is it possible to mod a PS4 controller to show up as a ps5 using a PC

@leg00s324 6 месяцев назад

Had some issues with python, any clues about what it could be?

@karlhartl7371 11 месяцев назад

anyone knows a way to calibrate ps5 analog sticks.. or some sort of ds4 tools for ps5?

@mahmacha13 4 месяца назад

thank you very much for the video but I have a problem when I put "cd ps4 calibration" it doesn't work it displays The specified path was not found Do you have a solution ?

@legendaryzfps 3 месяца назад

its just the folder name, for you something like cd C:\users\(your username)\Downloads\(your folder name)\

@Asynchronous- 6 месяцев назад

Has anyone tested this tool on windows 11? Im doing every step successfully and it all works but my out of center sticks remain the same. I did set the flash status to 0 before calibration and after calibration again to 1 aswell, didnt help. I replaced both analog sticks and they remain perfectly symmetrical out of center with -0.11373 and 0.05098 for the left and nearly identical opossite for the right stick. Feeling like the potentiometers are fairly out of center by factory and i cant fix it with this tool. I also tried to run the script via Admin powershell, also no success

@misaka9946 6 месяцев назад

You can try to find the middle value of the potentiometer to calibrate, for example, the left and right joystick [mix is: 0.00392 max: 0.05096], then you can push the joystick to 0.02548 as the center point to calibrate. If the value of the potentiometer is too large, then you may consider replacing the potentiometer instead of replacing the rocker.

@Witoskratos 11 месяцев назад

возможно требуется ещё одна программа для запуска делал всё как на видео ничего не выходит.

@Aymen-ye3kv Год назад

i have used both s and w and nothing works i still have a slight deviation in both joystsicks any fix ? and thanks btw for sharing this. ps : joysticks are new

@allesklar7267 10 месяцев назад

same. Did you also try it on the JDM-030 board?

@Stounage 7 месяцев назад

hello, when i try to start the script, it prompts another window open and asks me to choose a program to run it, i did execute cmd in administrator mode

@Gaiet4 3 месяца назад

Pudiste solucionar?

@xuzlnx Год назад

how do i run the command on cmd i cant get anything to work

@GOATGamerProSticks 6 месяцев назад

I've only just realised the vibration tester actually works now using my mobile phone 🤳 on gamepad tester, if anybody missed that 🤷🏼‍♂️?

@nikeshgupta8362 Год назад

Hi your video missed a step of storing the changes without which the calibration is temporary.

@UberMicroRepairs Год назад

Correct. This was just a rough quick video. So yeah before calibration you need to run this command first: "set-flash-mirror-status 0" then after calibration is complete. run "set-flash-mirror-status 1" to make the changes permanent. However I have done tests where I've not touched the flash mirror and the changes have saved even after the was battery unplugged and controller reset. IT's seems like sometimes it's not needed, but for the sake of two commands may as well do it.

@Gaiet4 3 месяца назад

Seleccione una aplicación para abrir este archivo .pt, Que puedo hacer ayuda

@dumbitkiller5075 6 месяцев назад

Hello, does it also work with xbox controllers?

@alexlitkovets 5 месяцев назад

If I make "set-flash-mirror-status 0" before calibration, and forget to do "set-flash-mirror-status 1" after. It's important? Are there any problems due to this?

@UberMicroRepairs 5 месяцев назад

If you gorget to set it back to 1 the FW can revert back to the original calibration.

@natanpereamotato9560 2 месяца назад

For ps5 control calibration for pyhton ?

@qlum 9 месяцев назад

Works like a treat, I will add here that on linux it's simpler as you don't have to mess with changing the drivers. So if anyone has a Linux machine, I'd recommend using that.

@hakimehamdouchi7468 9 месяцев назад

Can you please elaborate on how to do that on Linux. Do I just cd into the script

@qlum 9 месяцев назад

@@hakimehamdouchi7468 Basically just git clone, cd into it and follow the instructions only thing I did diffent was create the venv with python -m venv instead of virtualenv

@speakthetruth3684 8 месяцев назад

Luckily I have a 16" MBP M1 Pro and as it's unix based it's also just as simple as running the script. from start to finish you can calibrate the sticks in under 30 seconds.

