RadioLink AT10II and Tamiya MFC-01 Setup & Programming 

Welcome to Radiolink family!!!

@@Radiolink_official Thank you, but I'm not there yet. I'm hoping to try one out on my Channel, before I start investing. I've only used FlySky for years now, and have been satisfied. This does seem good, but I have to somehow try one first. 😉

@@CarminesRCTipsandTricks There is no problems, we really hope you could try to Radiolink in the future!😉

Looks like I may have helped :-)

@@HobbyconceptsLLC you did more than just helped! Your wisdom and teaching! Are truly a blessing to me! I'm grateful 🙏 🙏🙏🙏🙏💯💯💯💯💯💯💯👍👍👌👌🤯🥳🤩

First unplug the motor and then re-map the MFC to the control. hat should fix your sounds so the beeper is in revere. Then plug in the motor so it works the proper direction.

Back to front sorry

When you map the radio it should set up the stick correctly for sounds, so when you move the stick down you hear the backing beeper. If the truck then runs backwards reverse the 2 wires to the motor.

Great I’ll try that thank you so much

I have not checked that.

Hello, sir. You can bind AT10II with many receivers at the same time. And control them at the same time.

Double check that your dual rate switch is actually working using the monitor function on the radio. Then re-map. Make sure the dual rate switch is up when you map it.

email me. My email is in the description.

Setting up the SFR-1 does not requires dual rates with the transmitter. Setup is very different. Watch my Beier Masterclass series for ideas.

Yes, same setup works with the MFC-03. The MFC-03 has a few different features. Watch my Flysky MFC-03 video to see those in operation, the AT10 will work the same way.

Thank you bob good news my engine now starts up need to do a few tweaking here and there

Yes you can!

I have not tested it.

Hello, sir. Yes. You can bind lots of the receivers to AT10II at the same time. Just bind them one by one. When the receivers are powered on, they are boud together.

email me. My email is in video description.

Never turn off the transmitter when the truck is on. Turn off truck first then turn off transmitter.

Yes.

This video may help you: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-80I1naa2giQ.html

Hi, sir. Here is the way of how to reset AT10. Long press the MODE key to enter the BASIC MENU -> Rotate the scroll Dial to highlight the MODE TYPE option, choose the mode type needs to restore to factory settings, and press Push to enter -> Select RESET: Execute, Press PUSH key again as required, then show out “ Please waiting” and DEE sound. The factory setting is successfully restored after Dee sound disappears. Pls note it can only reset one model. If you want to reset all the datas. You need to reset each model.

Never have used Futaba

Watch my video on the Flysky and MFC

Probably servo interference. First you should only plug one servo into the MFC. Unplug any additional servos and then try it. Many digital servos interfere with the MFC so you might try an analog servo.

olá estou usando servos futaba 3003 fiz o teste sem plugar a iluminação e os servos, apenas os J4 a J7 no receptor, e a falha continua@@HobbyconceptsLLC

It will work with the AT9 as far as I know.

Si adesso funziona!! Con at9s pro il dual rate è a 125% quindi bisogna cambiare i fine corsa da 100% a 125% 👍

Glad you got it!

I haven't programmed an RC controller before and wanted to see if you could help me walk through how to program the light to function properly. I watched the video and still stumped which button should work each function