I like how a lot of engine builders use clean rooms with air filtration to ensure no dust or nonsense gets in their fresh builds. Then we got Kyle & Wyatt pressure washing a block in the driveway, filling the block with straight up sugar & glue, and assembling it on the floor with cardboard to pull out 800hp.
The big difference is when you’re building your own engine. I’ve owned my own businesses in the past(not building engines) and I always was way more relaxed and not as OCD over every detail when I was doing something that was mine. If you’re a good person you’ll always want to exceed your customers expectations although there are quite a bit of business owners that could careless about their customers.
@@sukmidri well then you haven't been here very long the hatch has made it years and tens of thousands of miles at a high horsepower five times what it was meant to be and the other stuff they are just pushing away harder than it is meant for if they just used it for typical builds like the average person they wouldn't blow up at all but they need content for RU-vid so they have to push it.
That's just for peace of mind it's completely unnecessary and 32 years I've never had an issue without a clean room build at least 20- 25 engines the reason they have failures is because they're pushing their stuff beyond what it's rated for for better content and personal bests this time he's doing it the right way and building bigger before he completely blows it up
Yo easy to see how much wyatt believes in kyles driving...and how much kyle believes in wyatts skills...good to see friends like that these days...awesome
Even better would be to wire the cars better so there aren't shorts in the system. There's no reason for every single battery they put into any of these cars to just die.
When that one no longer holds charge you can simply just order a replacement battery it's way cheaper than buying a new unit. Really enjoy this channel keep up the great work
💯!!! This video truly shows how FAR you've came! You my dude! Are straight kicking ass, learning more daily. And the content is very informative and that is what is separating you from other channels.
Kyle, grab a steamer (a hand held one like the Bissell) and blast the rowdessy interior. You'll be amazed at how much junk it'll blast out of the seats, door cards and headliner!!
Thats litterally never going to happen, wouldnbe smart for some car detailing and cleaning channel to reach out and offer to do it for free for the exposure tho
@@beereadyyy9849 those Vargas bros eat rods for breakfast when they show up with their FC RX7. But after seeing just how thin those stock J-series rods are, tbh I am surprised they didnt explode as soon as they got within 100 feet of the burnout pit lmfao
Ohhh snap! Almost at 1 mill!!! Great job on all the hard work and keeping your head up with the hard breaks! You all are an amazing family that keeps on going. From Scootter.
The banter between you two is just so damn good. Love Emilio, he's a really great person but Kyle and Wyatt just seem to bounce off each other so well, not long until 1M subs and well deserved.
The explanation for the epoxy support was great to hear I've seen it on a few other videos and never knew how it worked or what exactly it did, been waiting for someone to explain it like that
you could probably find a car detailer that does youtube in Florida maybe see about doing a collab because i know itd be mad satisfying seeing the van cleaned professionally
Good to see y'all back -n- building. Being from FL. myself, I think I noticed the sugar is from Walmart. lol 😂 can't wait to hear it run as well as burning the tires off of it. At any rate, I'm sure you'll make it to Indy, and best of luck there. Have a safe and uneventful (bad) trip, and will be waiting for some content. Peace brother ☮️ 😎👍
Glad you got a new motor, rip tailgate cables. Yall Brave. Love the epoxy idea, those poor stock pistons are in for a full show for sure! Love the videos!
Kyle: you know we're trying to step it up post more and be more legit on the builds Also Kyle: you know what guys we haven't posted in 5 days because the jump box we ordered from Amazon hasn't come in yet
Also, I've heard of Chris Boyette for YEARS. He's the pioneer of epoxy and makeshift blockguards! He's owned some serious Hondas and Honda powered cars.
Master J series tuner and the epoxy setup can be better than a real blockgaurd when done well. Allows a tiny amount of movement and doesn't expand like a real one, at least that's what I think I heard him say years a go. Must have been at the top end of tuning certain Hondas for over a decade now and a bit of a legend to say the least.
How to clean your van seats without having an apolstery shampoo rig. I used to work at a scrap yard. We would pull the seats out, give them a quick rinse with the hose, get them damp. Then spray them with simple green, let soak for 5 to 10 minutes, then hit them with a pressure washer. Fricken amazing how much better they look after. Many times they come out looking new. Then just sit in the sun to dry. Works a treat! Keep up the great content fellas.
Will be interesting to see how the sleeve supports hold up. people used to do that with Jb weld using the sugar trick to make it all level. I think theres a video of some dudes testing it on their car and the jb weld failed pretty quick
You know you're supposed to recon the rods after you put ARP hardware in them. It causes the big end of the rod to deform with the higher clamp load. Didn't know if you guys knew that. Not telling you what to do. Keep up the videos i love it.
I've been looking to see if anyone told him this. I hope they weren't waiting on a jump pack to start cars. I'd be disappointed if he was and didn't just go buy some damn batteries and trickle chargers to solve the problem
Well, I know you guys are busy and no matter how long it takes to return, "BoostedBoiz" for life and the content, commentary, and videos are definately worth the wait. So, keep on truly rocking that sh.. and awesome work on all the BoostedBoiz vehicles. Oh, the minivan is really a channel favorite and needs a paid for interior detail and "stop the faking!"
Hey, my J32A six speed manual swapped CG1 Accord with a GTS3582 makes 500 whp on 10 lbs of boost and it hauls SO much ass. I LOVE it! The S14 should be a major contender!
I hope you, Kyle, are going to continue drift the s14. Cus I've been really lookjng forward to you doing some drift events and it would provide more content between drag events lol
When you said Larry was going I thought you were bringing the lizard Larry and about to set some speed records for his scaled class. One Larry is fun, but two, now that’s a party! 🦎
How do y’all like the Florida humidity levels? I know central Florida isn’t as bad as south Florida but y’all better get ready for summer it gets hot!!!!
I rejuvenated my $250 Snap-on jump box with the $38 battery from Amazon. Take your trustee screwdriver and open that jump box up and you'll find it's the same battery that's in a kids Hot Wheels electric car. You got this man!!! Save the OG jump box.
How fucking awesome it must be for the fedex driver. Pulls up to a nice ass place, see’s a garage full of race cars. And then boom, Kyle from FUCKING BOOSTEDBOIZ!!!!! Shits crazy
You can install a new battery in the jump fairly easy. No need to wait for a new one, just fix the one you have. With your track record of needing the jump pack I would suggest to rebuild the old one still.
Hahahaha maaaaan I just had to stop the video after that lil line in there haha comparing rods " you vs the one she told you not to worry about"😂😂😂😂😂😂 hahahaha love it 👌👌😅
Chris boyette is the man🔥 been following him for years, he's crazy with the j-series, he did a lot of hard work doing his own R&D on them, the guy deserves way more recognition when it comes to j-series
those Vargas bros eat rods for breakfast when they show up with their FC RX7. But after seeing just how thin those stock J-series rods are, tbh I am surprised they didnt explode as soon as they got within 100 feet of the burnout pit lmfao
You should take the stock interior bits and reupholster the Kirkeys with the interior trim for extra sleeper points. I may or may not have considered it for my car lol
You can replace that battery easily and fairly cheaply if you want to make the old box into a good backup unit. I did similar to one of my favorite older jump boxes and got several more years out of it. They use the same sealed batteries that computer UPS units use and there are many cheap on eBay and Amazon if you figure out the battery number and look it up.
HELL YEAH MAN, If you go LS Swap , go FWD out of a 06 Monte Carlo SS and build another van or MR2. Keep up with the amazing content and Florida man stuff lol.