Raspberry Pi FluxNode Setup Guide

Подписаться 11 тыс.

Просмотров 43 тыс.

50% 1

In this video, Goose takes you through all the steps to building your own Raspberry Pi FluxNode.
00:33 Intro
01:49 Online FluxNode Guides
02:49 Raspberry Pi Specs & Argon ONE M.2 Case
07:27 Ubuntu Server
11:09 Flash SD Card
12:49 Stake FLUX Collateral in Zelcore Wallet
14:27 Raspberry Pi Case Assembly
16:19 First Boot
18:19 SSH into Raspberry Pi
20:07 Argon One Fan Script (optional if not using Argon case)
21:21 Configure SSD
31:02 Configure Router
35:30 Install FluxOS
45:20 Access Flux FrontEnd
46:52 Start FluxNode
48:50 Final Thoughts
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
⭐Commands:
Download/install the Argon One Software on the Pi 4 :
curl download.argon40.com/argon1.sh | bash
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
⭐Links:
💻Official Setup Guide for FluxNode on Pi 4:
/ fluxnode-on-raspberry-...
💻Official FluxNode Setup Guide:
/ flux-light-node-setup-...
💻Ubuntu Server Download:
ubuntu.com/download/raspberry-pi
💻Argon One Case:
www.argon40.com/argon-one-m-2...
💻Website: runonflux.io
💻Website: zelcore.io
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
👨‍👩‍👧‍👦 Social:
◆ Discord: / discord
◆ Twitter: / runonflux
◆ Twitter: / zelcore_io
◆ Medium: / fluxofficial
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
👍Please like this video if you find it helpful; leave comments below to let us know what you think. Thanks for watching!

Наука

Опубликовано:

30 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 152

@bjrnerikbye8342 2 года назад

Thanks to Goose and the rest of the team making it possible to work my way through the setup! The Pi is running happily with the confirmed node 🙂

@juansuarez3384 2 года назад

I finally got it done. My man you are a true legend! Thanks so much. No way I can do this without you. I feel very accomplished and excited to be part of this community 🙌 #FLUX

@cryptonia 2 года назад

Goose, I took a Gander at your video and now up and running successfully. I could not have done it without you!

@running11 2 года назад

Just used this walkthrough. Only some small config differences, all easy to determine with common sense. Thank you for the video!

@eliasnikolaidis385 2 года назад

Goose hi, thank you very much for everything. Great tutorial !! I followed your video and I am now running a Cumulus node with my little Raspberry PI with an external 240 SSD. Looking for ways to start my next one. Thanks again!! you are a star!!

@popsyann Год назад

Very good step by step explanation. Great job!

@sandfishhh 2 года назад

Thank you ,really great guide. Waiting for my three raspberry pi shipment, excited to get started !

@rong377 2 года назад

Thanks for doing this. I would have never attempted setting this up without your video. Now I'm running my own node :)

@sweetmaanu 2 года назад

How is performance ?

@JMastrix 2 года назад

Thank you Johnny Sins! I don't know how you have time to do this between all your other careers, but you nailed it!

@ralleknezevic9350 2 года назад

thx so much for this guide...i was able to finish my first pi projekt and node....iam so hyped

@livefreeindustriesllc 2 года назад

Goose your a God sent! Appreciate your wealth of knowledge!

@FloodGold 2 года назад

Excellent video thanks so much. I recommend the DeskPi Pro v2 Raspberry Pi 4 Desktop Case over the Argon ONE and have 2 of them.

@t_dub9423 2 года назад

Thanks Goose! I got my Raspberry Pi up and running a Cumulus node! At first, I made it all the way to the end and it would constantly fail the benchmark. I went through my Router settings and checked/adjusted the port forwarding like you said and that fixed the benchmark fail! I have very little experience thanks for the help!

@ZenWave9 Год назад

Super clear thank you

@acbudget 2 года назад

Stopped at 3:19. Good luck getting a 8GB Pi4 these days... Maybe in Q4 2022.

@betty.k2103 2 года назад

Awesome!