@gamer2controller 5 месяцев назад

¿ Existe algo así para mandos de ps5?

@martinsamuelsson2322 8 месяцев назад

ever found a solution for ps5 calibration?

@richboss_ 9 месяцев назад

Will the calibration carry on when you use the controller on the ps4?

@UberMicroRepairs 8 месяцев назад

The calibration if done correctly will be permanent.

@user-nv2ul1xm4l 11 месяцев назад

what python version should i install? 2.7 or 3 and above ? or 2.1?

@UberMicroRepairs 11 месяцев назад

Dont know... Anyone that works.

@maxa4kala05rus7 10 месяцев назад

Dualsense calibration pliz

@maxa4kala05rus7 10 месяцев назад

На ps5 сделай обзор регулировки стиков.

@moneyboy503 Год назад

hey sorry, i gave the video a skim and didn't watch the entire beginning but i'm noticing that you're basically connecting the controller to the pc like normal, is there any reason that it's apart? does it NEED to be taken apart? i just got some drift fix kits with the potentiometer screws to do this manually on the board but it doesn't hurt to have multiple fixes in my repertoire

@tomasbertasius2840 6 месяцев назад

Center calibration work perfect, but circularity doesnt work, all time get square. I didnt bad something?

@legitcrack6438 4 месяца назад

same boat, did you find a solution?

@tomasbertasius2840 3 месяца назад

@@legitcrack6438I have solution only when change analog, dont change potentiometers, add analog when add old potentiometers to analog and when solder. And if need now can change potentiometers. so there is less chance of losing circularity.

@MonkeyDMotaz Год назад

I need help PLZ , so whenever I try to calibrate my ds4 controller the calibration never get saved , even when enter "set-flash-mirror-status0" command, any fix?

@MonkeyDMotaz Год назад

jdm055 model

@UberMicroRepairs Год назад

"set-flash-mirror-status 0" then once calibrated enter "set-flash-mirror-status 1" There is a space before the 0 & 1

@MonkeyDMotaz Год назад

@@UberMicroRepairs Thanks! I figured out what was causing the proplem

@joelrothbauer7062 Год назад

@@MonkeyDMotazI have the same issue. How did you solve it? Ty already

@MonkeyDMotaz Год назад

@@joelrothbauer7062 look at the description of the Video , you will find the tutorial

@427cidpower Год назад

Does it tool like this exist for Xbox One/Xbox series?

@UberMicroRepairs Год назад

Nope nothing for the Xbox.

@riskiagustiawan9783 7 месяцев назад

Does this work also for hall effect?

@kiryhara 4 месяца назад

Yes

@karlhartl7371 11 месяцев назад

my guessing you just have to do another full tutorial.. proper complete tutorial

@UberMicroRepairs 11 месяцев назад

Nah. Leaving it there for now.

@Finditfixitphilipit Год назад

👍

@UberMicroRepairs Год назад

🤘

@That0neDud 10 месяцев назад

can you make an actual guide because there is no other documentation and this may be a suprise to you but not everyone knows about python scripts

@UberMicroRepairs 10 месяцев назад

We will see. I have alot of work to do recently. Also I know nothing about Python / scripting. I was just bumbleing through it to get working.

@nerijusk9598 6 месяцев назад

Wow. How about ps5 the same callibration how ps4 controller?

@NandiFIXstuffs Год назад

whats about the left stick? looks like it still drifting

@UberMicroRepairs Год назад

Yeah the sticks are worn out on that controller. I was showing the software calibration will only help so far. I'm sure I explained that in the video!

@NandiFIXstuffs Год назад

@@UberMicroRepairs yeah already did some test with virtualized linux. Looks better solution then swapping the drivers

@NandiFIXstuffs Год назад

@@UberMicroRepairs oh, btw u skipped the part when u enable the programming phase.

@UberMicroRepairs Год назад

@@NandiFIXstuffs Yeah I missed loads out.. this was a quick vid just showing that this tool is out there and how it can work 1: with an ok analog stick. and 2: with a worn out stick.

@erraddict 8 месяцев назад

DualSense controllers too?

