Тёмный
No video :(

rear brake pad replacement 

Greatrydes
Подписаться 4,9 тыс.
Просмотров 25 тыс.
50% 1

2015 Can am f3 rear brake pad replacement

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@jeffcunningham678
@jeffcunningham678 4 года назад
Just followed your video to inspect/clean my rear pads. Thank you !
@DanielSantosProfile
@DanielSantosProfile 2 года назад
Thanks. Just replaced mines and the video was very helpful.
@spyderryder
@spyderryder 2 года назад
Glad to hear!
@jaymoss7308
@jaymoss7308 8 дней назад
Did you have to release the park brake first? This will be my first time changing brakes pads all the way around.
@spyderlyf3
@spyderlyf3 3 года назад
My rear piston refuses to fully seat. So irritated..had to put old pads back in and order a proper tool. Front were EZ and the EBC pads are great. Thanks for the walk thru. I though I did something wrong, but piston fully seated with old pads and emergency brake work. To be continued..
@Ralph42361
@Ralph42361 5 лет назад
Because you had a lot more inboard were you might consider removing the mounting saddle cleaning and-regressing that pin because it slides it hangs up causing the inboard to stay in contact with the rotor otherwise this is a great video for the first timer I own a Spyder RT SE6 Limited Ride safe
@spyderryder
@spyderryder 5 лет назад
I do install my pads dry. Maybe its time to use a little synthetic grease smell like I would on a car
@ThomasNappo
@ThomasNappo 5 месяцев назад
Great job...well explained..😊
@spyderryder
@spyderryder 5 месяцев назад
Thank you!
@Chubz215philly
@Chubz215philly Год назад
Thank you so much
@lmiller4121
@lmiller4121 6 лет назад
I've gotten into the habit of always using Loc-tite on any bolt that I remove on my Spyder.
@spyderryder
@spyderryder 6 лет назад
+L Miller I have it in my tool box but never pull it out!!
@CriticalThinker08
@CriticalThinker08 5 лет назад
How often are you running through a set of these EBC brake pads? Are you going by mileage or how long they've been installed? Do you measure them down to the 1mm minimum. Just curious as a new Spyder owner.
@spyderryder
@spyderryder 5 лет назад
Sorry for the response! I get about 20k miles out of a set witch is not quite a year of riding. Must of the time I dont catch them at 1mm just because the among of miles I put on the poor spyder.
@ChipperGouin
@ChipperGouin 7 лет назад
I kinda figgered that putting them back onto the rotor would be a lil pain...
@spyderryder
@spyderryder 7 лет назад
+BrianBarb Sutton thank you for watching to be honest that is the hardest part. The brakes on the spyder are nice and easy to do!
@roberterickson5274
@roberterickson5274 5 лет назад
how long does it take to change rear brake 2012 canam spyder
@spyderryder
@spyderryder 5 лет назад
30 min to 1hr. Just remeber the piston screws it does not get pressed back!
@JohnBraman413
@JohnBraman413 5 лет назад
can you bring the rotors to someone to resurface like you do a car?
@spyderryder
@spyderryder 5 лет назад
No I dont think so. I have 57,000 on the rotors with no issues
@danielstrong8819
@danielstrong8819 6 лет назад
I have a 2016 F3 and I tried the snap ring pliers and the piston isn’t going down can you help
@spyderryder
@spyderryder 6 лет назад
+Daniel Strong you need to push down and rotate clockwise.
@danielstrong8819
@danielstrong8819 6 лет назад
I did lol turned it about 20 times towards the front of the bike
@spyderryder
@spyderryder 6 лет назад
+Daniel Strong make sure the park brake is not on!!
@spyderryder
@spyderryder 6 лет назад
+Daniel Strong is the park brake off?
@danielstrong8819
@danielstrong8819 6 лет назад
Greatrydes do I need to open the reservoir to help release pressure
@FPVeyes
@FPVeyes 5 лет назад
Did you have the brakes on or off
@spyderryder
@spyderryder 5 лет назад
I had the park brake off. Then I removed the caliper removed the pads turned the piston in and reversed to the process. Does that answer your question?
@russfox2502
@russfox2502 5 лет назад
What did you do to seat the new rear pads in?
@spyderryder
@spyderryder 5 лет назад
Im just easy for the first handful of stops. After a couple firm stops from around 45 miles per hour.
@opichocal
@opichocal 4 года назад
How often do you flush the brake fluid?
@spyderryder
@spyderryder 4 года назад
You should do it every 2 years.
@opichocal
@opichocal 4 года назад
Greatrydes thanks! I’ll be flushing mine soon. We just got home from a 500 mile ride today. We Road with about 20 dual sport bikes and my spyder has never been so dirty! It was a blast
@spyderryder
@spyderryder 4 года назад
@@opichocal it sounds like a nice trip. With it being winter in Ohio my rides are down to 50 miles or so. Enjoy your spyder and stay safe
@alanmichaud2076
@alanmichaud2076 5 лет назад
if I turn the parking brake off it beeps all the time
@patlowney2834
@patlowney2834 7 лет назад
After all the problems I've heard about with Can-Am spiders I've decided to go with an American-made motorcycle. the only American-made Cafe motorcycle. what might that be. can anyone guess.
@spyderryder
@spyderryder 7 лет назад
+Pat Lowney I think Cleveland Cycles makes a little cafe!
@patlowney2834
@patlowney2834 7 лет назад
Greatrydes the word I was looking for his name is Eric and his last name is Buell. I've been riding motorcycles since I was 14 years old. I recently sold my Goldwing I've had 19 different motorcycles over the years. I'm done with those big heavy road bikes on long trips they cause you to get fatigued. So my next one's going to be a Buell. Which is a product of Harley-Davidson. Not all of the Buell models have the V-twin engine. The best models they have are the ones with the Sportster engine.
@spyderryder
@spyderryder 7 лет назад
+Pat Lowney EBR / Buell are very cool little bikes. You don't see to many of them around. I think they look great and they are very compact!
@patlowney2834
@patlowney2834 7 лет назад
Greatrydes yeah I'm thinking the buell are cool because then you can blend in with the cafe crowd and they like it and then Harley guys like it too because you got a Harley motor . And I'd like to take a trip up Highway 1 on the coast of California. And the buell would be a perfect bike to do that on. Like to go up to Fort Bragg of never been there. There's a place called Glass Beach up there. Saw a documentary about it on TV. Would like to go see the place for myself. And Buell performs very well in the mountains.
@spyderryder
@spyderryder 7 лет назад
+Pat Lowney it sounds like an amazing ride. Highway 1 is in my bucket list and I hope to do it one day.
Далее
Can Am Spyder RT Rear Brake Pads
19:24
Просмотров 35 тыс.
Мама приболела😂@kak__oska
00:16
Просмотров 821 тыс.
ОБЗОР ПОДАРКОВ 🎁 | WICSUR #shorts
00:55
Brake Pads Can-Am Spyder #howto Change Them
10:26
Просмотров 12 тыс.
How to remove the rear wheel on a Can-am spyder F3
13:50
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
Can-Am Spyder - Release The Stuck Parking Brake
9:11
Can AM Spyder Rear parking Brake - Brembo RT F3 RS
3:28
SHOULD YOU PUT CAR TIRES ON A CAN AM SPYDER!!!
14:01
Просмотров 26 тыс.
Can Am Spyder Brake Inspection and Fluid Flush
9:03
Просмотров 18 тыс.