Putting New Parts On This Rusty 1959 Chevy El Camino! Plus a Special Family Trip and an a Unboxing! 

Never forget family time trumps garage time. 🙂 great job and keep up the good work.

Looking good!

Going to be a nice ride when your done. County fairs are a blast and give you memories you will have for the rest of your life

YES SR, it's going 2 B A BADASS friend THANK U 🇨🇷🐺🌕🛖🌋

love the editing montage around 19 minutes in, she's coming together really nicely dude

Hey Jason of course Jesus loves you. Your restoring a 59 El Camino ! He has one too. Air bagged with a 50k dollar paint job. He rides around LA some nights cranking Low Rider ! Peace Buddy 👊😎👍

Great video! Here for the build and experience but it was great to go to the fair with the family. You think that was expensive, my family had 9 kids! I have fond memories of the family and good times! Now back to the Bionic build! 😉👍👋🇺🇸

work hard, play hard! That's how it's done! The parts are looking nice and coming together well!

Looking so good . Great time at the fair. The kids will remember that for a long time. You got to have play time.

Great work on the front of the old Elco. It's looking really nice. The fair looks like a blast. The new face shield should be a great addition to the shop safety inventory. Look forward to more. Be safe and stay well.

Really inspirational for me..glad I've discovered you're channel..cheers steve uk

good luck & use it pal

Coming along 👍 Thanks for another , Brother !

Built a lot of the old chevys, can’t beat real iron 🥰 love them videos keep um coming 😎

The suspension is looking great! I had to replace the driveline center support when my 60 El Camino was only three years old from new. The rubber went bad, and the driveline started vibrating under load. It's been a lot of years ago, but I think after you get the center U joint apart there is a center bolt that holds the yoke in place then you can get the support and its bearing off.

Wow, the county fair brings back soo many childhood memories for me !

Great to see you back and your family at the fair enjoying life 🙏🏼

I like the wall art... Good way to keep you sharp (see what I did there? Haha!!) Safety Third.... The carnival looked like a blast!! Thanks for taking us along Love watching this car come together!! Cant wait to see what's next!!

Well I am relieved that you were not seriously injured by the runaway grinder. That would have been awful to say the least.

Keep it coming ,great content. Hello from Birmingham England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

Great video and great work as always. I love getting the notification for a new country boy gas garage video. Instantly makes my day better. Maybe someday my channel will be as cool as yours lol. Awesome videos man

A can of Raid will get rid of em.

I get to be the first view....LOL

🕸🕷🕸🕷🕸🕷🕸🕷🕸🕷🕸 RIP Hummingbird It's worth every penny to go to the fair--your kids are gonna have have happy memories.

When I was a little boy and my dad had a 59 El Camino parts car and he was taking the rear end out from underneath it, I remember watching him work and him telling me. If this Jack fails and the car falls you run and go get your mom LOL well. The Jack failed the car fell and he curled up like a snail where the spare tire should have been LOL I took off like a shot yelling for my mom. He didn't get hurt. anyway Just wanted to say hi. I'm up here south of seattle. Ive got 3 59 El caminos two are parts cars.Who knows?Maybe I have something you need.Good luck with your car. Found your channel through one of your yellow bus videos.That was a pretty amazing feat!

Cars coming along great Jason. I’m looking forward to this build. 59 El Camino are just cool. Have a great week. 👍😎✌️

Man, you are on a roll (pun intended) with prepping that old Chevy to be a street rod! I assume that you intend to transform the 59 El Camino into a street rod? Anyway, I enjoy seeing the progress you are making in each video. I'm glad that you and the family had a good time at the fair. Family time is essential to ensure a strong and happy family. God bless you, my friend!

