Rebuild your Steering Gear Box

Подписаться 564 тыс.

Просмотров 527 тыс.

50% 1

Let us reseal your steering box: bit.ly/2kaZ8Lq
In this video I'll show you how to rebuild your saginaw power steering gear box. That means taking it apart, cleaning, inspecting, and replacing all the seals. The saginaw boxes are very common and came in many Jeeps, Chryslers, Chevys, Dodges, and others.
To buy a complete rebuild kit click here: amzn.to/2dQWxjG
Or to buy a new steering box: amzn.to/2du0cVz
www.bleepinjeep.com/ - All the best Off-road videos of RU-vid : Please hit us up on FB - / bleepinjeep
Disclaimer - This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for some viewers and children under 30 years of age. Please remain seated until the ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in jeep mirrors may be farther than they appear.
08893

Авто/Мото

Опубликовано:

1 май 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@bleepinjeep 6 лет назад

Don't feel like it's worth the trouble, we can reseal your box and even tap for hydro assist: bit.ly/2kaZ8Lq

@enbuscadetesorosalmacenado8962 5 лет назад

what is the charge to rebuild a gearbox

@andrewgillis8572 4 года назад

Corvair owner with huge 80 degrees of steering wheel play - column though does wobble! Already this has been helpful (lost half a turn when I loosened the jam nut - so, great catch by you in that prior video!)

@Isdersumfinwong 10 лет назад

G'day from Oz Matty.. Awesome video mate.. I read some of the comments. i'm not sure if anyone has pass this info on. Just wanted to share a little trick with the Ball bearings in the Piston housing. If you remove your Rotary valve (by turning Anti-clockwise) from the Unit keeping the steering box Horizontal you can slide the Piston out with the balls inside. When you pull the piston out have a container underneath to catch any stray ones (They usually stay inside the piston). And when reinstalling use a little grease to hold the balls in place in the guide tube and then pack the piston from one hole only starting with the next color inline to match the way you packed the tube (again with a little grease to help hold them in place). When reinstalling the Piston into the housing have the end plug removed so you can see the magic take place.. Allow the worm gear to pull the piston in and hey presto.. It's a bit easier and allows you more room to play around. Hope that help others when doing the install.. All the best for New Year everyone.. =)

@stephengeth5959 10 лет назад

I am familiar with rebuilding various types of steering boxes and have done so in the past. I have also seen various videos and tutorials on Sag box rebuilds, but I must say that this one is really clear and informative for the average person. The explanations are clear and the video itself is as well. I am sure that it will convince many people that they can undertake this project with basic hand tools, confidence and patience. Great job : < )

@ronmancvu 8 лет назад

This was one of the most helpful videos I've ever seen on RU-vid. Thanks!!!

@mgm1986 11 лет назад

I have watched dozens of technical videos and this is one of the best I have seen. Well done guys!

@strengthchain 7 лет назад

Wow! Fantastically clear presentation and explanation of what everything does in there and how to disassemble and reassemble. Thank you!

@linglingjr 8 лет назад

Awesome job. Infinitely better than a lot of the other automotive "how to" channels I've seen.

@russellsimmons9284 11 лет назад

I'll give it to ya. You never have a boring video. Always something to keep a person entertained and maybe a laugh or two Kep up the great how to videos. I've learned a lot.

@nikoskleopas5642 7 лет назад

Great video. Worked perfect for my rebuild! Keep on the good work guys!

@flyifri 9 лет назад

Can't thank you enough for sharing this rebuild. I'm just about to start my first box on a f150/94. Looking for incite on the differences. Good Job

@dadams19111 3 года назад

well done matt! I have never seen a video so complete on a steering box rebuild

@xjinit 7 лет назад

Hey just wanted you guys to know there are 2 seals for the output shaft... first is the oil seal(deepest) and the second(outer) seal is a dust seal.

@bleepinjeep 11 лет назад

yep, they are great as exercise stairs too!

@HRIservicesllcSturgeonBay 9 лет назад

Great job with the video guys, clear and concise!

@RandomStuffGarage619 3 года назад

Thanks guys! Needed the seal kit and found your link in description! Will be on my porch in 3 days!

@arthurboyd522 7 лет назад

Well done video. Thanks for showing us how it's done.

@sraike 8 лет назад

Great video! Very thorough and well done. Thanks!

