Тёмный

RAZER DeathAdder V3 Pro - Gaming Mouse Review | Before You Buy 

Wasabi
Подписаться 4 тыс.
Просмотров 16 тыс.
50% 1

The Razer DeatchAdder V3 Pro. One of the best ergonomic gaming mice today and for good reason!
Woops. Sound Test labeling for the scroll wheel is a little OFF. My bad!!
Please support my channel here!😊: / wasabitech
*This is NOT a technical review. I do not want to put much emphasis on the numbers because gaming tech has reached a point where we are down to comparing milliseconds.
Not to say that milliseconds are not important in gaming but there are too many variables that come into consideration. PC performance, monitor refresh rate, cables, internet speed etc.
Technical data is something I do not want to dive deep into because I feel that it would bring more confusion than value to the casual consumer. To be completely honest and open here, I do not have the engineering experience or industry equipment to test the technical performance of electronics.
P.S. My apologies, I'm not sure if Faker used the DAV3P at League of Legends Worlds 2023. Would be kinda embarrasing for Razer if he didn't though.. hmm. Maybe event photos would help.
Anyway on a brighter note, I think I finally figured out my mic settings (I will continue to improve!). My voice should sound a lot clearer now.
Time Stamps
0:00 Iron Wasabi Man
0:26 Unboxing
1:48 Expectations
2:13 Design
2:56 Shape & Feel
4:05 How I hold the DAV3P
4:51 Grip Styles
5:07 Razer Optical Mouse Switches Gen-3
5:45 Weight
5:54 Coating
6:58 FAKER EDITION
7:28 Side Buttons & Scroll Wheel
8:40 SOUND TEST
9:24 Sensor
9:47 Polling Rate
9:56 Razer HyperPolling Wireless Dongle (Not Included)
11:25 Battery Life
11:36 Mouse Skates
12:09 Peformance
12:24 Sensor Placement
12:50 What I Like
13:18 What Could be Improved
13:44 Conclusion
14:13 WASABI HAS SPOKEN
Please consider giving this video a thumbs up & subscribe if you enjoyed the video! ^^ New videos every week!
youtube.com/@wasabitech?sub_confirmat...
-------------------------------------------------------------------------------------------------------------
MY PC SPECS
Case: Lian-li O11 DYNAMIC
CPU: AMD Ryzen 7 5800X 8-Core
RAM: XPG DDR4 D50 RGB 8GB 3600MHz x2
MOBO: Gigabyte B550 VISION D-P
GPU: GIGABYTE Vision GeForce RTX 3080
#RAZER #deathadderv3pro #gamingmouse #review #huntsmanv3 #Overwatch2 #gameplay #mw3 #Gaming #valorantclips #razer #gamingsetup #clean #Trending #rgb #razergaming #asus #ROGazoth #rgb #akko #gamingcommunity

Игры

Опубликовано:

 

10 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 96   
@OfficialThermal
@OfficialThermal 7 месяцев назад
I am going to be fully honest, I have watched a ton of videos on this particular mouse as well as tens if not hundreds of other mice/tech products. When I first saw this video in my Recommended, I thought, "This seems fairly interesting, I'll watch it later." Now it is later, I finished the video and I immediately thought to like and subscribe and I assumed you were some big RU-vidr that I hadn't watched yet. Nope, you have 300 subs. The humor, consumer review, editing, and the overall quality of this video is MINDBLOWING considering how small you are. I really appreciate you talking about hand size and all of that other stuff, most RU-vidrs will just go on and on about the 4k polling rate or whatever... Great job on the video and I am excited for your future reviews! Good luck!
@wasabitech
@wasabitech 7 месяцев назад
Wow i'm grateful to read this. It keeps me motivated and confident that the content is going in the direction I hoped for it to be! and thank you so much for getting my humor HAHA! I laugh a lot at myself while editing videos. I'll keep working on improving my content!
@OfficialThermal
@OfficialThermal 7 месяцев назад
@@wasabitech Most people wouldn't even care to read their comments. You rock! Keep it up!
@wasabitech
@wasabitech 7 месяцев назад
@@OfficialThermal they dont???😧 either I rock or I live under a rock haha! Thank you very much for the encouragement.
@OfficialThermal
@OfficialThermal 7 месяцев назад
@@wasabitech Well, not everyone, but a lot of people just think, "I want to get rich off of RU-vid," and don't care about their subscribers or anything. Also, you're welcome!
