I used to be the people sitting on sofa and watching cat videos (^^). I am so excited to learn from you to get the knowledge of basic wiring and coding. You are a legend!
Great video Paul ! You're a true hero, in many aspects, not only over here with the RPi/Arduino/etc... videos, but also your work in Uganda ! Great country, I've been there once ! Very friendly people !!
I AM LEGEND! It was fun to put the analog input and servo lessons together for this homework. I guess I will have to learn how to post videos on the internet to prove that I actually do the homework. Thanks so much Paul for all the time and effort you put into these great lessons.
If you have a smart phone, just record a short video of your project. Then go to youtube, and look in the upper right corner of the screen, and you should see a little camera icon with a + in it. Click that, and it will allow you to upload your video to youtube.
As always Thanks Paul. My Servo does not seem to work with 3.3Volts. It does with 5V connection, and 3.3v signal though noisy. I tried adding external power at 3.3v in parallel just incase the Pi was running low with my 150% overclocking but that didn't help. When I received the servo, there was oil on the outside. An identical unit does work with 3v3, so I guess it's bin time. :)
Been loving all your videos and now we get to the stuff I came to learn! My Eye will come alive soon! can't wait! :) As of now the Raspberry Pi can power two micro servos without issues. If you want to use more or the larger servos you will need an external power supply. Update: directly driving the server like this is using way to much power and will reboot the computer. You most likely need to use a library that will slow the movement of the servo do. :(
Hi Paul, Another great lesson as usual. You may have already answered this but was wondering if we will be incorporating fusion 360/3D printer knowledge in with the raspberry pi lessons, especially when we get to raspberry pi projects?
Hey thank you for the lesson, I have a strange thing happening to me with this lesson, I have done everything exactly the same as you, and when I run the program and select PWM of 3% my whole raspberry pi reboots, I am not sure why, I disconnected everything and transferred GND and GPIO to 39 and 37 pins (Board mode) and it works fine until I reach PWM 10% then it reboots again, I have not idea what is happening, could it be that my Servo is faulty, and it is short-circuiting something? Honestly, I am kinda afraid to try again in fear of burning something on my PI EDIT: Ahh sorry, yeah seems that Servo is at fault, as I have read other people had similar problem
PWM is a clever way to drive 1 servo on Pi. I believe PCA9685 with the Pi could drive multiple servos and would not require PWM. Also, I think you could then control the servos with multiple potentiometers attached via the ADC chip used in earlier lessons.
Yes, I love the PCA9685. The servo is still controlled by PWM, it is just it does the PWM for you. We will probably use one in the future, but I start this way so viewers can better understand how the servo really works.
Hello, I have a question: Couldn't I apply some of these lessons on the jetson nano since it uses GPIO pins as well?.. maybe the setup is different but shouldn't the components be programed in the same way using the GPIO pins?
Since both are linux machines, much of this will work on he Jetson Nano. Realize though, I made a seperate class on the Jetson Nano, you might check that out.
My servo is super duper jittery and kinda unresponsive at times, even though the duty cycle I am outputting appears to be stable from the values I am printing to the screen. Also getting lowpower warnings from my pi. I am legendish. (edit: I moved the servo ground to a separate ground pin not connected to the ADC circuit, and that cleaned up the jitter A LOT!)
@@paulmcwhorter Many thanks for the fast answer. I'm using the official RPi power supplier. I will try to get another servo to be sure that it's the source of the problem. Great tutorials!
295K Subscribers and only 2.1K views (where are the remaining 292.9K subscribers?) And of the 2.1K that watched the video, just 138 liked it. Really guys? We can do better than that :)
I still need to get my lesson 17 homework posted. As soon as I started recording, my program stopped working and I have no idea why. Hopefully I can get it diagnosed and filmed this weekend. I have NOT folded like a cheap lawn chair, you only fail when you stop trying!
Unfortunately my Raspberry PI 4 reboots when I run the program and enter a value. I tried another motor, checked the program and the wiring, but the Raspberry PI keeps rebooting.
@@paulmcwhorter Yes, indeed, I do. But I saw in several forums on the internet that more people have the same problem. Maybe the servo motor draws too much power from the Raspberry PI?