@joshuagerlitzki1092 5 лет назад

Doing this rebuild....the guts of a jeep box into my 68 chevelle box that way I achieve faster ratio steering into my chevelle box while retaining my standard line hookups.....jeep box is metric lines Thanks to this video, thumbs up

@DonutGuard 11 лет назад

Thanks! That's everything I needed to know. With the Year, Make and Model, I was able to look it up on Omega's site, and then when I finally found a picture of it, it matches what I'm looking for. For future reference, it was (most likely) kit # 2780.

@Colt45mx801 6 лет назад

God Bless Bleepin Jeep. This will be tomorrows project!

@dnlmachine4287 8 лет назад

Great vid. OMG teh lulz at 10:00 when you freestyled the jacks +25 street cred. Stay gold.

@jeaservices 8 лет назад

Very well done video. I've never been into a gearbox before. I think I can now. Thanks.

@bleepinjeep 8 лет назад

+Jim Addison sure, no problem

@markszostak5808 2 года назад

Excellent video to show all the details of a rebuild. I've got leaky seals but I'll probaly just do the box replacement. Still a very interesting video.

@Kylemanwiller 6 лет назад

Very informative video Matt's thank you

@marleyprobst4374 9 лет назад

Great video guys, very professional and informative. Keep up the good work.

@MrThe302crew 8 лет назад

😘

@Finance1979 5 лет назад

Looks easy, thanks for the advice

@edalbol 2 года назад

Getting ready to do mine. More than your video available. Watched both. Yours is better in my opinion. Thanks. Ed

@Glok1917 5 лет назад

Thank You This Helped Alot I Have A 2000 Jeep Wrangler 4.0 Sport And I Was Struggling With The Ball Bearing For The Worm And Putting Them Into The Piston

@bethisreal503 8 лет назад

Very clear tear down, seal replacement. I wish that you would have touched on steering wheel play, and shaft play.(the bearing you did not take out) I was hoping you where going to talk through it.But you passed on. Which these are my box symptoms. I have very few that leaked. But all have had some degree of play at the steering wheel. And a '72 corvette that had extreme shaft play. You make great videos.

@CeDubble 3 года назад

I would pay the 2 of you to fix my truck in a heartbeat. After watching this video I’m 100% sure I don’t want to deal with my steering box... 😆😆😆😆 Awesome vid man ✊🏾😎

@Kactapuss 6 лет назад

HAHA, love the unexpected hilarity at 10:00, reminds me to have fun in between bleeping at my Jeep!

@MiguelMartinez-np8uo 4 года назад

You said that was your first time You rebuild it like a BOSS. Lol Nice video, thanks!

@rondumontier1187 2 года назад

this is the BEST you tube how to on all of how to vids out there. thanks a bunch. now i gotta go do mine

@howardrussell6738 Год назад

Excellent video. ! Very good explanation of the rebuild!! Thanks

@narcoticrex 8 лет назад

Great video, great job....after seeing how much is involved i might just buy a remanufactured box for $150

@dLikesDDs 9 лет назад

sweet thanks...helped me with a saginaw dual piston 710 box

@davetaf1323 10 лет назад

if I ever saw a perfect demo vid its this one ..........thumbs up ..........im from Trinidad an Tobago ..........hope your other vids are a blast

@webtech4161 6 лет назад

HAAAA! You are so friggin' entertaining and such a great teacher! Thanks for this vid!

@whimice 5 лет назад

Hey, great video! Very thorough, and I like the way you explain things in more detail...thanks! Quick question: What is the model number for that steering box unit? What did it come out of? I've got a leaky steering box in my 05 Duramax, and it looks a lot like that...

@ashland82391 11 лет назад

Very useful man, thanks! My box has been leaking for a bit so I'll be doing this soon.

@ScoutD300 10 лет назад

Great video. Lots of details on what to do and not do. You made it look easy, I'll find out tonight.

@bleepinjeep 10 лет назад

not sure on that one... did you put it back together correctly?

@hanj4737 2 года назад

Just finished the job using this video!! Thanks!!

@bleepinjeep 11 лет назад

I'm not sure I can give you a part number at this point. I got the kit from orielleys and just asked for a complete rebuild seal kit for a 88 jeep cherokee steering box.

@dannyr41524 6 лет назад

Thank you very much for the video 👍👍

@greg1629 2 года назад

Thought about rebuilding mine but after watching your awesome video I changed my mind. Gunna go buy a refurbished one instead.