@FlyinWithBrian123
@FlyinWithBrian123 2 месяца назад
Thank you for going so in depth and adding the little parts where I can jump to right where I want!
@tadjman4059
@tadjman4059 27 дней назад
You are an awesome reviewer for real. I can’t understand how you have only 3k subs
@zbowmanYT
@zbowmanYT 7 месяцев назад
Perfect timing for the review, I just bought one last night! I keep seeing it come up on lists and people always speak so highly of it. I've never been a fan of Razer products, but like you said, it's just that good. Great review, loving your videos, and your positivity! :)
@wasabitech
@wasabitech 7 месяцев назад
I hope you have a good experience with it! and thank you very much for your kind words :) I like to watch reviews after I buy something too haha!
@lukai_21
@lukai_21 5 месяцев назад
I love that we both have around same hand sizes and hold the mouse the exact same way. Your Definitely my go to when it comes to reviewing mouse and keyboard. Your channel perfect
@wasabitech
@wasabitech 5 месяцев назад
Thank you my friend!! This is so nice to hear 😊 Glad to have you with the channel!!
@Cahmmyy
@Cahmmyy 7 месяцев назад
its nice to see you growing man been watching since the razer v3 pro vid edit: I have the viper mini love and overtime has been great i play with a butterfly grip my hands are a bit big but very comfortable still
@wasabitech
@wasabitech 7 месяцев назад
This is very nice to hear! Thank you. Butterfly clicking is something I haven't heard in a long time haha! Im glad the mini works for you!! :)
@gaetnus7423
@gaetnus7423 4 месяца назад
After this video, i bought a second hand deathadder v3 pro white for around 60$ and I am so happy. I just changed the scroll encoder to TTC gold and also fixed the side creaking issues I had by placing tape where the clips sit. My new endgame mouse for sure.
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
Best mouse ever made. I've been using it for over 12 months. Not a single issue and comfortable as heck to use. Quite durable too as I've accidentally dropped it on the floor multiple times (due to how light it is and moving stuff on my desk). Has marks from the drops. No issues with flex either that some people claim. Of course I don't squeeze the living crap out of mice either.
@wasabitech
@wasabitech 7 месяцев назад
I'm glad to hear that you've been enjoying your mouse for such a long time! And totally agree that the build quality for this one is really good.
@KhaosKev999
@KhaosKev999 4 месяца назад
I had the Razer DeathAdder 3.5G for 15 years and now I am finally upgrading to the razer deathadder v3 pro faker edition (as it has better coating like the OG coating). I also had the razer deathadder v2 but the coating is bad and ended up selling it and using the Razer OG mouse. the razer deathadder v3 pro is exactly what I have been waiting for so many years the only issue is the coating. I wish they made the coating like Logitech g pro series. the Faker edition has a similar coating to the Logitech and some improvements to the razer deathadder v3 pro making it the ultimate option for someone who wants to have the ultimate mouse!
@wisetone
@wisetone 7 месяцев назад
5:30 -It's true all the DA V3 Pro I've tried has the mushy and grinding issue but only on the left button if you press all the way down, thanks for stating that.
@wasabitech
@wasabitech 7 месяцев назад
Thank you for sharing more on this!
@BobTed8
@BobTed8 7 месяцев назад
Keep up the work!
@wasabitech
@wasabitech 7 месяцев назад
Thank you my friend! I will!
@fangsenpai4802
@fangsenpai4802 7 месяцев назад
Brav the quality of your video is quite nice 👍
@wasabitech
@wasabitech 7 месяцев назад
Thank you senpai! I want to keep it as natural as possible without too many "model" shots of the mouse for people to get a better sense of what they'll see IRL 😅 Thank you for your support.
@JustAFan444
@JustAFan444 7 месяцев назад
I love this mouse. Switched to it from a Superlight and don't regret it. The one gripe I have is the power button. I REALLY wish it was an on/off switch... I know it seems like a small thing, but it bothers me every time I turn it off and on.
@wasabitech
@wasabitech 7 месяцев назад
The power on and off with that button does bother me too!! It really disrupts my "flow" when getting on or off my setup 🤣
@Darkk194
@Darkk194 3 месяца назад
whats the difference between classic base and smooth texture for this mouse because it gives me two options to choose from these
@insertnamehere4419
@insertnamehere4419 7 месяцев назад
Awesome mouse. I bought the 502x and took it back because the scroll wheel is trash. The scroll wheel on the DA V3 is great, it's very light and fast.
