Q&A | Purfling Depth, Instrument Glue Recommendations, Mold Making and More!

Подписаться 23 тыс.

50% 1

In this episode of DIY Guitar Making, I answer YOUR Questions!
Questions/Topics:
- hide glue vs. titebond
- fish glue
- how deep should purfling be inlaid?
- inlaying turqoise
- The "Best" Guitar show
- Using waxed wood strips like Teflon strips
- Top thickness
- french polishing and tru oil
- fastening latches to molds
- the neutral zone for a dual action truss rod
🔴 All episodes available at diyguitarmaking.com
🔴 Register for a 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: www.ericschaeferguitars.com/l...
🔴 Check out the online course "Building an OM Acoustic": www.ericschaeferguitars.com/c...
🔴 To commission an instrument from Eric: www.ericschaeferguitars.com/i...
🔴 Check out the Radial Rosette Maker Jig: www.ericschaeferguitars.com/t...

Хобби

Опубликовано:

21 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@jonahguitarguy 3 месяца назад

I use the StewMac fish glue for everything guitar at this point. Pretty much the same thing as HHG without the hassle. In regards to the truss rod it's most likely in neutral and will likely vibrate if you tap on the neck. It really should have some tension on the rod in the tightening direction. As Eric mentioned it can be just bumping into that engaged spot to keep it from rattling. To be set properly it probably needs even a little more than that.

@juliantaylor7663 3 месяца назад

Thanks for mentioning my comment In your video. I’ve never had anyone mention me or a comment in their video Especially in my favourite topic So thank you

@thepragmaticluthier 3 месяца назад

Teflon strips are readily available at Stewmac

@short6691 3 месяца назад

Lucky Jerry to have a private session!

@walterrider9600 3 месяца назад

thank you Eric

@dalgguitars 3 месяца назад

I have not used the LMI glue. But I think it phosphoresced under black light so you could see where it was before finishing over it. I could be wrong.

@rayhodgson9055 3 месяца назад

Soooo, I read a rumour that LMI’s yellow wood glue was relabeled Wilsonart 30 yellow glue. Wilsonart has the glow under black light as did the LMI glue. Have a google and you can make your own decision.

@NickGee1000 3 месяца назад

I am currently building a jumbo with turquoise trim. No pictures handy--sorry. Turq rosette, turq diamonds as fretboard markers as well as on the headstock and possibly on the bridge wings. I'm thinking about turq/silver Paris eye dots for the bridge pins and the fretboard side markers. Purfling is red/white/turq fiber that I had to make myself. I got the reconstituted turquoise from LMI. I haven't found another source for it now that they're history. Any hints?

@dalgguitars 3 месяца назад

Somogiy uses hide glue on his bridges.

@Rileyinfo9 2 месяца назад

I personally find titebond more reliable to take apart. It always comes apart at the same temperature. Hide glue either delaminates too easily or won't come apart easily for me. YMMV, but hide glue I find very inconsistent. Titebond seems to have a consistent, predictable recipe that I find only slightly harder to take apart than hide glue at it's best.

@EricSchaeferGuitars 2 месяца назад

I addressed your comment in a new Q and A episode: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wQK59eKRTnk.html