REBUILDING 2016 MERCEDES-BENZ S550 NO FRAME DAMAGE AND AIR SUSPENSION FAULT 

Nice work Ivan your the man. Stay safe.

Great video. 100% hands on, I love that we are able to see all the work!!!

Thanks Guys for sharing the Mercedes repair update. It is leaving the factory, as only you know and guarantee that it will remain.👍👍

Great content 👌 s550 is my dream car. One day

Ivan I know that Mercedes parts are very expensive (in the UK too) so it was good that you saved the bonnet. Someone said fit the airbags first, I would agree with that. Once all that is fitted you may need to get the Mercedes man back to clear the codes using their 'Star System' but fit all you can first. Great video Brothers this build is coming along nicely. 👍

I like how you fix them the way you're supposed to instead of cobbling them together. Good job guys

Can't wait for more!

Looking very nice you two do great work! 👍

Great job on the body and fender work. Super nice shut lines.

Great work as always !

Love the videos y'all are awesome

Great progress, nice saving the hood.

Great work!!!!

Nice project!

Keep em coming gentlemen 👍

Great video guys 👍 love from Morocco ❤

You should check out Alex from Legit street cars he a trained Mercedes tech and he fixed his Car that had the same problem

The episode I've been waiting for 👏

Brillant......! Very talented 👏

Great job Michael and Ivan, that air ride is nice till it falls but you guys will figure it out. Thanks john from arizona

Hi i really like how you brothers work .you work on cars we all drive .your youtube video are real.

You guys should’ve got the 2018 update front end S63 AMG, looks way better. And if I were you, I’d wrap that car. I’d also look at an active exhaust system. That car is badass and you could max out your resale.

You guys are awesome.

Great content, good video, the car is going to look really good 👍 take care thanks 😊 .

Great Job

So far so good 👍

Thank you man!!! Good content!)

Perfect vid 😎🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿👍🏿

Love those cars. I sometimes drive the s500

tnx for the video

Check the ride height sensor linkages especially the left front one for damage- bent or broken. If bracket is out of position it will change the target height. If all look ok check the voltages of the sensors through the computer. Also look for an up button on dash. Hitting that will lift vehicle up about an inch and will show you if system tries to operate. You will figure it out

Dobra robota 🤔😎😁👍

Dude not bad 😎🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿 air Matic ant nothing once you know how look into air nots or other bags the have grate parts man I love this keeep this up 😎👍🏿

Im impressed thats ny fav car

A tip to you , here in sweden we put the bumpers in the paint booth and heat it 60 celcius in 30 min and the original shape Will be back. If you dont have one test heatgun when the bumper is mounted on the car. Have a Nice Day

Bon travaille et bon courage monsieur 😍👍👍🤝

Good job

Excellent work!! Why not heat up the bumper and bring it back to shape?

Missed seeing Michael in this vid. Mercedes is coming along nicely guys.

Love 💙

Nice car

Good job Ivan, it was not easy to save that hood.

For large repair surfaces I would use an aluminum filler putty.

Air ride is probably part of the ABS/traction control/stability system which may be connected to the air bags- probably going to have to get the new air bags installed before it will all reset.

Did you try to heat gun the bumper back into shape? Also noticed you guys hardly use air tools. ANy reason?

Great job on the Mercedes 👍 I can't wait for the Dodge truck rebuild 😃

The Humpty-dumpty-Crunchy from Mercedes-Benz Untertürkheim is coming together...!

👍👍👍👍👍

👍

I probably would have replaced the hood.

Ivan, great video, glad to see the Mercedes coming along so well! I’m sure you know that primer, paint, clearcoat, and aluminum are all designed to last for many (if not hundreds) of years, that’s why we use ‘em! Unfortunately, all of those things (and more) are now in your lungs. I know, I know…it was only for a few minutes. I love your channel, your videos, and have the highest admiration for you and Michael, so please take this as some advice from one of your biggest fans-Please, please wear lung, hearing and eye protection every time! It may be hard to imagine at your age and health, but I’ve seen the terrible impact this can have on folks, and it ain’t pretty, to say the least. And not only is wearing the proper PPE good for you, it’s the right example to set for your employees and for every aspiring rebuilder who watches every moment of every video on your channel. Best to you! -Don Kinney

Are you gonna sell this one or use as a driver ? Oklahoma may need a nice one like this !

The ride level sensors need to be checked in the live data vs the expected value, those are plastic and warp/break

Please tell me you are replacing the hood.

How are you bro❤❤❤

🔥🔥🔥👍👏

10 yil.icinde biter heralde

Heat gun the bumper

How's the Dodge submarine going?

Afterwards, will all that filler hold up on the hood with the opening and closing ???

Wassup

Go get a used bumper,hood need to be hammered out on edges

Where is the video on the disabled car?? 👍👍🇬🇧🇬🇧

😃👍

What do you do with the cars, do you sell them?

كم كلفة السيارة مع التصليح

Правильно, килограмм шпаклевки и поехали. Зачем заморачиваться .

Who is working on this?

👏👏👍👍👊👊🙏🙏

I wouldn’t doubt that hood was 1200 if you had to buy it.

للبيع ياصديقي

Hope you guys have dedicated tools for aluminium, if not, big trouble within a year of bubling on the repair area...

First coment

No bgm

When you use a torch please dont melt your tires. just saying

Bodywork never could do it too picky. just saying

you havent had this on a frame machine to see if the frame isnt tweaked just because the parts go back together doesnt mean a thing

Put a mask on please

Ok, I'm not the typical Merc fan. But, man, this mammoth is really ugly ! Plus, the typical upper crust customer of these won't buy a 6 years old exemple ! Maybe a dope dealer will. Hope you get your money back on it !