@blackmennewstyle 2 года назад

Great video, just a little tip to activate proper RU-vid video timestamp, you need start with 00:00 in the video description and you name it the way you want, for example, Welcome ;) Have a great week and keep it up the great job

@Benhaswings 2 года назад

Great video the only thing I would do differently would probably usb boot rather than SD. The SD slot can get hot and damage these cards and board over time so I prefer solid state drives :)

@lutherwalker4934 Год назад

It's done

@DanCathers 2 года назад

Hi Goose, great video, thanks. Following your steps leaves me with a running Cumulus node (with current staking cost of 10K Flux). Would I be able to use the node to develop my own app? Does the default Flux node come with the MEVN stack installed? Is there such a thing as a Testnet in the Flux node network?

@dannywoodruffe5272 2 года назад

That was a really good walkthrough, thanks. Question: what are the network implications of trying to run 2 or more Raspberry Pi FluxNodes? Based only on the information provided here, it seems that you would need a separate, dedicated Internet connection for each Pi.

@MC... 2 года назад

🔥🔥🔥

@aburnerphoneg3601 2 года назад

Great series, could you do one with one of those $150 - $220 Celeron based mini PCs (that look like Intel NUCs) for sale on Amazon? Seems like for most people that would be much less hassle as they come pre assembled with ram, ssd, fans, etc AND can be upgraded in the future.

@coreyf311 Год назад

Great video....did I miss where you told the install to use the SSD versus the SD card. I could see in the installation script it was using the /home directory

@RA-qb4gl 2 года назад

Excellent instruction. If you consider a consultant fee to set it up for people I know a few who will pay you.

@2ndtlmining 2 года назад

Can you only stake normal Flux on Zelcore or can you stake BSC-FLUX? Trying to work out if I should use fusion to swap or not

@MrJonusAngelus 2 года назад

Hi thanks for this great video ! Just one question : how do you handle your Public IP Address ? Doesn't your internet provider change it from time to time ? thanks

@Ryan-xq3kl 2 года назад

You guys should consider keeping up with the profitability of the differ tiers and make sure that pi’s can stay competitive with larger machines that way nodes will stay decentralized and people will not close their nodes due to uptime cost.

@glennrren8382 2 года назад

Guys, make sure that you install the Ubuntu 20.04 LTS version and not 22.04 LTS. Took me days to discover that I had the never version. And that resulted in Mongodb not installing and benchmark failing.

@SageRyokian Год назад

this comment just saved me from making the same mistake. Was waiting for ubuntu to flash to sd card and read this comment....immediately realized i was flashing wrong image and was able to change it before getting to far. Thanks!

@bluesprocketcrypto2101 Год назад

As of 11/4/22, which Ubuntu OS would you download now that it's starting at :10.0.xx? Thanks and great job with the video.

@ramyali2782 2 года назад

What is the minimum collateral i can set RPI node with?

@millerz1897 2 года назад

So how does the flux node know to use the SSD? Does this happen automatically or did I miss a step?

@tikurembassa Год назад

Hi there, great guide! I'm up to the point of 'discovering' my M.2 ssd but it is not showing up on the fdisk command. Just the sd card with os. I've reseated it a few times. I am using the Argon One case. Any suggestions? 6 days later: the ssd was corrupted and exchanged at the store

@ivenfurrer6361 Год назад

Hey Hello, Very nice Video. I have a question. Is there a recent video? I have problems when I have to set up the ssd, files.... as i guess the Ubuntu is a newer one and the configuration are different. Would be nice to get any help. Thank you in advance.

@2ndtlmining 2 года назад

Awesome video. Can we already setup the Pis even if the items are only effective in March? With 1000 collateral?

@tommoulton7590 2 года назад

No can't set up with 1000 until March

@BoostedNW 2 года назад

how do you run a whole cluster out of your house with only one external ip? does that not matter?

@vblanche1 Месяц назад

Hi, very nice video. Just checking: is it still a valide tuto 2 yrs after? any update? thanks

@Zaidguess Год назад

thank you for this tutorial I have a question at home the synchronization takes several days with a failure is it possible that the nvme does not mount? downloads can be found in home/ mycumulus THANKS

@MiguelMateo 2 года назад

Do you really need to redirect ports 80 and 443? Those are used for HTTP and HTTPS and we may have them pointing to another web server.

