Ramset - Powder Actuated Tools Range 

:-)

The real question is will this tool penetrate the human skull and destroy the brain matter underneath?

@@nathandamaren2093 Well, is your head harder or softer than concrete

@@RICHUNCLEPENNYBAGS77 the flesh is not harder than concrete... but i aint sure about the skull

@@nathandamaren2093 Well, think about what'd happen to your skull, and concrete, if you went flying skull-first into concrete. I think probably your skull would be crushed with no real effect on the concrete. Also the manual to this thing is full of warnings about injury or death.

You'll break your wrist. -.-

As a CN railway worker, I'd watch you drive spikes with that.

20mm version coming soon? 🤣🤣

For building bridges

Sill waiting, wish they had one

syrenet yeah you found out... Or lock pickinglawyer ?

@@sprungkartoffeltv5082 I don't usually comment on these things but you know, whether he discovered it himself or found out from the lock picking lawyer it still called finding out. He wasn't claiming to have invented the technique as far as I can tell.

so... guns?

@@BADAB0O0O0O0O0M shhhhhhh, dont call them that, we dont want them to be prohibited

Dorian M 😂🤣😂🤣

TheWarBabe27 Just complying with legislated workplace safety regulations. It helps avoid being sued by people stupid enough to misuse them and then blame the manufacturer for their own stupidity.

New Hope Media thats what I started thinking like it would be damn easy to shoot someone and blame it on them

We just have to follow ohs rules and shit

There are plenty of safety instructions and precautions that are stated in the video and the training and instructional material supplied with these tools.

Murca

lmaoo 😂

estoy en España.. tienen distribuidor... en Barcelona...

Excelente

We are Manufacturer ZG660 Ramset trigger pin mumbai,India

Alexandru Ifrim unfortunately there are people who have done it and many haven't lived to tell the tale. Hence the need for the warnings.

Alexandru Ifrim it's why there's an international award, called 'The Darwin Awards' for people who increase the overall intelligence of the collective gene pool by killing themselves in the most stupid manner. 😆

Alexandru Ifrim on the serious side. Because their have been 'accidents' caused by people misusing these tools the company has a legal responsibility to warn against misuse. That's why the video has these warnings.

+Alexandru Ifrim never underestimate the stupidity of others

Also, don't use it while walking in lava, you could burn your feet.

if I'm not mistaken, it was said that the low velocity tool was designed in the 50's. could be a version there of mate..

We are Manufacturer ZG660 Ramset trigger pin mumbai,India

😂🤣😂🤣 yeah and they can’t be electricians, police or fire fighters either. My SIL is colorblind 🥲

ninja unicorn I’ll take that as a compliment 😀

red button Depends on the country you are in of course. In the land of the 2nd Amendment rights over responsibility are the norm. Elsewhere sanity prevails.

It was a sarcasm, but nice tool by the way :)

red button my reply was more irony with a hint of sarcasm :-)

New Hope Media Muricaaaa

You get it or not yet ?

steven mckinsey did you get it?

How much did you pay?

In some jurisdictions it’s mandatory that tradesmen using these tools are licensed and this was produced as a training aid for those licensing courses.

I am the producer of these videos, not the product manufacturer. Please contact your local RAMSET supplier for any technical or sales support. www.ramset.com.au

It certainly isn’t intended as one but the high velocity tools can, if incorrectly used, send the nail over a short distance at high speed. There have been deaths reported from accidents of this type. Ricochets hitting operators and bystanders. The low velocity tools don’t project the nails beyond a few feet at most and not with any impact. Both are designed not to function unless the front actuating device is correctly depressed by the substrate so not a ‘James Bond’ Casino Royale type of projectile and they are not intended to be so.

The breech accepts .22 caliber blank cartridges designed for the old high velocity powder actuated tools. The barrel is not .22 caliber though as it is designed for the nails it is meant to drive. Attempting to fire .22 ammunition would cause a malfunction likely to severely injure the operator. That’s the long answer. The short one is more of a question. Why would anyone be so stupid as to try?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MOZpy55U-jY.html No but at great personal risk you can shoot them from a .22 cal. rifle

Did you sleep or not yet ?

+Kauwhaka Definitely an Aussie VO artist, Mark Condon www.markcondon.com.au and he does say 'fixings' not 'fuxings'.

Australian designed and manufactured originally. Can be purchased in Australia at any RAMSET outlet.

@@newhopemedia We are Manufacturer ZG660 Ramset trigger pin mumbai,India

Jack, I'm the video producer not the technical support section of RAMSET so I can't offer you advice other than to say that unless you already own a powder actuated tool it would be an expensive way of avoiding using a masonry bit. If the wall is masonry behind the tile have a look at the Ramset AnkaScrew WERCS but you'll need to drill the holes with a masonry bit.

John Smith well one can’t always pitch the content of a video to the lowest common denominator. There’ll always be some who don’t have the capacity to learn.