@wasabitech
@wasabitech 7 месяцев назад
It is a rather light scroll wheel that some may or may not enjoy but I'm ended up with a mouse you enjoy! Thank you for sharing :)
@Agent_Alpha
@Agent_Alpha 7 месяцев назад
Bro actually released the video after T1 won to say that Faker won 4 times 💪 Jokes aside, this is currently my favourite mouse of all time, already caught my eyes with the rendering images (imo it looks nice both on the webside and irl), the shape is immaculate, but there's 2 big problems: 1. Creaking and shell flexing after 3 months of usage, i fixed this by applying some 3M tape to the insides of the shell, where the top and bottom makes contact, and this just completely got rid of the creaking. (Abbadan's mod, you can see how he's done it by searching Deathadder V3 Pro fix) 2. Scroll wheel started randomly jumping out of nowhere, very annoying when gaming, it just randomly switches my weapon and made me die in Vermintide 2 a few times. I replaced the encoder with TTC Gold encoder. It sounds much nicer and tactile, and it doesn't jump randomly anymore.
@bonkersbruv
@bonkersbruv 7 месяцев назад
spot on about these two problems
@Agent_Alpha
@Agent_Alpha 7 месяцев назад
@@bonkersbruv I was going to send it out for an RMA but after surfing through Reddit, quite a lot of people still had this issue after RMA-ing so i thought modding the mouse was smarter. Now no matter how hard i squeeze, the sides wont budge and the scroll wheel feels awesome to use. P/S: The encoder height for DA v3 Pro is 15mm for anyone who wants to swap out the encoder
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
I've had my DAV3 for 12 months. Absolutely no creaking or flex. Scroll wheel working perfectly and I use the crap out of it.
@wasabitech
@wasabitech 7 месяцев назад
HAHA! This is funny thank you!!! I've actually been wanting to review it a few months back but had to deactivate my channel due to personal reasons. Just got lucky with the timing hahaha. And thank you for sharing your experience with the product here! I'm pretty sure it would help those who are interested in the mouse!!
@deaqkiid
@deaqkiid 4 месяца назад
I'm seriously considering getting this mouse. Seen plenty of reviews and its mostly positive. My main concern is that I've heard from a lot of people that the build quality isn't perfect, and that it starts creaking after a couple of months. I was wondering if you feel any difference since you first bought the mouse?
@veikkuz
@veikkuz 4 месяца назад
underrated content
@FaZe-StyL
@FaZe-StyL 5 месяцев назад
Thinking of getting this or the mouse Twistzz uses right now I have the Viper V2 pro and I think it’s to light for me after 1 year of use. i tried a $20 dollar mouse and did better then I ever did on the V2 pro 🤣
@wasabitech
@wasabitech 5 месяцев назад
🤣🤣 What about Razer's latest release of the DAV3P with the 4K dongle? That version of the mouse has the grippy coating of the Faker Edition :)
@ManjeetSingh88
@ManjeetSingh88 4 месяца назад
I am thinking of purchasing a faker edition to upgrade from G502. Is it a good choice as reading few people have creaking or other issues. Should I buy a faker one or not... please suggest.
@wasabitech
@wasabitech 4 месяца назад
Hmmm I would suggest to only get the Faker Edition now if you really like the color and design or if you plan on keeping it for collection because its no longer being sold on their website. it's a good choice also because you are coming from a G502 shape. Razer has recently released an updated Black version of the DeathAdder V3 Pro and it has a Smooth Touch Finish coating on it. It's only available bundled with the HyperPolling Dongle. If you are set on getting a DeathAdder, that is the version I would go for because any creaking or issues should have already been worked out with this version (i hope) 😊
@ManjeetSingh88
@ManjeetSingh88 4 месяца назад
@wasabitech thanks for your reply!! I ordered and received the Faker version, but if they black one which you mentioned above is more nice as compared to Faker one, then I will return the Faker one. But the problem is that I checked on Razer website and they mentioned about polling rate for mouse but on Amazon when I checked for same product then I am not getting surity whether it is same or older one. I feel Faker one more comfortable and too light in weight in my hands as I have large hands. 130 or 140gm vs 63gm
@jmy0616
@jmy0616 3 месяца назад
Just bought the wired version for $49, I’ve heard the Razer software comes with a bunch of garbage but you have to use it to set up 8k. Can anyone confirm this?