@raysoucie489 2 года назад

Very well done----- I liked the "Intermission" Part

@stanhair3861 10 лет назад

Yes Is all correct, with cold engine power steering works great!

@walter2990 4 года назад

Just finished the steering box (Delphi) rebuild on my 2004 Silverado 2500 HD 4x4, and I couldn't have done it without Matt's help (and your channel, too)!! The ball bearings were the toughest part, and I watched, then paused, then watched, and paused the video 20 times, to get it right! Thank you both for posting this video!! I subscribed just because of that info! Stay safe, stay well, and wear a mask!! We'll get through this virus, eventually..., God willing, and the creek don't rise!

@fourwdjunky 11 месяцев назад

Thank you soo much for making this video!! It was super helpful!!

@qbanceo 4 года назад

nicely done! feels like I can do it :) good details . Could you pls tell me if there is a place where I can buy those ball bearings. 24 of them right

@davidgrube849 6 лет назад

good information and nice presentation.

@Adam-jx7eq 4 года назад

Great video , what if the adjustment screw has been adjusted?? How do you get it back too spec prior to rebuild ????

@grandpromenade6925 9 лет назад

Excellent video! Great information!

@TalesOfTwoWheels 11 лет назад

Excellent video. BleepinJeep, I am a new jeeper and I recently bought my first Wrangler TJ. I have been to trails two times so far. Can you please do a video which covers the maintenance we should after a trail run ? Just to make sure everything is good? -Thanks so much.

@AdamEwart Год назад

Searches "rebuild steering box". Clicks very first link in the results. Doesn't bother looking for any others, because what could possibly be a better tutorial than this one?? Fantastic walk thru, thanks for uploading!! 👌👌

@bleepinjeep Год назад

Thanks

@AnujChamara 8 лет назад

Bleepin Jeep.Thanks for your reply.I will try.

@kevinbartley7919 Год назад

Very well done informative video! Thanks Ya'll!

@zxtuner4lyfe 5 лет назад

Matt. For a yj, with ram steering. Would you use the factory box or upgrade to the Durango box with ram assist? You really know your stuff

@Hi_Stacey 5 месяцев назад

I ended up buying a rebuilt one but this is really cool to know what’s in it. Makes those diagrams make more sense! (99 dodge ram van 1500 5.2)

@jeeperalainbigal 10 лет назад

Super video et information, merci .

@lawrencehoward8565 4 года назад

Thanks for your help I've got a 1993 jeep Grand Cherokee that I've been working oni have to rebuild my gear box so wish me luck and how can you tell the difference on a rear axle of it's a Dana 30 or something else

@mattpolitzer2920 7 лет назад

Great video. Can you recommend a reputable brand of kit for rebuilding a 1974 Chevy G 10 Van power steering gear box? I'm looking at Rock Auto offerings. Gates, Edelman and ACDelco

@danbarasa8166 8 лет назад

micah yego thanks for the excellent presentation ................in Kenya where can i purchase the GMC sreering gear box or shaft

@stanhair3861 10 лет назад

Hey Matt great video! I've rebuild my steering box but now works only at cold engine! When hot it's very hard to move! May be ATF oil or something other? Thanks! :)

@DEN_GMC 6 лет назад

Thank you very much for the video !!!

@bleepinjeep 11 лет назад

the only thing we didnt take apart was the top cap assembly which you can see at 2:30. As mentioned if you take that apart it will be hell getting it adjusted right again. Other than that we didnt skip anything.

@WeekendHandymen 6 лет назад

Thanks for the link to the seal kit. Any info on where to get a replacement roller bearing for the output shaft?

@bleepinjeep 6 лет назад

not sure, maybe NAPA

@bleepinjeep 11 лет назад

thanks, much appreciated

@russbanonis3553 11 лет назад

Hi Matt, I have a 1990 Chero. Just wondering if you will be making a vid. on the Renix system and go through the various tests and check points? Thanks.

@RICKROCKERTHEORIGIONAL 6 лет назад

Hi Matt, Damn I screwed up. Put the collar on the casing of pit shaft for the box brace. also did the jcr strengthening plate. Got it all back together and pulled out of my garage and boom...Leaking now! ....Pretty sure I tightened the collar too tight and blew the seal.

