Rebuilding a 2017 GMC Terrain that should not have been totaled 

You do excellent work. You should shorten your narrative and avoid sarcastic comments

I love the longer videos please don’t shorten them. And don’t shorten the sarcasm. Lots of learning is good. And sarcasm is absolutely required.

You always impress me with the extend that you go with your repairs. Honestly there are very few that would go to that extent to repair that damage. They would pull or hammer things out close and then bondo the rest and call it a day. With you it ends up as good as new, maybe even better. It is no wonder that you vehicles are sometimes sold before you even have the repair finished. 👍💯

Y'all dont be deceived , He is so skilled , he makes the job appear so easy!!!!

One of the reasons I watch your videos is getting to watch your skilled workmanship. I learn a lot and live vicariously. I'm hoping the music and time-lapse was not serious and won't be around much.

That donor car montage was majestic.

I thought this was an Auto Body and Auto Mechanic Works Channel you do some of the best work I have seen watching you for almost 2 years now forget the music and by the this is your channel you do and say whatever you want much success to you keep up the great work

I love the sarcastic remarks folks make it gives him free ammo. This is one of my favorite channels

I've been a mechanic and DIYer all my life(also known as poor), I'm not sure if you know how much you teach and help. I'm here to tell ya the tricks, tips, tools ETC... is priceless. Thanks. Oh and I LOVE the sarcasm!!!!!

I always eagerky look forward to each new episode and have grown to appreciate your droll sense of humour. Your presentation is not only informative, but greatly enjoyable. Please don't listen to the nay-sayers. Remember: the definition of a drama-critic is one who cannot write, direct nor act in a play. Keep up the good work!

I was able to use some of the straightening and stress relieving techniques you taught me to straighten the fender and top step on my tractor. Someone hit a stump 🤷🏻. You can teach an old dog new tricks

The king of dry humor! I love the comments you make.

SARCASM? I don't hear no stinkin' Sarcasm-I hear love of what I do. Thanks Scott-always a treat! Rich

"SARCASM? I don' hear no stinkin' sarcasm! I hear love of what I do!" 😂 Thanks Scott,always a treat! Rich

The sarcasm is strong in this one.. keep it up Scott.

Definitely a lot of work removing parts for painting. A lot of people would just mask things, which makes it obvious that a repair was done. With doing it properly like you do, it looks OEM. Looking forward to your next video. All the best from Queensland Australia.

Nice work. Appreciate the sarcasm and high standards you work to.

I'm just a mechanic so I'm not reading a body man. But I'll bet you a lot of people just fix that outer skin straighten it and oh it's fine now!! That's not your way to fix stuff!! Super great Job!!!!! All the best from Canada

Fastest 26 minutes of my day - your videos. Testament to how much you cover in such a short time. Well done. This Terrain will come out like the last one - looking great and be reliable transportation for someone. Looking forward to next Friday's completion.

Nobody could ever accuse you of cutting corners! Always a very thorough job! Great work Scott!

Props for the die grinder. Your time lapse music sounds like a country western video game from 1985.

Well at least you got a workout manually repairing the frame! Always like your integrity!! Keep it up!

You do excellent work. Please lengthen your narrative and add more sarcastic comments. Well done as always, thank you.

You really do an excellent job of hiding your trail and others that have passed through previously,thanks for another great video🤗😎🤗😎

I love his narrative! should have been a comedian, love it, don't change a thing.

You do it the rite way after your finished the title should be clean again also I been lucky I bought many rebuild vehicles for my personal use but never repair the way you do it but I was always happy whit my total loss vehicle never add a big problem with them you go overboard with everything keep up the good work enjoying all your content especially this one because I own a 016 GMC Terrain thanks

I listen to these while at work driving, best part are the love taps at the sheet metal.

Sarcasm Friday….Never miss an episode!

please. No music. Thanks. I like your work and your commentary. I've learned a lot.

The Best quality auto body repair on the Tube/or planet! Scott cuts no corners to Quality down to the finest details. Very Talented and always demonstrates doing it the right way. Keep up the Great work Scott!

Like someone else said, you do excellent work but unlike him I appreciate the narrative and the sarcastic comments...they elicit some laughs and laughs are always good.

