REBUILDING A CHEAP BLOWN MOTOR AUDI S4 | PART 2

Подписаться 17 тыс.

Просмотров 6 тыс.

50% 1

I'm rebuilding this 2014 Audi S4 that suffered catastrophic engine failure and blew cylinder 4. It's been 8 months since we have pulled the blown engine, and it's time to get her running around and back to her former glory! I need to hear the whine of that supercharger again!
PART 1: • REBUILDING A CHEAP BLO...
OBDEleven: obdeleven.com/...
Code: NEED4BUILT10
Hit that like button, leave a comment, and subscribe for more upcoming content! Thanks! PT 3 Coming SOON!
Follow me on Instagram:
/ con. .
Want me to build your Audi into a beast? Send me an email:
needforbuilt@gmail.com
Curious to see what I use in my garage?
Check it out below. If you purchase anything from the links below, you're helping support Need4Built. I appreciate it!
M12 FUEL 3/8" RATCHET 2BAT
amzn.to/3U53W2x
CRAFTSMAN Digital Torque Wrench, SAE, 3/8-Inch
amzn.to/3CZuvP6
J&R Quality Tools 20pc XZN 12 Point MM Triple Square Spline Bit Socket Set
amzn.to/3zsnLZb
AMM 10-Piece Precision and heavy duty Pick & Hook Set
amzn.to/3NlQcxq
Pry Bar Set Heavy Duty, Thicker Hammer Strike Cap, Angled Tip, Mechanic Hand Tools for Automotive, Demolition, Nail Puller, Crowbar
amzn.to/3DM4AMg
4-Piece Large Magnetic Parts Tray Set, Stainless Steel Heavy Duty 9.5"W x 5.5''L Square and 4.5" Round Magnetic Trays
amzn.to/3DJJbmX
Auto Trim Removal Tool Set (No Scratch Plastic Pry Tool Kit)
amzn.to/3FsjUPy
LEXIVON XZN Triple Square Spline Bit Socket Set, Premium S2 Alloy Steel | 10-Piece European Style M4 - M18 Set
amzn.to/3VN4awe
LEXIVON Master HEX Bit Socket Set, Premium S2 Alloy Steel | Complete 32-Piece, SAE and Metric Set
amzn.to/3VVpAr5
LEXIVON Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Star T8 - T60 Set
amzn.to/3N60r99
LEXIVON E-TORX Socket Set, Chrome Vanadium Alloy Steel | 13-Piece Female Star Socket E4 - E20 Set
amzn.to/3zazr2x
SAS Safety 66519 Raven Powder-Free Nitrile Disposable Glove, X-Large, 6 mil Thick (Pack of 100)
amzn.to/3DcU8gK
Permatex 25217 Fast Orange Pumice Lotion Hand Cleaner, 1/2 Gallon (64 Ounce)
amzn.to/3Spt02m
RodeWireless GO II
amzn.to/3CUxb0e
SmallRig 72" Video Tripod
amzn.to/3CPaKda

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@Need4Built 7 месяцев назад

☆OBDEleven: obdeleven.com/?aff=1175& ☆For a 10% DISCOUNT on ANYTHING, type in NEED4BUILT10 in the add discount code section!

@jj-tq4hx Год назад

I have this motor on my A6 and regardless of being the older motor compared to the new Turbo Vs, still proves to be a great project alternative. Thanks for the vid and love to see new content on the TFSI supercharged.

@Need4Built Год назад

It’s an awesome engine that is arguably more reliable.

@SuitedUp2The9s Год назад

Well done David! Great job preservering and following it through to the finish line! Excited to see more of what you do with it!

@Need4Built Год назад

There are plans in the pipeline however we’ll see! PT 3 coming soon. Hope you saw that ending 🫢

@SuitedUp2The9s Год назад

@@Need4Built I did see the ending! Watched start to finish 😃👊

@Need4Built Год назад

@@SuitedUp2The9s I should start paying you at this point 😳

@joserivera7694 9 месяцев назад

Thank you for this video I did this today took the engine out np, just had a small issue with the mounts taking the engine out but work out, thanks again

@Mazzerants Год назад

Even though the EA839's are a powerhouse its still good to see people enjoying the EA837. The old 3.0T is not done yet! Fun things in the works.

@Alonso_99 Год назад

We need more S4 content 🔥

@Need4Built Год назад

More in the works! If you have an idea’s feel free to leave them with me 😁

@scottyboy8211 Год назад

Looks great imma need one of em one day

@Need4Built Год назад

I want a second one 🤣

@fredzimmer8626 Год назад

Great video and it just goes to show that despite you owning a low 10s 3.0L Turbo the Supercharged 3.0L just hits different ! I still think it's going down in history as one of the best.

