Radiolink AT10 High dBi removable Antenna upgrade

Подписаться 1,6 тыс.

Просмотров 16 тыс.

50% 1

MY NEW BETTER SOLUTION 👉 • The ultimate antenna m...
In this video I show you how to upgrade the antenna on the Radiolink AT10 to a higher dBi one that attaches with a standard sma connector.
Links to items used:
2.4G 5dB Antenna RP-SMA
www.banggood.co...
100cm Extension RP-SMA Female
www.banggood.co...
Music:
Bonus Points - Laid Back [Creative Commons]
/ laid-back
How to build a fpv racing drone:
• How to build a FPV rac...
Want to know how a quad works? Check out components explained:
• FPV Race Drone compone...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@matb.2634 7 лет назад

Hey man, great video. I think that I will make this mode soon to my radio but I have two questions: What will happen if you turn on your radio without the antenna ? And how long was the cable that you soldered to the transmitter ? Thanks in advance, Matthew

@matb.2634 7 лет назад

DroneX Sweden Thanks man! If I make this mode to my transmitter I will probably carry the radio in a separate box to prevent it of turning on itself.

@43plank 7 лет назад

Thanks for the video friend. Could you tell me what is the maximun range you have reached?

@jeanclaudecusa6321 2 года назад

I saw your video and I have the same problem as you with the remote control antenna what kind of antenna should i look for for modification?

@dronexsweden6906 2 года назад

I used a 2.4G 5dB Antenna RP-SMA. Any antenna with those specs should work! You might also be able to use an even higher dbi antenna but it might also fry it.

@pacoxperez 7 лет назад

I did do it, but I attached a minor diameter wire, and I lost signal at 30 meters. Before I see you video I think that I used wrong wire. I will buy the wire that you say.

@logigustafsson 7 лет назад

Do you have the AT10 or AT10 II (2)? The reason I ask is the AT10 II (2) comes with a 7dBi antenna. So if you have used the same setup as DroneX Sweden on a AT10 II, you have downgraded the antenna output by 2dBi.

@dronexsweden6906 7 лет назад

I moved this channel to my brand channel which means all old comments from me has been removed. I'm sorry for the inconvenience.

@siniestrorave 7 лет назад

Great!

@jojak19 7 лет назад

at9 is tutorial same?

@superslug2516 5 лет назад

Does the throttle stick have notches??I mean when i move the throttle stick does it feel rough

@dronexsweden6906 5 лет назад

I don't have the radio anymore but I'm quite sure it did!

@superslug2516 5 лет назад

@@dronexsweden6906 thanks

@nateback796 3 года назад

Its a changeable part to add the notching effect.

@fatihsarduman6746 7 лет назад

Hello there. I have a new AT10ii and R12DS system yet. I bought it for my plane with nitro engine. I do not have an ESC. (no esc). I have one 2s 7.4v battery and one UBEC 6v device. How can I connect this battery to the R12DS receiver. from which port I will connect. Do I need to use UBEC 6v? will the 2s7.4v battery work on my connection? I will connect the battery to which channel. I will connect to which channel the numbers are formed with red color. Would you mark me with a photo and attach it to the message? Please.

@dronexsweden6906 6 лет назад

Hi, sorry for the late reply. Somehow this comment ended up in the spam section. The R12DS supports a input voltage of 4.8 to 12V which you can connect to the middle row or the pin labeled VCC. As for controlling the motor without an ESC is not something I'm familiar with so I can't really help you there. The receiver is capable of working in SBUS, PPM and PWM and my guess is that you are interested in the PWM signal where each channel is separated as I presume you don't have a flight controller on you craft. If that is the case the different numbers correspond to different channels on your radio which you can see in the manual I linked. www.radiolink.com.cn/doce/product-detail-126.html Hope that clarifies things, if you have more questions just ask away.

@dronexsweden6906 6 лет назад

For more information check out my video on receiver protocols ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RvagKFMT5H0.html

@dronexsweden6906 6 лет назад

Check out my better retractable antenna solution here! 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KGol1ymUHTY.html My old answer comments have been removed since I moved this channel to my brand channel. I will respond to any question usually the same day!