QUICK TIPS: Plastisol Cooking for Better Success

Подписаться 105 тыс.

Просмотров 20 тыс.

50% 1

Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE

Спорт

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@WorldsWorstFishing 3 года назад

Thanks for watching quick tips, proper plastisol preparation is the key to lure making success!

@FRENZYTACKLE 5 месяцев назад

How can get the bubbles out of my plastic

@V-L0-4 3 года назад

loving the quick tips.

@Jerry-xx8dx 3 года назад

Thanks Chris, keep these going these are great tips for us thinking about getting into bait making

@WorldsWorstFishing 3 года назад

Absolutely

@alexdockrill 3 года назад

I love this quick tips thing!!!

@WorldsWorstFishing 3 года назад

Thanks Alex

@russellerney2375 3 года назад

Quick tips are just that. I like the idea. Well thought out and explained. Nice job and thank you.

@WorldsWorstFishing 3 года назад

You're welcome

@frankhunt5018 3 года назад

Great idea, this would be a great way to do The Color of the Day. A quick stand alone video that we can watch over and over and over again.

@WorldsWorstFishing 3 года назад

Yeah

@BacklashTV-gu3rc 3 года назад

The best soft plastic bait maker on you tube. Thanks for the info

@WorldsWorstFishing 3 года назад

Yessir

@johncox5681 3 года назад

You did it again! Thanks for the tips.

@WorldsWorstFishing 3 года назад

💪💪

@jamesgray4028 3 года назад

Thanks Chris that was very helpful!

@WorldsWorstFishing 3 года назад

My pleasure

@teamfishlineswfl9099 3 года назад

Chris your info is amazing . Would really enjoy speaking with you some time about the biz side of things .. I also have kids (3 girls) and work full time but think about adding to my side gig in fishing...

@jimcoleman4558 3 года назад

Quick tips great content. Slow and steady!

@WorldsWorstFishing 3 года назад

👌👌

@basscatlildave 3 года назад

Great tips we all need reminding of the basics.

@WorldsWorstFishing 3 года назад

Absolutely

@Dudeman2056 3 года назад

Can you make a video detailing the shipping/sales end of things? I.E.: how to calculate how much you should charge for baits, best method for shipping etc. Thanks 🎣

@redelfoutdoors9668 3 года назад

Great vid! Great info!

@WorldsWorstFishing 3 года назад

Thank you

@adamservice369 3 года назад

I can’t wait to put your tips to use thank you again

@WorldsWorstFishing 3 года назад

Yes sir

@williamharkenrider3842 2 месяца назад

never seen a bad video from this OG watch and learn if you want the subscribers thanks Chris the world's best fisherman 👍😎👍

@BigBaitsBigFish 2 месяца назад

350° just Gona start makeing my own salt water ones thank u for ur video super helpful

@zacharythomas6134 3 года назад

These quick tips are nice

@WorldsWorstFishing 3 года назад

Thanks buddy

@arthurstrange3501 3 года назад

Great video! Learning by being slow and careful with each step. Thanks!

@WorldsWorstFishing 3 года назад

Definitely need to take your time in this hobby

@seanp9157 3 года назад

Absolutely! It pays off huge to take your time. I'd love to make soft plastics like he does. I've only made some hard baits thus far. I started wanting to make a nice swimbait for myself and had NO idea what it would turn in to. Anyways, taking my time to do it right, which meant alot trial and error as consistent info was hard for me to find, I ended up with a bait that swam great and eventually caught fish for me. I somehow only recently found your channel. It has been responsible for huge chunks of missing time in my life 😜 Thank you for sharing what you have learned and perfected. Not everyone does that. Some really regard lure making as a secret to be guarded, which is fine, that is certainly there prerogative to do so. That is why, what you do is so valuable. 👍

@mpavelka6294 3 года назад

The quick tips idea is a Good one.

@WorldsWorstFishing 3 года назад

Thanks

@CrappieJunction 3 года назад

Awesome!

