Punisher remix of the RS-X-BOW "GOVERNMENT - 1911" 

Hi Vivek available here: drive.google.com/file/d/1N69mXiiGH9Zj3MGpYz33ZEg2otahthZe/view?usp=sharing

Hi Ulung, yes the tubes are neater, I've been making them for a while so I find them easy to construct. In one piece as a loop they are easy to take on and off the bow. Swapping between different strength tubes is quick and simple. The loop passes under the front of the bow with a longer working piece of rubber resulting in a smoother draw pull and more even power release. Currently printing a modified version of the Aderini magazine which will allow me to do something similar with it. Will post a video once complete.

@@slingbowmk.l3114 Change to an 8mm steel ball version, which automatically resets after pulling the handle. I think this improvement is good!

​@Vivek Vs vlog 1 8mm won't do shit 2 any1

Video on making tube loops here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f7ZmWEbwIqU.html

Sure, there’s a couple of bottom rail options that can be used. There’s one mounted in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rn8_DEqu6q4.htmlsi=svZhg4yD7CSqg0Rm

Happy to hear and ideas!

You can get up to 235 x 235 mm out of Ender 3 Series printer beds. See this article for details on how to adjust in Cura: 3dprinterly.com/how-to-print-use-maximum-build-volume-in-cura/ .Should be able to fit all parts if rotated on an Ender 3 bed.

I've placed samples of the largest files here, if you want to check the size in your slicer: drive.google.com/drive/folders/1_LPTzz5xYEBB_9IsuNaDV9UzrzSCU08U?usp=share_link

@@slingbowmk.l3114 thank you, they do get sliced nicely, i will test print these two parts, if it gets good, then will purchase the full set from the store.

Good idea for video, which I’ll post when i get a chance.

Hi it can be setup with either tubes or bands. Best speeds are with crossbow limbs. The draw length is the main limiter.

​@slingbowmk.l3114 do you know of a band of broad head that fits. What would you say is the max strength of tubing you could use?

@@juststartsomewhere9089 Hi the magazine will take up to 162mm length bolt so Chinese ones like this that are quoted as 6.3 inch should work fine. www.ebay.com.au/itm/314232461711?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=gubuRXZKRey&sssrc=4429486&ssuid=ZVIGLQWvS82&var=&widget_ver=artemis&media=COPY I’ve tried up to 3090 rubber but I found beyond 3080 while the draw weight increases significantly there are only minor increases in speed with the short draw length being the limiting factor. Best speeds are with the crossbow limbs upgrade! Regards

Hi Scott, unfortunately not legal from where I live!

@@slingbowmk.l3114 were do live am on uk

What if we send each other agift I send a gift of cash u send me a present 🎁 lol