Yes, that is what is happening. Usually the servos in the kit do not draw too much power, but perhaps yours does. What you will want to do is power the servo from a seperate power supply and then just control it from the Pi. Make sure all grounds are connected together.
that was the MOST FUN homework assignment so far.... challenging and rewarding.... 1st though... my servo, when connected to 3.3V caused my RPi to RESET as soon as I gave it a command ... Connecting it to 5V solved the problem.... thanks Paul... . ANOTHER most excellent lesson .... looking forward to what's next... God bless you, Sir. oh.. here is link to my homework : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q5BFmEWBG_U.html
So I have 2 homework video this week. This one shows how I read the ADC0834 without a library ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-o5uGdcsS880.html and this one is the lesson 19 homework recreating the Arduino knob sketch ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-39fPTceztt8.html
Thanks for the great lesson Paul! Here is my homework: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mARXLF5cnKE.html. I worked out a way to remove the jitter from the servo arm without using a driver board.
I don't know why my comments keep disappearing. Does someone disagree with what I'm saying and therefore keeps deleting everything? Is someone trying to wipe me off the face of RU-vid? Just because I have a persecution complex doesn't mean that people aren't out to get me. Here's what I wrote earlier. Hi Paul & Guys I get very confused by live chat replays. Lots of comments (especially mine😁) seem to go missing. I think you mentioned, Paul, that you're going into the bush in August and also that local people are having big problems. Did you say actually starving? Are they looking enviously at what you have? Maybe, in the circumstances, it wouldn't be the best time to go away. We all care about you and your family and wouldn't want anything bad to happen. Stay safe!! On the 'how to pronounce sudo' debate. I mentioned yesterday (in a lost comment but Brian read it) that I recently learned that sudo doesn't stand for 'super user do' - it's 'substitute user do'. You can use the option -u for which user you want to impersonate which defaults to root. Hence the confusion as root is a super user. The reason why someone came up with the command 'sudo' is now clear - 'sudo' sounds like 'pseudo' therefore there is no doubt as to how to pronounce it. Once again, you're right, Paul!! My info came from a very knowledgeable chap called Dave MacKay who writes articles for How To Geek. Well worth checking out im(ns)ho
Charlotte, rest assured that I have never deleted one of your comment. If you try to make comments with links the youtube algorithm will delete the message and I never see it. Yes, people here are literally starving. Last year the rains did not come in the rainy season, so crops failed, which is devastating to a sustinance society. Then on top of that, food prices have doubled in the last two months. People are fleeing the cities, going back to family villages, but things are no better there because of crop failure.
@@paulmcwhorter What can we do to help? I always fear that aid doesn't get to where it is intended. btw I wasn't implying that it was YOU who was deleting my comments
Unfortunately the vast majority of things like orphanages are somewhat scams. Many times there is an orphanage, and there are orphans, but most of the money is going to enrich the administrators. I appreciate your heart to help, and people here really need help. I dont want to sound harsh, but this is the fundamental problem. The culture here is one of lying, cheating and stealing. These cultural norms lead to poverty. Poverty leads to starvation. I am not saying it is the starving persons fault, and am not being hard hearted. I am just saying the solution to the suffering here will never change until the core issues of honesty are addressed. Hence, my work focusses on discipling people in God's word, and showing them there is a different and better way to live. By living according to Biblical principles, we would not lie, cheat or steal, and when we live with a strong moral code, there are natural benefits . . . a business endeavor where the proprietor treats customers honestly will naturally build a successful business. A business endeavor where the proprietor lies, cheats and steals from customers will never prosper. No amount of bags of food handed out to people will solve the problem is we do not address the core issues that have led to the poverty and misery. When I invest time in discipling a small group of people, and train them in basic core moral code, I then will invest in their business ideas. Things like a rabbit project, a simple shop in the trading center or a sewing machine for someone. To me, this is the only thing that will work. It is a slow and laborious process, but in my mind the only thing thatt will genuinely make a change for the better.
complete disaster. On RPI5 everything is really different! really challenging this time for me if even possible! Servo ranges from 0 to 90 degrees max and it is very unstable!
A lot changed on the pi 5, and the pi 5 does not really offer any advantage for projects like I do in these lessons. Really recommend using a pi 4, and using the same OS I use in these lessons
yes I noticed. I actually manage to make this and the other lectures work so far with GPIOzero library which to some extent is easier BUT it seems extremely difficult to get the servo being stable and not to horribly jitter. Some forums have already discussed and offered some "solutions" which are a bit too advanced at the moment for me. Regret I did not follow your advice and went for the new hardware! These gadgets are still on the development face and change rapidly @@paulmcwhorter
Homework ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nIO4rtyoyLQ.htmlsi=BqlzR1GbqHNeIxiU I used this servo in other project so its quiet wears out, causing vibration.