@Dew4lk
@Dew4lk 7 месяцев назад
No side flex, creaking ect? I've heard that the wireless version has a lot of QC issues compared to wired version.
@OfficialThermal
@OfficialThermal 7 месяцев назад
I've heard that it usually starts months after using it.
@wasabitech
@wasabitech 7 месяцев назад
No side flex or creaking on mine. Perhaps I got lucky or i'm not squeezing the mouse hard enough when I use it...
@limitedkraken263
@limitedkraken263 7 месяцев назад
Is that the 4k polling rate dongle? I thought you had to buy it separate?
@wasabitech
@wasabitech 7 месяцев назад
Yes you thought right! It's a separate accessory that is a Razer.com exclusive now. I hope they make include it as standard with all their future Pro models!
@alexandergordon3022
@alexandergordon3022 7 месяцев назад
also be careful Dongle issues a a huge problem with this series of mice. bought 2 both sets of dongles died. Not buying from razer for a while. perfect fit for my hand but the dongle issue ruined it for me. Never had any dongle or receiver issues before or after this with any other mice
@wasabitech
@wasabitech 7 месяцев назад
I understand where you are coming from. Bad experiences like these do ruin how people feel about the brand and I hope that they continue to work on improving QC with all their products! Also glad to hear that the DAV3P fits you well!
@3choblast3r4
@3choblast3r4 7 месяцев назад
Bro I really need to know if this thing works with the ps5. I want to use it both on pc and ps5. My g502 lightspeed works with the ps5, but the newer g502 x doesn't work wirelessly and only works wired (well I mean it still works wireless but non of the side buttons work even if you bind them to keys in the software etc). I need to know if this mouse and its side buttons work on the ps5. I love everything about it except the fugly looks lol. I also wish both this and the viper v2 pro had an extra sidebutton. Only two is so limiting. I don't need 12 buttons, but I'ven noticed in most games I want to have at least 3 of them. One for healing if applicable, one for melee, and one for some other mechanic etc.
@wasabitech
@wasabitech 7 месяцев назад
Heya! Im sorry but I am unsure about this as I do not have a PS5 on hand but I just did a quick search on the internet and there has been a few people who got it to work on the PS5 but with no mention of the side buttons in particular unfortunately 😅
@3choblast3r4
@3choblast3r4 7 месяцев назад
@@wasabitech Thanks bro, looked around a ton but couldn't find any mention of poeple using it on the ps5.
@wasabitech
@wasabitech 7 месяцев назад
@@3choblast3r4 my pleasure!! I hope you find something on it soon😄 Thanks for dropping by!
@NailNB
@NailNB 3 месяца назад
6:25 drag clicking only works with mice that have a doubleclick issue it will not work on a deathadder
@el1jahone
@el1jahone 7 месяцев назад
THE WASABI HAS SPOKEN
@3choblast3r4
@3choblast3r4 7 месяцев назад
As a Japanese looking dude, with Wasabi as his name. You'd think you would recognize that it's supposed to be a samurai mask on the faker edition (...I'm not sure lol)
@wasabitech
@wasabitech 7 месяцев назад
Ahhh this one of the first time's someone said I look Japanese! hahaha😂 I had another look on the internet about this and I believe its supposed to be a dragon!
@noisenoys
@noisenoys 7 месяцев назад
I have only 75hz monitor, is 2k polling good? or only 1k? what you say? hehe
@wasabitech
@wasabitech 7 месяцев назад
Hey thereee. I would say not to worry too much about high polling rate. Its good to have if you plan to get a monitor with a higher refresh rate in the near future but for now I would personally just use 1k with that refresh rate and enjoy the much longer battery life out of the mouse with it :)
@jrm8206
@jrm8206 2 месяца назад
Where is the wireless Deathadder Mini 🥲
@bleu_onsp
@bleu_onsp 6 месяцев назад
The grip tape still looks ugly on the black one, making the mouse look patchy. Not to mention the rough texture might be too rough for some people. Threw it out after using it for 5 minutes lol
@wasabitech
@wasabitech 6 месяцев назад
Hahaha! I get what you're saying 😂 Did you manage to find some good aftermarket grip tapes?