@xDETROITxCITYx 11 лет назад

damn i got a used box for 20 bucks. im impressed that you will go through all this work to save a few bucks, well done

@sunnysacto 10 лет назад

Great Job, quality video

@Toddathon1 10 лет назад

Great video. Do you know why my steering would be harder to turn to the left than the right. All of my other steering components are in good shape. I have an input leak on the input shaft seal so i have to take it apart anyway. Just wondering which internal part would go bad and make it harder to turn one way than the other. The pump makes noise going left also. any help would be much appreciated. Thanks

@johnpenner1318 5 лет назад

Hi there, I have movement between the output shaft and the housing. So the needle bearing and shaft are worn? Adjustment on top of box won’t help, right? Thanks

@VanNess300blk 7 лет назад

The Matt Narrating the video & rebuilding the steering box sounds like Travis Haley from Haley Strategic to me...Anyone else think so? lol Also thank you for the video I am currently rebuilding a steering box for my Dodge Ram 2500 & this video proved to be very helpful.

@dissociativecat7495 4 года назад

Question: what makes the steering lose in cold weather steering feels normal after driving a bit, pump or steering box ?

@abbyrose16731 6 лет назад

Do you have a video on just changing the seal? Do you have to take it all apart?

@rafaelnascimento2592 5 лет назад

What is the best type of grease to use in a manual mechanical box of a civic honda ? thank you man

@MadMaxMovie 10 лет назад

Great video and information. Question - I want to have decently fast lock-to-lock steering with my ram-assist, and to do that I'd like to increase the 'flow' (GPM) throughput on my gearbox, and I'm wondering if you have considered ways to do that? Can orifice(s) be enlarged to enable more GPM? I would think it could be done if certain orifices are opened up. Pressure sould pretty much be the same(?), but how would one go about enabling more flow through the gearbox so the lock-to-lock speed isn't diminished? I'm using a pump that does 7 gpm and 2000 psi. - Sam

@mcss327 4 года назад

Thanks! After watching this, I'm just going to replace mine! 😄

@wolfmanrebel874 3 года назад

Thanks a bunch , I got my ol warshin machine back up to par it's got a rather similar "steering" box between the engine and transmission. I imagine many will read this with a super perplexed facial expression...and I'm good with that, Thanks!!

@kylicosmiley 5 лет назад

Would this be the same for early Toyota boxes too? They look very similar

@zeppfan1999 9 лет назад

Great imformation, thanks..

@scottl5231 6 лет назад

i have a good bit of play in my steering and a significant leak at the output shaft. my 93 xj has 250k miles. at this point will the worm gear be too worn out for a rebuild. would I be better off getting a reman box from the parts store

@Feltzm 8 лет назад

Is the 1-3" pin wrench I have going to be wide enough for this?

@Xasers 11 лет назад

Where can we find repair kit ? Thanks for this great video !

@Tricicletas1 9 лет назад

This is the most very good video. thaks

@SWBarbour 9 лет назад

Very well done video and critically helpful. Thanks! It would be useful to know the total number of ball bearings. What was the total count, 24?

@walter2990 4 года назад

Yes

@jevchance 7 лет назад

Won't grease on the output shaft seal cause it to swell?

@timeverhartofficial 2 года назад

This is a great video but I need to know if i can just replace jam nut on the adjustment for play and where can I get one? My play adjustment is rusted on i cant adjust play at all.

@emu4wdadventures631 6 лет назад

Great and clear. Thanks

@62deleeuw 8 лет назад

Thanks! Nice video! But... in the video you did replace just 1 oil seal in the pitman shaft, Correct?Can you confirm that there are in fact 2 oil seals? upper superior oil seal (followed by a washer) and a lower inferior oil seal (again followed by a washer)?Thx

@TheTileplace 2 года назад

Really nice job man

@MDC2020 5 лет назад

Why would you not use power steering fluid to lube up the casing instead of Trans Fluid?

@nikazone 8 лет назад

hey im rebuilding one on my 87 dodge ram and while i was taking it apart i noticed something like a broken spring in it, i looked at the box again and seen that where one of the fitting goes there look like a check valve if you go to 6:43 im taking about the top fitting, would it matter if that valve doesnt work?

@bleepinjeep 10 лет назад

if the bearing is bad it should be replaced. the nut on top only adjusts the backlash of the gears inside.

@abdalazizrashid 8 лет назад

great job man!

@l337pwnage 11 лет назад

Good video. The closest I ever came to rebuilding a box is replacing the pitman shaft seals in my AGR box. The seals had failed because AGR re-engineered the seal system without realizing that they are not actual engineers, lol. I just put an OEM seal kit in it.