Aren't you going to introduce us to your new body gnome Manuel Labor? Just kidding. Ignore the trolls trying to tell you to shorten the narrative by omitting the sarcastic comments. Screw that. The sarcastic comments are a popular highlight of your channel. More haters tears. Love it! Thanks again Scotty. Trolls? Pile!

Watching the past few years I never thought you could cease to amaze me.. then there was music..lmfao. Scott you made my day! Been my wifes nurse all week. Thank you for sharing. Have a great weekend!

Being born left handed I can use all tools in either hand due to always being told from a very young age to use the “correct” hand! It’s really handy sawing wood or painting as you never have to reposition anything, just change hand. Can’t write with my right hand though.

Amazing how easy the playdohnium pretty much every vehicle is made from these days can be manipulated with some simple tools and a little arm strength. Yay automotive technology! Great video Scott, have a great weekend!

I'm a fan of your videos the way they are. I like the fact you don't play music like alot of other RU-vidrs. Keep doing what you're doing 👌

My first car i ever bought had bondo on the plastic bumper and after a few years the bondo all started cracking and falling off, i hate bondo, love watching how you repair cars, i am trying to fix mine up now again as i blew it up

Solid progress Scott! I'm uploading right now!

The best part of every Friday. Thanks for the video Scott.

Always love to see your current Video postings. Thanks Scott. Happy mother's day pizza girl.

Another great video. I look forward to seeing the next and the next.......

LHHS: Left-handed-hammering Scott

Good afternoon Scott and thumbs UP !!

Your work is amazingly professional! a joy to watch!

I knew our technology was listening to us - but mind-reading interactive RU-vid videos from vehcor?? Right after I was thinking, "where do you get a spot weld breaker like that?" you answered on your Amazon store... whoa. 😆

You do excellent work.

Thanks Scott and not having a 10000 piece puzzle 👍👊👨‍🔧

I hope you have a great weekend @vehcor!

7 months out from Christmas and your already giving hints, Sir I like your style🎁

Great time lapse (although regular speed is my favorite). Next time it would be great to see super slow motion. Be really careful with the sparks flying all over. We don't want your shop to burn like all the food processing plants are.

As always great work. Totally enjoy the work and narrative together. Gives me ideas for my employment at a tech time study writer. Get the work done and go back and explain. 👍

Dye grinder is one of my favorite tools great job 👏

Calling people you work with "gnomes" is a great team-building strategy. Especially when repairing valuable, well-built, high-quality GM SUVs.

Over caffeinated Scott was entertaining!!

Always enjoying the content, I hope some day he runs out of GMC Terrain parts to provide a variety or change of scenery. Considering this build is a near identical replay. Over and Over and Over. Repetition makes him a better person. If you don't learn it the first time keep trying. He's trying hard. Bravo.. No don't rebuild a Bravo.

I just loved the music…lol

Always a good show. Like the regular posts.

Very nice work 👍👍

19:55 Mr. Spotty's long lost relative.

I'm just completing estimator training and getting into CCC One estimating software and associated notes. This is aimed more at people who want to follow in Vehcor's footsteps (like me). From what I have seen, the proper GM sectioning procedure for the dogleg is to remove the entire quarter panel, sectioning it through the rear window below the roof. I would have to check notes on Monday as to whether the skin is high-strength steel (HSS) or not. Probably not as the skins are usually stitch-welded, and that requires more heating than HSS allows. If it's not, you can probably get away with this repair without compromising anything. I'm betting the wheel house is not HSS and can be sectioned anywhere. Generally, parts that are crushable are not HSS while the "roll cage" members will be. All the same, it's a tough call for skin metal and I don't know of a way to tell by looking. Mfr. specs will tell you or call your local dealer and ask. Good call on the inner parts though - those parts should be removed entire as ALL the rocker steel is HSS and should never be sectioned. I also noted your B-pillar replacement on this or another similar car was by the book. Anything less compromises structural integrity. Quick note of something I was alerted to two weeks ago - a new rule from Subaru says that any dents big enough to require quarter panel replacement that are within 100 mm (4 inches) of the roof is an automatic total. Note to self: Avoid Subaru from 2021 onward. The reasoning is that the roof will have to come off, and the labor involved makes the job expensive enough and compromises structure enough that the car would be considered unsafe. Dents can be filled, but any wrinkles, folds, or overlaps are a DNR. NOTE TO THE NOOBS: 1) There are parts of a car that may be boron steel. Those pieces are NOT repairable and must be replaced in their entirety. 2) HSS has restrictions on welding. Generally the metal outside the immediate weld area cannot be heated past 650 degrees F for more than 90 seconds (max) in two cycles in the same area without compromising the strength. Weld once and do it right. Don't heat it to shape it if you can help it. It can be hammered back to shape. Be sparing with the heat. 3) Unless you can find otherwise, assume that any frame member is HSS or Ultra-high strength steel (UHSS) and must be replaced whole. Front and rear frame rail ends are a possible exception and do have (generally) manufacturer-approved areas for sectioning. 4) Any frame rail that is kinked or bent is an automatic replacement, even if pulling straightens it. It has bent once. Its crushing strength is compromised and may fold up worse in a second accident. Vehcor has been very good about replacing crushed frames. Don't take chances. If in doubt, replace it whole. Link shows GM-specified lines for quarter sectioning. www.gmpartsonline.net/v-2013-gmc-terrain--denali--3-6l-v6-gas/body--quarter-panel-and-components