If you are looking for some parts check with Iowa classic cars

THAT WAS SOME NICE DETAIL WORK, THAT FRONT SUSPENSION YOU DID A GREAT JOB! CRAZY PART ABOUT THESE EL CAMINOS, ARE THE PRICES OF THE PARTS. LITTLE BY LITTLE THEY START ADDING UP! I INJOY YOUR CHANNEL, NO HALFASS WORK! NEXT THING IS TO DETAIL THAT ENGINE, FOR A NICE ENGINE COMPARTMENT! AND MAYBE JUST LEAVE THE CAR, WITH THAT FADED PAINT LOOK. AND THEN COMES THE ENTERIOR NICE SIMPLE SQUARE PATTERN, AND DOOR PANELS TO MATCH. THE HEADLINER YOU CAN ORDER THAT WITH ORIGINAL LOOK! WELL TILL YOUR NEXT EPISODE, JUST TAKING YOUR TIME FOR A GREAT FINISH. THANK YOU!!!! ADIOS....

💗

It's looking good Jason your doing and awesome job can't wait to see the next video

You are doing better than me. At least you have a roof over you. All i have is a gravel driveway.

Great work as always, good to see a nice balance between the shop and family time.

I can’t wait to see this project completed 😁😁👍👍

Great to see you going back together,with the Car. I have one of those Face shield's. Works great I had the money I would send you a Leather Apron. They are great for welding and to protect your skin. from Grinding. The best I can do at this time is to like and share. All my very best.

That thing is going to drive like a new car! Loving this build. Thanks for the shoutout! It's about time for fair season here also!

Hey man thanks for using my last comment and hanging that shirt on the wall. Very cool meeting your family and can't wait to see ya'll cruising in the El Camino. This channel rocks dude LIKE BUTTON SMASHED!

Nice job with this part of the rebuild. Don't be surprised if they send you the wrong lower bump-stop (with a single bolt attachment) .... I had to order my lower bumps from a corvette distributor (way cheaper too) Good Luck, Bro!

try shop vac under there 1st then see what you have .

Face shield Perfect ! Now hang Andre's gifts on the walls .Cool!

Lotta progress. It's great seeing you do the work. Really teaching others how to do it.

The ole Elky is comin' along! Love the lil' family outing added to the video!

When you wear that bionic shield, I wouldn’t tie your beard up that beard saved your life last time !!

That new face shield will make you look like a future spaceman mechanic from the future.

Looking great! Keep up the good work!

Hey Jason, good video, your making great headway, good day at the fair seeing your kids on the rides makes me want to get the Dune Buggy out and go for a cruise, looking forward to the next video, have a great weekend and catch you soon 😀😀

She's comin' together Brother. Wonderin' about those rear footwells. You plannin' on fabin' something? Or looking to salvage something from another '59 body? Seems like salvage would be the easier course. Lookin' good either way. What y'all feedin' those little people? A couple more years and your little girl will be as tall as her mamma. Lol!

The dark and murky spider haven,wow they all migrated to a semi safe spot. great videos.

The El Camino is coming along nice, making it safe with all that new front end. No stopping now I will be following this build. Always liked the 59 El Camino and at one time I had a 1960.

Did you install the lower ball joints upside down? The lower spindle arm is supposed to be on top of the lower ball joint, on top of the lower A- frame, if I'm not mistaken.

Nice Video Jason, Coming along great going to be a nice ride for sure 👍 Yep got to love the oh County Fair glad you guys had a good time 👍 And that's a cool Shield 👍 Have a good one Bud 👍✌️

Doing a brilliant job, certainly getting it done and done well, glad it was brilliant weather for the show and that yous were able to have a blast, thanks for sharing, all the best to you and your loved ones

Just found the channel and its fantastic 😃Keep up the great work❤

Am I seeing this correctly or are the lower ball joints upside-down

does anyone else cringe when front end parts are put together without anti-seize, or is that just a Canadian thing?

Nice job as usual. It's coming along very nice.

is the BIG man afraid of little bitty spiders LOL

Happy for u

Looking really really good Jason! And what a wonderful family day out at the fair! You must be so proud brother👍😁

Been looking forward to watching all day!

Cool. Is that a 283? Or 327❤ wow what a fair!!

Glad to see a other video looking good 👍

The rat rod truck sitting your garage is a jeep truck

Muchluvbruv🤘🏼🍑 🤙🏼

Where can I get me a Nova T-shirt?

Great to see you in motion wonderful forward movement!!!!!!

I thought the was country boy gas garage not city boy gas garage get under that car and go to work Lisa 😂😂