Bass Based please contact your local Ramset supplier or www.ramset.com.au. I made the video and posted in my YT Channel as an example of my video production, even if this video is now about ten years old. I can’t offer advice on Ramset products.

Alex Williamson it’s as lethal as one if not used properly so yes.

?

?

I get it

don't act like u guys can't see race

+cholan segal Ramset is an international brand, although it started in Australia it is now owned by ITW and marketed around the world as Ramset. As for pricing you'd need to contact the local Ramset distributor/retailer in your country. Some tools require safety training but local laws would be different in each country so I can't answer that question. The best thing is to look up Rasmet online, find your local outlet and ask them as they'll be able to answer your questions. I'm just the producer/cameraman/editor of the video and put it online as an example of my work, though it is now almost 10 years old.

Sir thank u very much for your help

quacka

Definitely the same calibre, .22, but specifically made and power rated for the powder actuated tools with different loads for different applications. In the old high velocity range there is even a .38 calibre tool.

sulimanTC only for those who are bent on suicide.

buklao the video had to abide with health and safety regulations. Of course you may regret it when your hearing goes in later life.

New Hope Media I work with guys much older than me and usually they skimp out on many safety precautions too. Along with alot of other electricians. Of course I understand the given risks

buklao of course, we understand risks we take. However hearing loss is subtle, slow in its onset. Unfortunately it is also usually irreversible and can only at best be alleviated with hearing aids but never cured. Living with a family member with congenital hearing loss, and being a sound engineer by profession, it’s something I am particularly conscious of and mindful of looking after my own hearing as it’s the basis of my career and the source of my family’s financial wellbeing.

New Hope Media wow, you're really bout to make me cry man. I'll definitely get accustomed to using them especially since I'll be working on bigger things mechanical wise (planes) the next few years. Much love to you and your family and as a sound engineer I hope you take the time to listen to Hans Zimmers score of interstellar. Im sure you'll find it very pleasing to the ears

Try www.Ramset.com.au

Angelo Fanella because to comply with Australian Occupation Health and Safety Regulations pertaining to Powder Actuated Tools the operator is meant to say ‘firing’ each time the tool is fired. As these are training videos made in Australia the demonstrator is following the OH&S guidelines. In practice this may not be what happens in the workplace. However, if there were an accident caused by the tool and it was found that the operator had not said ‘firing’ they would be liable under law..

Please contact Ramset www.Ramset.com.au with this question as I am the videographer and have just posted this as an example of my work.

Juni Aja look for a local Ramset reseller or contact www.ramset.com.au for international sales.

PDB except that Ramset is originally an Australian company, now owned by ITW.

I am not the manufacturer or the distributor. I made the video for Ramset. Contact www.ramset.com.au for any product availability information.

Pretty much, as far as the high velocity tools are concerned.

Contact www.ramset.com.au for any product pricing or availability information.

Samme med Spikerpistoler på trøkluft har du ikke bevis yrkes sertefikat registrert i databasen. Får du ikke kjøpe? Skall Di kjøpe på Di ha kurs på våpen.

Tenk på dettefår ligger strødd runt på bruktbutikker og nettsteder fette galskap.

Encuentre un distribuidor ITW o Ramset en su país

tienen un distribuidor en España..

No estoy seguro. He hecho los videos, pero no funcionan para Ramset

Contact Ramset via their website www.ramset.com.au I am the videographer that made these videos I don’t work at Ramset or sell their products.

@@newhopemedia how can i order

Not from me.

Appeltaart well they are generically referred to as ‘nail guns’ in the construction industry.

Gun wannabe

Georgis Yousef the newest version has a voice recognition chip that prevents firing until you say it. Unfortunately it's not the best so you have to say it really clearly and sometimes you have to ask anyone around you to stop talking or using loud machinery.

Glenn Storey yes unfortunately they have or it wouldn't need to have been added to this video as a caution. In fact while making this video there was a news report of a contractor being fatally injured when they fired a high velocity nail through a fixing and it ricocheted back through their face. Sometimes people do dumb things.

It’s not a DYI home handyman tool. It’s designed for tradespeople and the powder activated charges have to be stored as you would ammunition. In many jurisdictions you need to be licensed and accredited to ow. And use it.

theclinger actually having a colourblind relative in the family I discovered how many jobs that condition officially precludes them from entering. Most defence and law enforcement, electricians... The list is surprising. So, as colour coding is a fairly common practise in the construction industry, it’s hardly surprising that Ramset chose that method to identify what are fairly small items, the power load, as they could hardly have a written description on a .22 calibre high velocity load or the low velocity strips. The writing would be too small to read.

The criticism isn't that they shouldn't use color coding, but of their choice in colors, if telling them apart is seen as such a critical factor. I acknowledge the usefulness of color coding, and also see that they would not throw it away for a minority, but differentiation between red and green, while common, is a fundamental design error in failure critical systems.

Cobac well if you could actually do that on a .22 caliber blank shell or low velocity strip at a size that could be felt I’m sure they would. No use doing it on the packaging. Still feel free to write Ramset. I just made the video.