RC F3K DLG 1500 Building video, RC glider, Balsa construction, Carbon Fiber Bow Arrows, RC Airplane 

That build was so clean it sanitized my entire apartment 😎

Great job on the video. People do not realize how much skilled labor is required. I just finished RC glider build from a nice kit. It took about 40 hours of work before flight.

Nice work. I´d love to see it flying.

Beautiful! Thank you for the files😎

Nice Clean Design and Build-Thank you

Excellent build...I think I will build one too, but modified for slope. Great looking model.

Excellent video, many good ideas demonstrated.

I love the fact you used old arrow shafts, I have a few laying around that need to be used this way.

Looks great!!!!

The provided plans look absolutely stunning! Even as a beginner, I had no problems making sense of what I need for this build. Thanks so much for sharing! Can you please provide some information on the Carbon Fiber Bow Arrows you are using? I see there are several types available on Ebay. Thanks!

เป็นผลงานที่สุดยอดมาก

Amazing as always, great work.

beautiful great work

Ficou Excelente 👏👏👏👏👏🛩️🛩️🛩️👍

Great job as always. Tidy build.

Amazing work!

✊✊✊✊ looks beautiful, excellent job

Great job. 👍 well done

Top moumoute !

VERY COOL MATE.

espectacular trabajo, maravilloso me falta madera de balsa para hacer este proyecto....

Beautiful 😍

Very nice …… even some NIN included 😉

Great video and lovely build. I am curious though - why did you hinge your ailerons at the top of the wing (and not the bottom of the wing). Hinging at the bottom would allow for much more aileron travel, as you only need a couple MM of reflex during launch/speed and could use over 45 degrees down during landing.

great work mark I think you will inspire a lot of people to build again including me

Крутая футболка

Зачётный планер

футболка огонь)

You are using carbon arrow as the spar... hmmmm i got many carbon arrow that already broken.... i should store it the so i can build glider 😄😄😄

magnificent

How do you adjust the center of gravity? Everything looks like a pretty tight fit.

Hello Marko great idea and work. Have you thought about adapting the wings from this dlg to dlg with an electric motor where you made the wings in composite? The wing chord could be reduced leaving a span of 1500mm what do you think?. Of course, the printed fusellage unchanged.

Dear Marko, Thank you very much for sharing your design and production of your beautiful DLG. I had two questions and that is: 1. Are you sure the dihedral angle of the wings is 1.5 degrees? 2. How much weight did you use for the front of the nose? good luck

Very nice, how did you connect the wing halves, did you use any spar or just epoxy and fiber?

Superb !!!

Hi Marko. Thanks for this great design. I will set up a workshop in our makerspace to build 4 or 5 with a group. I have a question about the aileron servos which are obviously in the fuselage. how did you put them? the inner hollow part is just 10mm which does not allow to mount the servos side by side…

Thanks for sharing! Do you have any further information about the GC?

The perspex CoG stand looks great. Where did you get it ?

Nice design and simple construction! What is the dihedral angle? (or how much did you lift the wing tip?) at 8:33 ? Thanks in advance.

dunch dunce dunce the beat of the bass box

Which airfoil did you use?

Hi Marko. Cool design!. How did you do the wing joiner ? I could not see it in the video...

Hi Marko, this bird is so beautiful, I decided to build it as well, I'm about half way. What density Balsa did you use? I'm not getting near those weight readings you show, with the Balsa I got for it.

😲😳😲 Perfect :) what power is your Laser ?

Any chance of kitting this, or licensing to a kit producer. A 1.5m woody DLG would be perfect for beginners or builders who don’t want the expenditures of bagged layups. Perhaps collab with Josh Finn at J&H Aerospace?

Hi, great DLG. What is the machine you use to cut out the ribs, is it a laser on a 2D router setup? Did you draught it in Solidworks and then do slices to get the profile at each rib station?

❤

Shouldn't both carbon tube define the profile of the wing? Real planes have a stressed surface! I guess it is just a question of taste, but like wood panels on the leading edge instead of this ripped skeleton.

I think I tried everything. but the center of gravity is far behind. Thanks for the guide by the way.

It’s beautiful! How does it fly?

Nice

Felicidades en un bonito modelo, tengo el talon igual pequeño es de acrobacia, este me gustó es sencillo de construir, si no se puede enviar aquí donde vivo, el kit le rogaría qué publique un pequeño plano con las medidas y el perfil infinitamente agradecidos, un aeromodelista más.

"Oi! Ain't she a beauty!"

Преобразовал ваш фаил в корел для лазерной резки. Передние и задние кромки из карбона 3,5 мм? Стрелы пока такого диаметра не нашел, наверное подберу другие и отредактирую отверстия в макете на порезку. Есть дефекты в корел в передних кромках нервюр, какие-то черточки, уберу их. Какой клей применяете. Знаю только космофен из подходящих. Бальза есть в интернет магазинах, кроме 5 мм, но думаю еще найду. Впереди кроме серв, приемника и аккумулятора ест груз? Модель понравилась. Хочу повторить. Какие шарниры используются у элеронов и руля высоты? Какой используете рубанок, такой он острый. Супер. Все нравится.

What is OD and ID of arrow shafts?

did he hinge the ailerons with normal small clear tape?

Nice! How much does it weigh?

hello ! please What is this yellow material that you cover the parts of the plane with ??

What is the name of that blue tool / knife with which you remove excess balsa so nicely?

What is the length and thickness of Carbon Fiber (smaller and bigger one)?

Stunning. May I ask what battery and radio you used

Bro planning to build one.... Can you help me out with the process.... It would be really helpful.

Hi! How many degrees did you give of Wing dihedral?

Does it fly 🤔

also, is that a carbon fibre rod? How thick should i buy them

The trowing peg😂 never use a round one if you wanna trow some serious launches. It wil ruin you fingers But nice gentle hill sloper

Hola pregunta, como hago para comprar el kit y si me lo pueden enviar a Bolivia 🇧🇴 por favor gracias.

What is the weight of the ribs? Can it be printed from a PLA on a 3d printer

What material used for skin

Hello, what kind off glue and activator do you use and where can i buy it?

how you make a hinge in aileron

какой вес в итоге получился

What the diameter size of the spar mate?

How to get the airfoils?

Nice t-shirt, НЕТ! = NO!

sell the kit

My mom told me not to say anything about it till I fly’s

you SOOOO don't know ENOUGH.

Very fast playback andnot informative