@bleu_onsp
@bleu_onsp 6 месяцев назад
@@wasabitech the Pulsar Supergrip looks good feels good. They even got the pre-cut version for the DA V3, doesn't fix the funny black on white look with the white mouse though XD
@wasabitech
@wasabitech 6 месяцев назад
@@bleu_onsp Hahaha it’s unlikely there will be grip tapes made for white color ways. A transparent grip tape or “gum” color would be interesting for a white mouse! 👀
@Kenjataimu888
@Kenjataimu888 7 месяцев назад
lamzu thorn or dav3?
@tianlamian
@tianlamian 7 месяцев назад
theyre very different shapes both fill out the hand but the thorn feels more bulbous with its hump shape
@voxuuu9551
@voxuuu9551 7 месяцев назад
good review, trash shape. My pinkie finger just was in agony beacuse of that flare at the right side. So annoying when i tried it in the store.
@wasabitech
@wasabitech 7 месяцев назад
Oh man that sounds like an incredibly uncomfortable experience! There have been quite a few ergonomic mice releases this year. Xlite V3 from Pulsar is the latest. Maybe it would be a lot more comfortable for you as it does not flare out as much as the DAV3P from what I saw! Have yet to try one yet but worth taking a look :)
@voxuuu9551
@voxuuu9551 7 месяцев назад
@@wasabitech My lamzu thorn is coming today
@wasabitech
@wasabitech 7 месяцев назад
@@voxuuu9551 Hooray!!! I hope you like it😄😄 Lamzu might have done a little silent update to bring the weight down since the Day One unit that I have. Happy Gaming🙌🏻
@voxuuu9551
@voxuuu9551 7 месяцев назад
@@wasabitech Wow, it feels so premium in hand. My xlitev2 feels so cheap compared to it. And it gives me better palm contact too. Love it. Highly reccomend. Plus its 51.4 grams compared to the 52 advertised.
@wasabitech
@wasabitech 7 месяцев назад
@@voxuuu9551 This is fantastic!! Enjoyy 🥳
@warp_machine
@warp_machine 7 месяцев назад
dismal battery life its either okay or really poor based on its own mood.
@wasabitech
@wasabitech 7 месяцев назад
a mouse with a mood sounds rather interesting haha! Have you sent yours in?
@warp_machine
@warp_machine 7 месяцев назад
yep but second copy has the same issues sometimes the battery life is good sometimes its bad , so i got a gpx 2 which is clearly has some black magic battery efficiency @@wasabitech
@Nrl280
@Nrl280 5 месяцев назад
Does it work on Xbox
@wasabitech
@wasabitech 5 месяцев назад
I'm too sure if it works on the Xbox but I tried it with a PS5 and it does work! The game itself needs to have mouse support.
@DJaquithFL
@DJaquithFL 7 месяцев назад
The Razer DeathAdder V3 Pro is 'Meh' and not really a DeathAdder other by name. 240 Hz = 0.24K vs 1K or 2K .. 8K as it is at 1K the polling is 4X faster than my monitor's refresh rate! I actually have a hard time calling that, the V3 Pro, a DeathAdder. It feels like an over plasticized version or another word would be sterile. I actually prefer my DeathAdder V2 Pro w/Glass skates which is a brick but has the shape and feel that everybody knew to be DeathAdder. Now if they took the same shape and design and got it down to 60g I'd buy it! I don't know about you but I have that 8K dongle and when I upgraded it, it unpaired my DeathAdder and it was a PITA to get re-paired and running properly again. About the only thing I like about the dongle is the color indicator for the battery level. That's it. I think I'm running mine either at 1K or 2K polling and I have a 240 Hz monitor. I'm still trying to figure out why Razer's software is ~600MB in size??!!
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
Been using the DAV3 for 12 months. Absolutely love it. Best mouse I've ever owned. And it's definitely a DeathAdder.
@DJaquithFL
@DJaquithFL 7 месяцев назад
​@@the12gaugeshotty .. I've been using DeathAdder since it was wired and it's (V3 Pro) definitely not a DeathAdder other then by name; similar depends upon what your version of similar is. This is an obvious difference. It's not a subjective one .. even the majority of the reviewers to date state the exact same as I am here, it is what it is. I clearly have all the DeathAdders including this one since day one, it seems you don't. The most obvious differences are width and the curvature of the mouse button paddles are completely different. There's a saying about shape, shape of the king, It's not the same exact shape. Trust me I wish they were the same. They're not. Hopefully the V4 Pro will be a true DeathAdder Pro.
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
@@DJaquithFL this is my first Razer mouse. It's a DeathAdder. Times, shapes, technology changes. It is what it is. Razer has changed the DeathAdder and this is the future.