@RacingamesFun 2 года назад

hi! i wanted to ask since i can't find an answer online, how many flux nodes can someone have running on zelcore?

@Nachtigall3000 2 года назад

Can you already start a Cumulus node with the reduced amount of 1000 flux before March 1st?

@MrSkinny602 2 года назад

Just wondering why the flux node needs 53 and 123 to be fwded. I'm guessing 80 is open to see the web front end of the flux node. Is the flux node really responding to dns/ntp queries?

@o.l.cap1tal Год назад

It is a great video. I make my own flux node this instructions. I have Dynamic IP, and always crack down my node when ip is change. I make five times this complicated node. Always that problem is come. So, why dont make it is easier? Make Pi install Flux node boot file? Too complicated the Flux ecosystem now. 😔

@firsttime1392 2 года назад

Great video. Can you explain how to change the IP address in the possibility that you move homes. Thank you

@en4ble773 2 года назад

your private may change or not, only thing changes is your public which doesn't matter for the node which should update.

@TechnoTamilPrime 2 года назад

How much time does flux daemon syncing takes, mine exceeded 2 days and left blocks count is increasing instead of decreasing. What would be the issue?

@user-sv3xb7bn7z 2 года назад

Didn't understand the external ip part at the end .. What external IP? the one your forwarded?

@sandor8022 2 года назад

Hi,is there possible to set up flux node on linux laptop? thx

@cedrake1238 2 года назад

Hi Goose is this still applicable even if the cumulus node goes to 1000 flux collateral?

@Chillwind 2 года назад

did me get an anwser to this question ?

@paulfeeney4735 2 года назад

Is this now obsolete? With the new flux minimum 16gb and 32gb ram hardware requirements? Could we run a rpi4 cluster?

@eliasnikolaidis4177 Год назад

every time I set up a new node I follow your lead. The only thing I am having problem with is to mound the SSD....

@joelpothier2307 2 года назад

Great video Goose! The minimum requirements are already available but any confirmation if this setting will still be able to run a Cumulus node after the collateral halving in March 2022 would be really appreciated! Thx

@georgechristodouloujagaro6292 2 года назад

I am wondering too!!! :)

@brunoscs 2 года назад

Nice video. One question (maybe a dump question), why do I need an SSD and the SD card? Can I flash the SSD directly instead of the SD card?

@tommoulton7590 2 года назад

Yes you can and should! search for it

@ExeterXD 2 года назад

Yea this was confusing

@jdidge1 2 года назад

I have attempted to send myself the collateral twice now and no effect. Am I missing a detail?

@pianocomposers 2 года назад

can 2 nodes run on raspberry pi 7inch touchscreen display(element14)?

@jjaustin-dg9vp Год назад

dose any know if i can use a raspberry pi to mate a smart node btrm or rtm

@DaniLND_ Год назад

Hi do you know if i can use the board of ( bobcat miner 300 2gb ) for do this?

@antonioesposito6085 2 года назад

I tried to install following the instructions in the video however I keep getting a Flux daemon package corrupted error and the program exits while installing fluxnode..any idea why> thanks

@tommoulton7590 2 года назад

Goose, Do you have any experience with the longevity of the larger SD Cards being used a the Linux root partition? I used a smaller on on a RPI2 and it died after about a year of use. Why not boot from SSD? You might need a bigger SSD (500GB) to have Ubuntu and the Flux required space, but no SD Card required.

@tommoulton7590 2 года назад

So I learned that newer bigger sd cards that are Ultra or other premium names are better. Think about video camera cards, etc. I big hint was what does canakit put in their kits.. so just make sure you buy a good one!

@en4ble773 2 года назад

Exactly same question. Any recommendations on the SD/M2 hardware to use 24/7?

@lariost5683 2 года назад

I have used windows 10 on a PI3 and i can confirm that the SD card is the weak point. You're also right about some better cards (premium, ultra) that can help, but we will appreciate a better option.

