Qidi X Max 3 Unboxing and First Review - 3D Printing POWERHOUSE

Подписаться 270 тыс.

Просмотров 22 тыс.

50% 1

Pre Order your Qidi X Max 3 here: s.zbanx.com/r/WnsUztTKQti8
Thank you for watching and don't forget to subscribe!
We hope you enjoyed our first look and impressions of the new Qidi X Max 3, which definitely impressed us more than we were expecting and we can’t wait to bring you some HUGE projects with this printer very soon.
Qidi did supply us with this printer but on the basis that we gave our honest opinions during our review.. which we hope you found helpful!
For more Play Conveyor videos and 3D models you can find us AND our designs below ⬇️
LATEST DOWNLOADS & COMMERCIAL LICENSE TO SELL OUR PRODUCTS:
💾 / playconveyor
🎥 RU-vid - © / @playconveyor
📸 lnstagram - / playconveyor
🎙️TikTok - / playconveyor
🙎‍♂️Facebook - / playconveyor
Print More. Play More.

Наука

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@cjwelcome6104 Год назад

if bambu labs made a 300^3 or even 350^3 printer they would take over the market. I for one would drop 1500-2000 easily for one of those. I cant wait for that day and i hope its sometime this year

@coryturner9140 10 месяцев назад

If their customer service didn’t suck so bad…. Qidi has the best service in the industry and they don’t repair parts, they ship new ones quickly if anything breaks.

@fivepointeightnate 4 месяца назад

Same here. I bought a QiDi Max3 because I couldn't wait.

@Lobesanft 3 месяца назад

Referring to the latest official statements from bambu they still don´t plan bigger sized printers than the x1 carbon so they literally stuck at the 256 mm square print size. I got the X Max 3 myself and used to print with the reality Ender 5 plus for bigger prints before - but even with some optimization as Bondtech extruder among other things the print quality was still average (in the best usecases) and 4 times slower than the Qidi. Otherwise the Qidi does not reach the quality of my Raise 3D IDEX which has - to be honest - a complete different prize tag an still is much slower than the Qidi.

@tjhuntog Месяц назад

Dont be an "apple fanboy" lmao. There are much better current released large volume printers like the Kobra 2 Max (it makes flawless prints) Bed leveling is amazing. Does a larger volume than bambu will ever produce.

@st0mper121 Месяц назад

You do know that anything you do on a bambu printer gets sent to them. any gcode any stl everything you put in that software. You can not do anything that requires a NDA. If you are serious about doing prototypes and dont want others to have access to your design you are not going to want to do it on a bambu printer.

@peipizhang0802 Год назад

This is so cool!!! Looking forward to showing more work😘

@playconveyor Год назад

Thank you!!

@UnixCondora-626 4 месяца назад

I just ordered the Qidi X Plus 3 and it is amazing, it's so incredibly fast and prints well

@dmax9324 Год назад

Thanks just subbed. I'm curious about firmware. If it is running klipper and has fluid access, are you able to change config file? Can you do things like add ABL/auto purge that only does probing to the size of the object instead of the whole bed? This is easy to do with stock klipper on any machine. Im hoping you can still manage macros and change config for things like this. Thanks!!

@rustyv6274 11 месяцев назад

I know on my other printers i put a longer petf tube coming out the side but does this one have a box you have to load it into? It was only shown for a sec

@user-ng9yd8fz1i Год назад

You are a legend

@johnslugger 5 месяцев назад

*I put my QIDI on a store-bought ball-bearing turn-table screwed on to a 18" plywood sqaure also bought at the lumber store for $25.00 total / Now I can spin it around to the rear easily.*

@brucewilliams6292 10 месяцев назад

SO, is if you only get one, Qidi Max 3 or the Bambu X1 with AMS? Thanks for the video.

@zhangfreya9817 Год назад

Very cool 3d printer

@magnusmelander5758 10 месяцев назад

How does it compare to Bambu Lab X1-C? Is the lack of sonar a deal breaker, or does it manage without?

@RathOX 7 месяцев назад

Im stuck on P1S vs this or plus3 vs k1. Also they made a camera for this and ams coming soon.

@tang2006 11 месяцев назад

What software do you use to prepare the files to add supports and everything?

@hugeslacker Месяц назад

I've had an x-plus since it came out and I love it. It's a workhorse. If this is the same build quality as my x-plus, it's worth the money.

@zaxy1k910 Год назад

This printer is giant bigger than my x1c I also like ur humour tbh

@playconveyor Год назад

It’s insanely big!! I’m falling in love with it!

@usurpinesusanti3149 Год назад

At least you printed something other then PLA, because that is why i want to buy this printer, to use high temperature abrasive filaments. I would like to see more prints with that and the hardened nozzle. And why you set the chamber temperature to 50° and not to 65° which is the max possible temperature, every Kelvin counts ?

@playconveyor Год назад

Thanks for the watch! Yes definitely, since we’ve had it it’s basically being used to print TPU, ASA and Nylon, so far it’s not failed once and the results have been excellent! The 50c was just to save a bit of energy, even though would be very minimal saving, I’ve found ASA prints fine at 50c heated chamber… especially the Filamentive stuff!