@DJaquithFL
@DJaquithFL 7 месяцев назад
@@the12gaugeshotty .. I don't mean to sound sarcastic but really?! You can call a Toyota Camry a Rolls-Royce it doesn't make it one. The V3 is a DeathAdder by name only. The shapes while being similar are apps of freaking literally not the same, by any of the prior DeathAdders and see what I'm talking about.
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
@@DJaquithFL comparing cars but do vehicles not change? Last time I checked, they did. Even the same make and model will change, sometimes drastically. Some things you need to move on from. This is the future for the DeathAdder. Razer isn't moving backwards from the success of the DAV3.
@ronald0122
@ronald0122 4 месяца назад
this or superlight?
@fbanget
@fbanget 4 месяца назад
I personnally have both and if you like the Deathadder shape I think it's a better mouse. Or at least I personnally feel I aim way better with it than the Superlight.
@Decki777
@Decki777 7 месяцев назад
This mouse is too big for people who have smaller than 19cm hand great shape but too big for most people.
@Ejziponken1
@Ejziponken1 7 месяцев назад
My hand is about 19/10ish and Ive been using this mouse since it came out and the V2 before that. I do however feel its a little too big. Ive been looking like crazy for the last two weeks for something a tiny bit smaller. I have the VIPER v2 Pro also but thats too small. I bought the Atlantis V2, I dont think I will like it tho, so I probably return it after testing it.
@Decki777
@Decki777 7 месяцев назад
@@Ejziponken1 I have Lamzu Atlantis 4k mini Great mouse for me because I'm a finger claw hybrid player . Atlantis og v2 4k will be good for you.
@siedhuss
@siedhuss 7 месяцев назад
@@Ejziponken1 With a similiar shape like the DAV3 but a bit smaller, I can recommend the EC2 line of Zowie or AX of vaxee.
@Gabriel-it5jy
@Gabriel-it5jy 7 месяцев назад
Vaxee outset or the lamzu thorn
@the12gaugeshotty
@the12gaugeshotty 7 месяцев назад
Works perfectly for me. Relaxed claw grip user. Been using it for 12+ months.
@fwabble
@fwabble 7 месяцев назад
NOBODY REVIEWS THE QingSui Pro 3! OML You can't find anything about that pad! *hint..... HINT* (The PRO - it's BLACK)
@wasabitech
@wasabitech 7 месяцев назад
Oh!! You are the first to mention it! I swap between the Control Mats / Speed Mats / Glass when I test mice to get a better sense of what other gamers would feel. I'm not sure when I will get my hands on the Pro version of the QinSui 3 haha! But thank you for this and I'll also leave a quick overview of how I feel about the QinSui 3 (OG) here for anyone curious about it! - Print quality and graphic looks amazing (Makes it look like a Special Edition pad) - Weave / Side stitching uses softer threads which started to fray on mine after a few months but I snipped it off with scissors and it's all good! - Compared to an Artisan Zero, this pad is much Thicker (not a bad thing I feel!) - The feel of mice on this one is kind of in-between control and speed (I live in a rather humid country so you may have a "smoother" experience in a dryer environment) - For the price... Not bad at all!!
@fwabble
@fwabble 7 месяцев назад
@@wasabitech Very kind and thoughtful, but yeah it's interesting, like, everyone seems to have the 3, but there's NOTHING at all about the Pro. I have it and it's incredibly interesting. It's the slowest pad I have ever used - yet, interestingly, there's no issue with static friction and micro adjhustements (but with the Thorn that could be due to skate design and weight and my light touch) Your content is top tier and you're a very likable gentleman and clearly very capable, just enjoy the process and the subs and views will fly in.
@Phoggishadow
@Phoggishadow 7 месяцев назад
hi wasabi
@wasabitech
@wasabitech 7 месяцев назад
hello shadow!
Далее
The BEST CS2 Pros use THIS mouse....
7:13
Просмотров 84 тыс.
Alisha Lehmann joins Juventus Women 🤍🖤
00:16
Просмотров 1,7 млн
10 Setup Upgrades That ACTUALLY Matter
9:32
Просмотров 1,5 млн
Why the Nothing CMF Phone 1 is a Game Changer.
14:44
Просмотров 2,8 млн
I bought a FAKE Razer mouse from Wish
7:25
Просмотров 605 тыс.
What did Razer do to the Deathadder???
6:43
Просмотров 35 тыс.