Ram 1500 Backup Camera Installation 

No problem!

jd turbo so the reverse camera comes on so it’s getting power, the radio switches to the back to view so the signal is getting to the radio to switch, I have the yellow rca to the r.cam input but it’s a blue screen that says no signal. Any idea?

jd turbo also what did you end up running to that green and purple reverse wire

I think green purple wire is power for camera. So when you put the truck in reverse it signals the camera to come up on the monitor.

Yes you will get that message on your dash because your trailer connector is getting power thinking you are hooked to a trailer. It sounds like you may have hooked it up to the break wire instead of the reverse power wire? Mine only turns one when reverse is engaged which sends signal to camera

@@jdturbo8234 what color is the reverse power wire? Is it the dark gren wire?

John Fulginti I think the wire behind the dash is a green purple wire. Should have a tag that says reverse I think

@@jdturbo8234 I got that, but at the back of the truck, which wire do I splice into? I have two different green wires, I am using the light green one now. What is the correct color wire that I should splice into? Thanks again for your help.

John Fulginti it maybe different depending on your truck. You just need the reverse positive wire which should be marked on your trailer connection cover

No that's what it will say when you put it in reverse. It goes away when you go back to drive. I just thinks you have a trailer connected. That's where you are getting the power from the camera from

Dudley do rite 2014 but it should be all the same from 2013-2018