Great work! Glad the "bumper install tools" are in good shape and working good! Happy Friday Scott!

I'm calling the time lapse segment music, electric Hill Billy.

Como siempre desde que veo tus vídeos un trabajo municioso y excelente . Saludos desde Perú

I love the music!

Love the show. Great learning experience. Thanks 👍

I happen to love the sarcasm and sort of witt that harbors it... I been there.. No way that you could do this as a first timer... doing those removals is fascinating to me just how much phony plastic people buy thinking they are hot stuff.. I miss that bumper on my family ford car that had all the shiny chrome and bumper guards. It was the sixties and anything else would just be wrong

You make it look soooooo easy! Your impact drill identifies as a torque wrench? I'm dying... LGB!

They weren't shy on those spot welds. lol

Home runs all the way around Scott! You know I saw that one piece of masking tape on the drivers side you pulled off. I thought it might have been member of Mr Spotty’s family. 🤪

When i was at the ford grage they had a recall for bad arostar welds in the chassis they put 250 poprivits in the chassis

love your work

Great job

Most car's that have structural damage like that are scrapped here in Australia, great job all the best to you and your loved ones

Not certain how I feel about the 'music/time lapse' addition. One of the reasons I enjoy your videos is the work and the voice over explanations. Including all those sarcasm gems! Don't need music to see quality work being done. Going to be another cherry vehicle when you're done with it!

Great Job!!! Thank You… :-)

I was waiting something like Benny Hill for those timelapses with music.

Thanks fir the video🙂

Hey Mr. Spoty should do a video from his view point.

The world had found out Scott's other side gig. DJ Chrome Dome?:)

Thank you

Great video 👍👍👍😎😎😎

Who needs a frame rack when you've got a sturdy wall to use instead?

Great content as always 👍

Real snap together car

7:39 I like your humor 😂

Again another great work Scott . I want you to know . We are proud of you because you represent Chicago our town . 👍👏👏👏. I will wait for the right car . As I told you before. 911 😃

Great content as always

I remember the days before the magic eraser what a nightmare

Today's cars fit together like a Lego set!

Hello Scott it's your day buddy .

Love the videos keep it up 💪

With all the work you do, how do you make anything on these?

Time lapse music was like having battery acid dripped in my ears, 🤣🤣

Lol 😆 🤣 😂 awesome choice of music

This is why I'd buy a vehicle from Scott - what you can't see is also fixed right. Please continue with long narratives and increase of sarcastic comments 👍

Scott’s door removal service….

well, looks like the Terrain from Scott's Terrain Emporium that donated its passenger side B-Pillar for the last Boring Build (the 2017 Terrain Denali) is donating another part for the current Boring Build!

I honestly never realized how much removal/disassembly was required for painting. It's like the bulk majority of this repair was just removing everything to get the paint corrected.

Hi, what’s the substance on the Small triangle panel is it an anti vibration foam or something. I was wondering what did as you left it on.

Where do find all those weird body clips trim clips etc assuming they aren't in Scotty's insert_model_here emporium ? Finding replacements when someone has been there before and broke em off and or not left the old ones is more work than almost anything else.