@UberMicroRepairs 8 месяцев назад

Nope

@scottreidel5992 4 месяца назад

can we get this in the PS5? that would make this better

@UberMicroRepairs 4 месяца назад

Nothing like this will be out for the PS5 controllers anytime soon IMO..

@YoCreedgg Год назад

will this also work for ps4 if done on pc

@Urwis23 7 месяцев назад

Yes

@user-kl1st7hn1o 9 месяцев назад

Is there similar software for xss controller?

@UberMicroRepairs 9 месяцев назад

Unfortunately not.

@user-kl1st7hn1o 9 месяцев назад

@@UberMicroRepairs if this is the case,how do bbc or scuf calibate their joystick like dualsense or xbox？using parallel calibration board or series resistor

@user-kl1st7hn1o 9 месяцев назад

Or adjust the potentiometer slider？@@UberMicroRepairs

@sampreeth3169 6 месяцев назад

Will this work for a ps5 controller?

@UberMicroRepairs 6 месяцев назад

PS4 only.

@Ilegator 9 месяцев назад

Wait, so the calibration stays no matter where you use it??

@UberMicroRepairs 8 месяцев назад

Yep.

@Ilegator 8 месяцев назад

@@UberMicroRepairs that's great. Thank you. I always had to do some tricks to get them aligned. So tedious.

@Ilegator 8 месяцев назад

@@UberMicroRepairs wow I didn't even realize u were Uber Micro Repairs. Your channel is great. Thanks for sharing this.

@recklessglitch 4 месяца назад

Is that calibraion saved on that very PC? Because if it is stored on the controller SONY SHOULD HAVE DONE THAT right from the bginning, HELL! We used to calibrate our joysticks like tha back in the 90s all the time! rangrgdhggegegGodddamJappaneeseCapitalistsssssss!!!

@MotorBorg 2 месяца назад

It is saved in the controller. Planned obsolescence! Who would buy new controllers if old ones could be recalibrated at any time? Sad world we live in.

@its_thechese2416 11 месяцев назад

Does it work on a PS5 controller??

@UberMicroRepairs 11 месяцев назад

Nope.

@orryyang8846 3 месяца назад

Can I do it on macbook?

@UberMicroRepairs 3 месяца назад

If you can get Python running on the Mac you should be ok! I don't do Mac though, So I'm useless to you.😅

@SaddamyGaming 4 месяца назад

Is this working for a DS5 ?

@UberMicroRepairs 4 месяца назад

Nope nothing for DS5 controller yet.

@SaddamyGaming 4 месяца назад

@@UberMicroRepairs thank You for your information Appreciated man

@GOATGamerProSticks 11 месяцев назад

My god im not even PC literate, loved MS paint 🎨🖌️ for product diagrams to within .05mm scale depiction per pixel 👍🏼, im dinosaur 🦖 backwards or special 🫠🤤.

@remgor5791 11 месяцев назад

Is there any software like this for xbox controler, it would help a lot.

@UberMicroRepairs 11 месяцев назад

Unfortunately not.

@popcornfz2h 6 месяцев назад

no clue how to use the CMD -

@UberMicroRepairs 6 месяцев назад

Welcome to the club. If you keep at it you will learn.

11 месяцев назад

any ps4? nobody for xbox?

@consolemods3271 9 месяцев назад

never got this working,,

@speakthetruth3684 8 месяцев назад

What issue were you having and have you got it working now? I just tested it for the first time and it worked perfectly.

@consolemods3271 8 месяцев назад

@@speakthetruth3684 really cant say ,, maybe am running the program wrong, but wend i but the app with DOS.. it wont work

@consolemods3271 8 месяцев назад

@@speakthetruth3684 always getting some error paython

@consolemods3271 5 месяцев назад

@@speakthetruth3684 Bro 1 small Question why does it not always save,, the calibration,, if you do the calibration with the battery connected work perfect once the controller dies or the battery is remove the calibration is lost.. if i do it with no battery calibration it wont take effect.

@speakthetruth3684 5 месяцев назад

You need to change change the flash memory to permanent, then do your calibration and then set the flash memory back to temporary @@consolemods3271