@FloodGold 2 года назад

There are several solutions to boot from other than the SD card. Search for the DeskPi Pro V2

@BlueTrend Год назад

hello ,why my Flux Blockchain Sync and Status sync connections always 0?

@313Violator313 2 года назад

how much electricity would the pi consume per month if I run a flux node on it?

@tonebaxter 2 года назад

Thanks Goose , quick question! You stated the pi IP address was 192.168.10 but you created port forwarding using 192.168.1 this could be confusing please explain. As well are you using dkms module support in case of having to reconfigure? If not, why not? Other than that, Nice job & I can’t wait to get started…Ty

@vlcekjiri 2 года назад

That's right, I have the same question.

@JoeVSvolcano 2 года назад

Ya, You forward the ports that the outside world needs to see (I think he made it way too insecure but whatever...). He made a mistake, forward ports to the Pi's IP

@en4ble773 2 года назад

you need to allow pi IP on those specific ports.

@michaeld954 2 года назад

I have old raspberry pie 1 lying around would that work

@ama1722 2 года назад

Is it possible to run Nimbus too on raspberry pi 4?

@AlexCracea87 2 года назад

Writing superblocks and filesystem accounting information: mkfs.ext4: Input/output error while writing out and closing file system. Anyone have any idea how to sort the error out when creating the filesystem? Thank you!

@juansuarez3384 2 года назад

My fan keeps running even under temp settings. I updated Ubuntu, installed curl and fan script, set default fan settings and reboot. Also uninstalled fan script, reboot, repeated steps, same issue. Idk what I'm missing. Any suggestions?

@TechnoTamilPrime 2 года назад

Can you provide seperate video on router configuration more detailed explanation

@fajar79 2 года назад

for home users with network behind NAT and DHCP from ISP(share 1 public ip to multiple), running fluxnode is not possible i believe, unless rent vps, setup vpn, port forward from vps to home using dynamic ip

@en4ble773 2 года назад

in this case you may need to order static from isp...good point though!

@TechnoTamilPrime 2 года назад

At the final stage during cumulus node setup, status chances from started to DOS. Trying for past 15 days. Anybody please help

@SanjayKumar-zc1wu 2 года назад

‘Lost+found’ is not found under ssd rather its in ubuntu pwd after boot. where am i going wrong ?

@josem3991 4 месяца назад

Hello, after executing the last sudo systemctl reboot command at minute 30:32, from there I have not been able to access my raspberry IP again. If the same thing has happened to some of you, I would ask you to help me solve this: ssh : Could not resolve hostname osw: Temporary failure in name resolution

@sandor8022 2 года назад

Im think running the flux node on this linux laptop

@kaansevinc6182 7 месяцев назад

Hi i had after mounting this problem : mount: /media/ssd: wrons fs type, bad option,bad superblock on /dev/sda1 ,missing codepage or helper program or other error and i fixed it in fstab with using default value: UUID=your id /media/ssd ext4 defaults 0 0 now its working

@planetsurgery 2 года назад

@23:50, When I used my same sdcard disk (my 128gb, verified), it completely erased ubuntu from it when fully proceeding / ignoring the "Warning: Partitions on [location] are being used." The disk with my file size was "/dev/mmcblk0". Got absolutely nothing similar to your "/dev/sda".

@user-pd2ds5dj9w 4 месяца назад

Hello, I would like to know if you know if you must have an SSD in addition to a MICRO SD to run the flux node?

@Neonjer11 2 года назад

i have everything setup correctly but i keep having a IP issue. any way to correct this.thx

@johnbubu8310 2 года назад

Everything fine until I got to the docker installation. Im using Mac M1 and I am trying to install Docker from Terminal on my mac but when I press 1 on the menu it gives me an error OS VERSION NOT SUPPORTED :( so I cannot install Docker. Any help would be really appreciated! Thank you

@ArtofFacts-lp6xz 7 месяцев назад

Hy i am using a pendrive in the place of sd card is it okay..

@sinkovcm Год назад

I am having problems with mongoDB not installing. ubuntu 20.04.5...is mongoDB supported in this release, I know that in 20.04.4 worked fine...Is there any workaround?