@usurpinesusanti3149 Год назад

@@playconveyor Which is the strongest ? Polycarbonate ? Most are blended anyway and should be possible to print with the qidi x max 3.

@DaveBeatz 6 месяцев назад

the filament loading system had me stumped for about 15 minutes. ive never used a 3d printer before and we got this one at work so i set it up.

@MetallicMelon Год назад

That is a big printer 😅 I also felt the filament spool holder… over engineered spool holder needed!!

@playconveyor Год назад

Oh definitely… an excuse to get on fusion again! 😎

@kyky7kyle7 Год назад

I'm sure an extender can be made to top mount

@playconveyor Год назад

@@kyky7kyle7 yeah definitely some post design work to be don’t by us in next couple of weeks for the spool holder!

@gothicm3rcy426 Год назад

actually smaller in size than the original xmax

@davsyl94 Год назад

I just setup my x-max 3 a couple of days ago...I contacted support asking what type of filament was sent...they responded it's their rapido PLA

@playconveyor Год назад

Ah makes sense.. it printed really well in fairness! Seems to keep up with the speed! How are you finding you’re X Max?

@davsyl94 Год назад

@@playconveyor This is my first 3d printer and so far I really like it...I just wish there was an actual manual for it besides just the quick guide. Thanks for making this video...I now know how to clean any jams in the extruder... I didn't have any issues like you did. Yes I do think the filiment box on the back sucks. I bought some bowden tube and I'm going to try with the box next to the machine...not sure if that will work...

@kyky7kyle7 Год назад

@@davsyl94 is online under support

@gothicm3rcy426 Год назад

you can add a camera yourself.... theres a usb on the motherboard for it... qidi has a video guide on installing one ... its really easy. also regarding the filament.... put it at the rear side inside the dryer box.... not on the back. btw, the dimensions width and depth is actually smaller than the og xmax... which had a smaller build area

@steveh8724 Год назад

Could you post a link to the video guide on cam install? For some reason I didn't see it...probably just missed it.

@RathOX 7 месяцев назад

@@steveh8724just grab the camera and it comes with instructions

@D1idiots 8 месяцев назад

Nice video title

@darrengurney9265 Год назад

Manual leveling???

@playconveyor Год назад

Only for the first calibration… then auto levelling! I can’t make my mind up on in.. one hand it’s inconvenient, but on the other it means I can dial in exactly how I want my first layers to be..

@punk6119 3 месяца назад

As soon as I seen that paper gap check I was done lol. I'll wait for bambu to make a bigger model.

@jamierichards925 Месяц назад

isn't it just for first initial level setup for calibration you never need to do it again ya sook lol

@punk6119 Месяц назад

@@jamierichards925 I've only seen people have problems with these since I said this 2 months ago. These things are garbage.

@D1idiots 8 месяцев назад

Nice thumbnail

@tbip2001 9 месяцев назад

Havent had a printer for a while . I found them too frustrating. I guess the question for me is, why does a printer in 2023 still have problems like the layer shift that needs the butter to go through customer support and mess with stuff?????? Its frustrating

@zephyrosify Год назад

Needs multilcolour to be competitive tbh

@playconveyor Год назад

It’s a really interesting topic is multicolour 3D printing.. I’m not convinced it’s there yet because of the waste and time it takes! I’m still waiting for someone to come up with competition for the AMS!

@zephyrosify Год назад

@playconveyor yeah it does take look long and I was hoping the prusa xl was the solution. But the printer seems so slow also :(

@kyky7kyle7 Год назад

Xmax3 ams from qidi is coming soon.

@Heiserton 11 месяцев назад

It really. Multi color is still a bit of a gimmick. It wastes an incredible amount of material. Unless you’re doing an IDEX setup, single extrusion multiple color prints are a huge waste of time and filament.

@Horsenb 10 месяцев назад

It depends o what you want from a printer. I want speed an quality. And build volume is way more important than colour changes. Ams is awesome but its not a deal breaker for me.

@tjhuntog Месяц назад

looks like a toaster oven though lol

@user-ng9yd8fz1i Год назад

Is so want a reply from this guy

@playconveyor Год назад

👍🏼

@user-ng9yd8fz1i Год назад

Thanks so much!!!!

@user-ng9yd8fz1i Год назад

My dream = Meet you

@once-over4243 10 месяцев назад

Yes it does atleast that's what my ex told me 😔

@odinata 4 месяца назад

"Qidi" pronounced as "Chee Dee"?

@dejedejsson Год назад

"It looks nice, I think it's a smart looking thing" How much did you get for saying that!?

@playconveyor Год назад

We only ever do reviews where we have full and unbiased control over the content… which Qidi were more than happy to agree with, which was really refreshing to see from a company! It’s the only way to give value to you guys and the company… We think it’s a pretty cool looking machine.. what do you think?

@gothicm3rcy426 Год назад

looks great to me.... and im not getting a thing. but then again... i have 3 qidi machines, theyre reliable workhorses