Radiolink AT10II 2 4Ghz 12CH RC Transmitter and R12DS Receiver Review

Подписаться 11 тыс.

Просмотров 19 тыс.

50% 1

The Radiolink A10II transmitter is a well rounded product with all the features you need without being over complicated. If you are looking for a new transmitter or just getting started this is for you!
🔗 Please tell me if any of the links provided no longer work!!
🛒 Radiolink AT10II 2.4Ghz 12CH RC Transmitter and Receiver R12DS s.click.aliexpress.com/e/_9ul5aT
🧾 www.radiolink.com/at10ii_manuals
🛒 Radiolink R12DSM R12DS R9DS R6DSM R6DS Receiver 6/9/10/11/12CH s.click.aliexpress.com/e/_9fw66K
🛒 Radiolink Byme-D Flight Controller Delta Wing s.click.aliexpress.com/e/_AN1GKR
🛒 Radiolink Byme-A Flight Controller Fixed Wing 4 Channels s.click.aliexpress.com/e/_9IXkmP
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from either bit.ly/_Banggood_ or s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook / 1nformatica
💲 If you would like to buy me a coffee: www.paypal.me/1nformatica
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica

Наука

Опубликовано:

21 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@MCsCreations 2 года назад

Really awesome looking transmitter, man! 😃 Great review! Stay safe there with your family! 🖖😊

@1nformatica 2 года назад

Thanks Mario! I think Radiolink is under rated, it's the equal of Futaba at much less cost! Keep safe!

@Radiolink_official 2 года назад

Thanks for your video!

@1nformatica 2 года назад

You're welcome! It's a great radio.

@MrJustS4 4 месяца назад

Thanks for the pairing method

@1nformatica 4 месяца назад

You're welcome! Have a great day!!

@alexj3709 2 года назад

Another well presented review, thank you. I am tempted by this transmitter but I have a mix of receivers - frsky in D8 and D16, flysky, radiomaster, even a couple of devo 6 channel. My Jumper T lite handles them. But a more comprehensive controller would be great it it is also flexible for the various protocols. Is this the case with this transmitter?

@1nformatica 2 года назад

Hi Alex, sadly it only supports Radiolink's own receivers. Best save up for a Radiomaster Tx16s or the slightly less expensive Eachine version. Thanks for watching, have a great day!

@Cormano980 2 года назад

I ordered one for my tank, should be better than the flysky i6 , will see when I get it and have time for installation

@1nformatica 2 года назад

_•:*¨¨*:•_•:*¨¨*:•_ EXCELENTE_•:*¨¨*:•_•:*¨¨*:•_!

@ChasingContours Год назад

Would this model support vario feedback and perhaps FPV with panning?

@1nformatica Год назад

If your going to want advanced functions I would go with a Radiomaster Tx16S running EdgeTx software. Thanks for watching, have a great day!

@bengoodman6112 Год назад

Thanks for the great video, could you please let me know how many 3 position switches this radio has? Thanks

@1nformatica Год назад

Hi, there are 4 x two-position, 3 x three-position and 1 x return switch the manual is linked in the video description. Confusingly in the picture from the manual the 3 position switches are labelled "Trinal" I guess a Chinese mis translation! Thanks for watching, have a great day!

@bengoodman6112 Год назад

@@1nformatica okay great thanks for your reply, I wanted at least two 3 pos switches, can you turn mixes on and off via a switch?

@1nformatica Год назад

@@bengoodman6112 Sorry I don't know. I only used the basic features to review. You need to read through the manual linked in the video description.

@Theoneandonlybaconator 6 месяцев назад

Hello ☺️ can you apply to switches to one channel ? I whant it to my truck, I need 12 channels, then for high low lights, I whant full on and off and the right switch whit a spring

@1nformatica 6 месяцев назад

Sorry I don't know. I no longer use this Tx, I use the Radiomaster Tx16S. Thanks for watching, have a great day!

@ChasingContours Год назад

Do you have the gyro on a switch? Or is it active all the time?

@1nformatica Год назад

The gyro is controlled by a 3 position switch on channel 5 giving manual mode, gyro and stabilised modes. Thanks for watching, have a great day!

@ChasingContours Год назад

@@1nformatica thanks.

@1nformatica Год назад

@@ChasingContours You're welcome! Have a great day!!

@ChasingContours Год назад

@@1nformatica whilst I’m here. Do you think a gyro is a good thing for a newbie or do you feel it detracts from the learning curve and perhaps fitted a little down the line?

@1nformatica Год назад

@@ChasingContours That is a tricky question! One of the "catch22's" of a gyro is that the plane should be trimmed to fly correctly before using it! It can act as a confidence booster when learning but not used all the time, kind of like trainer wheels on a bike. In the video the plane shown is one I used to test various gyro setups. The plane flew fine without it. Recently I maidened a 4 motor Lancaster : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9AM6t9kdA48.html It had a gyro but it was not used for the takeoff only to provide a stable flight for landing. In a large or expensive model it is an insurance but only if set up correctly!! Good luck with your flying.

@edsondeliz3655 Год назад

Hello friend, I see few recent tutorials about this radio, what you think of it is a good buy

@1nformatica Год назад

Much depends on the way you wish to setup the radio and models. This radio does not have a computer interface and all is done on the radio. Others like the Taranis have a program for the PC like Open Tx. I compare the AT10II radio to Futaba but much less expensive. It will only work with Radiolink receivers. It is a really nice radio. Personally I like the option to use my PC to backup and configure models. I have just bought a Radiomaster TX16s running Edge Tx, but obviously it is much more expensive. Tell me if you have other questions. Thanks for watching, have a great day!