@ArtofFacts-lp6xz 7 месяцев назад

Mounting failed after reboot it show while booting mount failed and after I log back in and if I check media/ssd with ls command it doesn't show lost+found.. What to do next?

@gkaruk 2 года назад

Great video and built 1st RaspPi4b 8gb Node. But.. its failing the benchmarks for CPU and disk writes. So little confused where to go to start looking at fixing that, be good to have a Common Problems setting up FluxNode be really useful. Guess i be heading to Discord channel to investigate.

@mastermichell 2 года назад

I have the same issue, the benchmarks failed no info is really extrange

@gkaruk 2 года назад

@@mastermichell I found the cause. I used my own tech experinece and thus used the latest Ubuntu Server 22.04 think all latest fixes. However, it doesnt work with MongoDB thus breaking the benchmark. SOLUTION: rebuld with Ubuntu Server 20.04 LTS. All good and up and running now. Couple other things I found be aware: TIP #1: Make sure use use Ubuntu Server 20.04 LTS and NOT 22.04. Else benchmarks fail. TIP #2: Once boot, wait for the Unattended Upgrade to complete (check tail -f /var/log/unattended-upgrades/unattended-upgrades-dpkg.log) TIP #3: fstab config needs defaults to work eg. UUID=xxxxx-xxxx-xxxx-xxxxxxxx /media/ssd ext4 defaults 0 2

@mastermichell 2 года назад

@@gkaruk could you provide that ubuntu version, I could'n found

@mastermichell 2 года назад

@UC6FYZt0srX4HKDChnQ9N1qQ Thanks for the help I solved the other issue was the ports, I selected the option 14 for the UpnP and works, was hard 5 long days

@2ndtlmining 2 года назад

Struggling with the Fstab to work, any idea why i can mount fine manually but then editing and rebooting not working?

@sudo936 2 года назад

try this text in the fstab file after the "ext4" : ext4 defaults,noatime,rw,nofail 0 0

@2ndtlmining 2 года назад

@@sudo936 Thanks for coming back, for now i changed it after some googling to "defaults" with nothing else, do i really need the other commands like rw or nofail?

@sudo936 2 года назад

No reason for the rest that I know of. If just defaults work then good!

@2ndtlmining 2 года назад

@@sudo936 if it doesn't I'll find out but thanks for helping!!

@millerz1897 2 года назад

The problem is there is no 1001 user-created yet. (That happens when you install docker) use "defaults" for the install then change later.

@pythonchin779 2 года назад

Do we need Flux to run this?

@user-hh1ue2ht7p Год назад

Сколько можно подключить raspberry pi4 к 1 аккаунту и можно ли подключить ssd большего объема?

@gregorr8042 2 года назад

I tried this twice, I always error out after Imodify the fstab file, it doesnt like the uid=1001,rw,users says not valid UID?? Help?

@TangRev 2 года назад

me too

@tomRX4878 2 года назад

So this means I need a 64 - 128 GB microSD card AND a 220 GB SSD, right? - Further more what bandwidth do I need at home? Or what does "2.5 TB Bandwidth" mean. Will the node download 2.5 TB every x-time?

@user-pd2ds5dj9w 4 месяца назад

Hello, I would like to know if you know if you must have an SSD in addition to a MICRO SD to run the flux node?

@nathanoconnor3464 2 года назад

Hi, I'm having problems with the ssd on the final steps when everything is working fine all the way up to the reboot and the I'm getting "give root password for maintenance"

@nathanoconnor3464 2 года назад

its the bit regarding fstab file. Yours is nano 4.8 mine is 6 something

@tikurembassa Год назад

Anyone here have the issue that the node p/w is returning an "access denied" error? I wrote it down so I know it's correct. I was nearly up and running and then failed the benchmark for upload speed. A day later and I return to setup and pw for node is failing and I've tried going back to start but get other errors there also. Anyone have suggestions?

@MrRfuxyou 2 года назад

Great video but I need some help... I've tried several times, eventually starting from scratch twice. Everything is perfect until 30.32. when I reboot, the start up says "[FAILED] Failed to mount /media/ssd. Ive continued to check and when I do media/ssd (30.54) it is blank and does not show lost+found... the ssd shows as dev/sda1 so I know the device accepts the ssd but it will not appear in media/ssd. any guidance?

