Race day Stihl MS391 vs Speedsaw E5 

Brad Clark In Europe it is 3 phase 400V 16A. and in the US is 3-Phase, 220V, 40 amps. The cut gets better with the electric saw, guess it's because the chain has a higher speed.

Jeffrey Beyer agrees that it would be fun to try. Im try and see if any friends have a big saw I can borrow. Both to get to do a race against my electric saw. But would be fun to see the difference in the sawmill between my MS391 also

Would donate my Husky 390xp for a quick run, but live in the north central USA.

+Jeffrey Beyer Gets a little expensive to send by DHL , I think. Must see if I can borrow a larger saw and test with.

Thanks

+mlkyllo Unfortunately I do not have such a long extension cord

This electric motor is much, much more powerful than the chainsaws engine.

It doesn’t matter, it’s over 2 to 1 boards with no effort

+Sirios Star hihi

+David Thorne Is not quite sure but it is between 12-15 hp, in Sweden we notice the engines with effect in kw only

How many KW? I've been thinking on building a mill and with my location at this house our backyards face each other and the other neighbors have complained to me about my buddy four houses done that cuts lots of fire wood making chainsaw noise... So the electric would work here where a gas engine wouldn't ... I'm glad for your video as not only do I now know there are electrics being made but I can now try to see specs and look at yours for the design...

Hey....Also, I see the twin (??? Bar Lube Jugs???) do they recommend a light oil? Regular bar lube? Or water? On mine I don't think I'd want to use bar lube because I want my boards for my house furnishings and shelves and whatnot????

+Matt Seymour I think it’s about the same.

+Matt Seymour i think it’s an the same

Yes more wasted but much nicer cut. so you have to plan more when it is sawed with band saw.

Plane

+Owen Johnson Yes it would be more fair. But at the same time, my electric saw (E5) is the smallest model of Speedsaw as Logosol sells, and MS391 is the smallest saw as Logosol recommend that you use

I've used my 461 on Grantsburg saw mill and it worked great. I also own a 391 and would never use it for something like this

I have a 9 horsepower solo chainsaw and 10000 rpm and it cause slow still because it font really have 9 hp in it no chainsaw have the right foot pound on it but a induction motor do so the motor win alway r u can get a 18 hp gasoline engine dat work at the same

My saw is a 362 and cuts pretty much anything you put Infront of it and very quick with a 15 bar on so think it would have enough hp

@@mattseymour8637 great saw, and the predecessor models were good as well, but for ripping, you really need 80CC or better. I had pretty good luck with an 056 super in red oak, but my MS441 struggled in green hickory of a smaller diameter.

In Europe every home have 3 phase 400v as standard. So normally not a big problem

På vilket sätt felaktig sågning med motorsågen? Nyfiken för jag har den uppsättningen

Han tycker att jag matade för hårt under filmen så motorvarvet på motorsågen sjönk för mycket.

@@Projectoftheday okej ganska tyken kommentar. Jämförelsen av sågarna gjorde du fenomenalt👍 Har sågat många stockar med 391an eller vad den nu heter så jag vet hur långsamt det går😅 man får känna av varvtal men matar man inte på rejält så kommer man ingenvart. Musiken i videon kunde du skippat🙃

@@neverlessdesign är 7 år sedan jag gjorde denna film, då använde jag bara gratis musik på nätet och den var inte direkt jättebra. Nu betalar jag för den så får betydligt bättre musik nu.

I don’t sale Logosol, but check there homepage www.logosol.com for local price

Why is electric more environmentally friendly?

@@69yenko65 because you need x times more energy to produce gas and oil until you have it into your chainsaw, insted you will use the electicity imediatly for the saw . I know, producing electricity is not clean every time. Producing batteries too. But i think Gas is gone and batteries can be charged many many times until you can recycle it. In europe to 96 % Sun is shinning every day and put much of ernergy on our planet. We only have to collect and use it. Im no green punk, i love my motorbike, but what i am able to do easily for our earth, i try. I work on my one lawn care service. I can tell you, if the wind does not blow, you will be in cloud of gas and you breath it. This is not healthy over a work day. MfG Dirk

Hi

Certainly there is a difference, many ask how much difference is there between my two saws. And here is the answer. And I use them both to cut boards, yes electric saw much stronger and more expensive

Its all about power and not dull chain. Gas saw is about 4,5hp and the electric you can push out around 12hp

@@Projectoftheday that saw would not cut butter the blade was to dull nothing to do with horse power

You don’t know what your talking about

@@jamesturner7728did you even watch the video? He changed both chains to brand new ones before the test.

Q2yes i did but was it a rip chain it did not look like to me@@MyGFIsMaria