@yuvrajsehgal8023 Год назад

Hii.. absolutely loved your video can you share the composition of the chemicals used in the plastisizer?

@jakenunes-mq1sc 3 года назад

These are cool little videos

@WorldsWorstFishing 3 года назад

Yessir

@tomary8487 Год назад

What kind of heat gun do you recommend brand and type. Thank you in advance and for all your knowledge

@scottscott3760 2 года назад

I have a 5gallon bucket of deadon and did mix it so when I have poured my open poor's 4" and 6" and pull them apart it's really soft so I need hardner to add before or after I heat it?

@ddd-ks2mt 3 года назад

Thanks Chris

@WorldsWorstFishing 3 года назад

Welcome

@sixeladel7275 3 года назад

hello, my name is alexis, i'm french. I make soft lures on a model that I made myself. I have a question for you. I hope you will have time to answer me, when I sink put a lure in pure plastisol without dye, while I have no more bubbles in my pyrex, my lure always comes out with a few bubbles inside, and sometimes there are a lot of micro bubbles. how could i remedy her? thank you your soft lures are beautiful.

@josephdisselkamp2586 3 года назад

Loving the tips! Do one on storing and remelting leftover pucks. I store mine by color in a bag with a silica gel packet to prevent moisture. Is that wrong?

@WorldsWorstFishing 3 года назад

Never heard of that one myself

@mattlepera9802 3 года назад

Did you add heat stabilizer to that plastic? Do you recommend it with new plastic or only remelts since there's a lot more unknowns? Thank you for all the vids and tips

@WorldsWorstFishing 3 года назад

No heat stabilizer necessary when using dead on plastic.. I do recommend it if you are remelting pearls or white

@Xfishf00D 3 года назад

Would 350 degrees be good for recycling plastics also?

@RedTroutandQue 7 дней назад

I always get a ton of little bubbles. Is that a problem and sometimes I get to the 360s is that ok or will it cause problems?

@cjbaits402 3 года назад

Quick Tip Question! Best way to clean your injectors??

@martybarnes9330 2 года назад

So you always add color in after it's heated?

@robertrenter5473 3 года назад

Can you do a quick tip on re-melts? I'd really like to know the best proces for that.

@atthebrink74 3 года назад

Go slow and stir often. Some of the older plastics will scorch easily. Maybe add heat stabilizer?

@kayakingwithkevin303 Год назад

How do i get rid of or reduce bubbles if i dont have a air chamber?

@johndedrick4619 3 года назад

Thanks!! Again, Chris, you've made a process easy for an old fart to understand!! Great video!!!!!

@WorldsWorstFishing 3 года назад

Well we aim to please lol

@heathmcdaniel9232 3 года назад

Mine takes roughly 3 & a half minutes to get to proper temperature but I get bubbles what can you do to get rid of bubbles with only a microwave

@loopster40 Год назад

Once you get it to temperature. Then you start adding colors and other stuff to the mix. If it cools down during that this time. Do you reheat it to 350 degrees? And how long do you cook it for?

@helotaxi 5 месяцев назад

After that initial cook to 350, it doesn't need to get that hot ever again. You only need it hot enough to have the level of fluidity needed for what you're doing with it. Dead On says you can pour/inject their plastics down to, I think, 280 F.

@gorilafishing4778 3 года назад

Could you add the colours and glitter a bit before reaching 350? And then reach 350 with everything ready and go straight to inyection? Thanks!

@helotaxi 5 месяцев назад

Once it starts to gel, the colorant and flake won't mix evenly into the plastic so you aren't going to know what the final color is going to really look like and you'll still need to mix it further once it's all converted.

@graysonstout6800 3 года назад

How long should I cook with a 1000watt microwave

@seanp9157 3 года назад

It definitely can be finicky! One time, I burnt some plastisol while making tails for my homemade, hard-swimbaits and accidentally came out with something really cool. I was making pink tails for some rainbow trout baits. I used a few different brands of chopped soft plastic worms, grubs, etc. One of them clearly ended up having a much lower melting temp than the others. So those pieces burnt as they came into contact with the bottom and sides of the pot. I poured them anyways and was really excited when I saw how they came out. Each tail was pink, but had random flecks of black distributed throughout each tail. Happy accident!