@Kouickk 2 года назад

i have the same problem, have you find a solution ?

@MrRfuxyou 2 года назад

@@Kouickk just redoing that step anytime I have to reboot the pi which shouldn't be a common occurrence. Everything else worked but I still haven't found a solution to mounting the ssd

@Kouickk 2 года назад

I found the solution in next comment s. Just put "defaults" after "ext4" and nothing else behind, in the "nano etc/fstab/" step. Reboot and you'll be in your ssd.

@millerz1897 2 года назад

The problem is there is no 1001 user-created yet. (That happens when you install docker) use "defaults" for the install. Also, you don't need all the ports, inbound. Most likely you already have them outbound. You only need port forwarding for 16124-16128, and 30000-39999. UPDATE: The new install script adds an option 14 which allows you to run 8 systems behind the same IP as long as you have a UPNP router and the service enabled. So, as of now, most folks won't need to do the port forwarding at all....

@manageratroots2134 2 года назад

Thank you for posting!! Same problem here.. tried for hours to resolve, it worked.. after extension tab defaults... nothing else

@ArtofFacts-lp6xz 7 месяцев назад

Hy my ssh is showing inactive or dead..

@manageratroots2134 2 года назад

Update: it was posted below👇🏻 it worked.. after ext4 tab defaults then nothing else.. save and exit. Hello sir! So I'm following you guide, using the exact pi and argon.. I am stuck on the mounting part of the sda1 uuid part.. after I do it and reboot there is no lost+found? I'm using putty on windows, I have tried 5 times.. same error" failed mount" 🤔 after reboot. Any suggestions

@jiunn85 2 года назад

hi, i'm facing the same problem, may i know did you fixed it?

@manageratroots2134 2 года назад

@@jiunn85 yes, after you put in the ext4 hit tab and put in defaults that's it. Just save and exit

@TechnoTamilPrime 2 года назад

During the final stage of mounting SSD I'm not getting Lost&found as you mentioned it again displays same command /media/ssd$ comes again and again when I type "ls". PLEASE HELP ME

@spiff80boy 2 года назад

See reply above. You need to change the line you add in /etc/fstab. use "defaults" instead of "uid=1001..."

@TechnoTamilPrime 2 года назад

@@spiff80boy thanks, it works now after doing as per ur advice

@karolk.9786 Год назад

@@spiff80boy exacly, this working also for me :)

@harleyhall8808 2 года назад

after mounting ssd and rebooting i cannot ssh in all i get is connection refused ?

@simonnguyen2117 2 года назад

same

@TouchthisiProduction 11 месяцев назад

having the same issue. booted up the Raspberry pi with a screen and see a bunch of errors

@mikegla1746 2 года назад

The problem is collateral budget...

@en4ble773 2 года назад

Recommended SD and M2 for this application anyone?!

@Alpejohn 2 года назад

If i want to do this on a PC, i guess i'll just install the Ubuntu server on it, and then SSH into it and its all mostly the same after that? I already have a small PC that fits perfect for this, so i dont have buy an expensive PI 4 just for this. :-)

@Alpejohn 2 года назад

Tried installing it, got half way until i needed the stuff from Zelcore wallet. But when i send Flux to my wallet, i send exactly 1000 flux and it will automatically get into a node? I dont understand how that works.. Or if i have to do anything to get it so i can use it in my future node..

@hait3k 2 года назад

stuck at creating journal

@kaansevinc6182 7 месяцев назад

and now i have the problem that i can`t istall docker over the multitoolbox : Module: Install Docker ================================================================ 🚨 ERROR: OS version Ubuntu - jammy not supported 🚨 AVX CPU instruction set not found and is required to use MongoDB on jammy 🚨 Ubuntu 20.04 LTS is the recommended OS version... please re-image and retry installation 🚨 Installation stopped...

@kaansevinc6182 7 месяцев назад

I had the wrong ubuntu version changed to 20.04 now its working