@WorldsWorstFishing 3 года назад

Never a bad thing

@Brobro449 3 года назад

Tips for doing this hobby to start without vacuum chamber?

@scottkidder438 3 года назад

I keep a cheat sheet on the side of my microwave, 2oz, 4oz, 6oz, 8oz, 12oz and 16oz. these are all set up for cook, stir, and hit the +30 second button to land in between 350 and 360. If you do this PLEASE keep in mind even the same brand same wattage microwave WILL have differences! I had to cut 5 seconds up to 20 seconds (depending on ounces) when I got a new one.... which would have fried my plastic if I would not have tested it first.

@WorldsWorstFishing 3 года назад

Yep all I can do is provide the best guide possible, it really has to come from experience

@joshuadavis8230 3 года назад

Good refresher. What would you say the minimum temp for joining skin pours is?

@WorldsWorstFishing 3 года назад

Well that's actually the temperature of your mold that matters

@joshuadavis8230 3 года назад

So... If your IR gun won't read your mold. How do judge?

@WorldsWorstFishing 3 года назад

@@joshuadavis8230 experience... I have several high-end pouring videos you can check out for reference

@caliberkinkade916 3 года назад

I always have bubbles in my plastic I can’t get them out any tips?

@jonathanbacon1825 2 года назад

You said the chemical reaction happens at 350 degrees but in you laminate video you say the plastic should be cooler, around 330 degrees. Are you letting it sit and cool down to get the lower temps for laminates or are you not ever making it to 350? Thanks for all of you info, great video

@WorldsWorstFishing 2 года назад

All plastisol compounds have to reach a certain conversion temperature, from there you can work with them at lower temperatures, they only have to convert once

@jonathanbacon1825 2 года назад

@@WorldsWorstFishing thanks again, i know i’m a pain but you have so much good info, old and new, i’m trying to keep up lol,

@hopalongjohnny9797 3 года назад

Love the video, but we need to see you “burn” some plastisol. I know I’ve made some lures where I’ve heated it up a little past 400 degrees and the colors still looked good. What is too high?

@WorldsWorstFishing 3 года назад

With a soft blend of dead on plastic you almost need to break 500 to burn it

@hopalongjohnny9797 3 года назад

@@WorldsWorstFishing Thank you, I’ve only been cooking for roughly a couple of months. So far so good! Love your videos!

@lucylu8854 6 месяцев назад

How long should it take for the bubbles to dissipate if we don’t have a vacuum chamber?

@WorldsWorstFishing 6 месяцев назад

Just a minute or 2

@lucylu8854 6 месяцев назад

Thanks! @@WorldsWorstFishing

@byronbrush9030 2 года назад

Sooo frustrating. I've tried over and over and can't get it to cook without burning 😩

@edwarddyski1732 3 года назад

Do you personally ever get mirco bubbles?

@WorldsWorstFishing 3 года назад

Yes for sure

@edwarddyski1732 3 года назад

So frustrating 😫

@Ronaldwhitehead-hu1rv Год назад

at what temp is over cooked ? \

@WorldsWorstFishing Год назад

Whenever it turns yellow...will be different for each plastisol

@TokyoJim618 3 года назад

I'd like to get some of those hand poured action worms.

@rybadnia 2 года назад

I always have air bubbles in liquid plastisol, I don't know how to get rid of them, I let plastisol cool down and some of them escape by gravity over the top, but when I boil again, they are still there, there are millions of bubbles XD

@tracynewman5246 3 года назад

👍

@WorldsWorstFishing 3 года назад

👍

@mre4875 3 года назад

Well Chris, these videos are great, BUT something just doesn't feel right. Ahhh, I got it, no beer, no drum rolls, no washing machine. That is why they seemed weird. 👍🍺🎣

@WorldsWorstFishing 3 года назад

Hehe