@Need4Built Год назад

Probably going to become the new b5 platform in the future. I agree. The b8.5 is timeless.

@defmiino Год назад

Your content is great man, i'm here along for the ride! :)

@Need4Built Год назад

Thanks so much for the support! 💪🏼 hope you see you at the 1Mil mark also

@JuergenGDB 8 месяцев назад

Honestly I wish I had time to rebuild my engine. So I bought a new one. Could not part out my low mileage S4 due to some mechanical freak of nature. 30k for a brand-new engine installed..but I think it is worth it. 20k+ of mods etc and a new S4 stock or even used is between 35-70k Nice job on the rebuild

@Need4Built 7 месяцев назад

Yikes. thanks for watching

@marcakaskillzyahoo Год назад

Nice job! I'm surprised you did the test pipes but didn't upgrade the pulley and motor mounts while they were easily accessible

@Need4Built Год назад

Would be a good time to make that happen however my plan was to keep the S4 on a stage 1 tune. At least for the mean time.

@dom_says Год назад

Nice work, impressive video! I love how you show the entire process of learnings as well. For some reason I'm afraid to get that deep into a car even after building computers and enterprise network racks for years - so mad respect for you getting your hands dirty for us all to see. Can't wait to see the B8.5 in action - I loved mine too.

@Need4Built Год назад

This being my first engine swap, definitely learned a lot. It was a massive learning curve in every aspect. Something I never thought I would do but had too! Really happy I gained all the knowledge just from this car. I’ll probably end up doing an entire video about the story of this S4 and how I went from not knowing anything at all, to engine swapping it. Crazy stuff. Thank you so much for the support!

@dom_says Год назад

@@Need4Built Hell ya! I also agree that supercharger whine is addicting. It’s also awesome to see companies still pushing these engines and releasing new products.

@Need4Built Год назад

@@dom_says Can’t wait to see what else the b8.5 platform will bring us. 💪🏼 some really cool products in the pipeline

@matthews6216 Год назад

love my Merc Racing HX!!

@Need4Built Год назад

Wish I got one! They’re still out of stock but will be back soon. The S6 HX is massive!

@clintbradley433 Год назад

Nice work Brotha! 🤙🏽

@Need4Built Год назад

Thank you! 💪🏼

@clementparker5015 Год назад

Great video man.

@Need4Built Год назад

Appreciate the support!

@davidmusiyenko4158 Год назад

Awesome video! 💪🏼

@Need4Built Год назад

Thank you so much! 🚀

@elihere1242 Год назад

Love to see this car on, any mods on minds?

@Need4Built Год назад

Well currently it does have quite a bit on it, stage 1 tune, test pipes and downpipes, meth injection, some 034 hardware. We’ll see what happens with it! 😁

@TehAnalog Год назад

Nice job!

@Need4Built Год назад

Thanks so much! Hard work beats talent 💪🏼

@hjaniel4428 Год назад

Nice job bro 👍

@Need4Built Год назад

Thanks for the support 🙏🏻

@MatiasGonzalez1 Год назад

that ending bro lol. like fuckkkkkkkkkk

@Need4Built Год назад

Cliff hanger 😉 Guess you’ll have to wait for part 3

@swift__ Год назад

Nice work man🤜🏻🤛🏻 definitely a daunting task initially.

@Need4Built Год назад

Thank you! One step at a time.

@JB_287 Год назад

Incredible job! What resources were the most helpful when you got stuck on something? You've inspired me to take on bigger jobs in my garage. Love the SQ5 content as well.

@Need4Built Год назад

This comment deserves a trophy. Pulling the engine out, and vice versa I definitely had a few things I wasn’t so sure of. Thankfully the B8/B8.5 S4 Network is a great Facebook community that tends to be a great place to ask questions. I also had a few Audi buddies who encouraged me and kind of walked me through the steps over the phone as well. I don’t recommend an engine job without a lift lol. However I’m so happy to hear I influenced you to do your own things! Every enthusiast should be able to wrench by themselves. I suggest the Facebook communities and the Audi forum. Good places to ask questions for sure.

@suzanneklapiychuk1069 Год назад

Nice 👍

@Need4Built Год назад

Thank you!

@macdaddy1234ism 8 месяцев назад

Epic 😮🎉🎉

@Need4Built 8 месяцев назад

Thanks for watching

@LastHumansGarage Год назад

did you say $50 for that little U clip?

@Need4Built Год назад

Tell me about it. I went to my local Audi dealer because I wanted it right away, 45$ before tax. 😳

@chicken4597 8 месяцев назад

great job impressive work, wondering how many hours of work the engine swap took berceuse the question i have is i got the s4 2014 need engine swap and i was quoited $2500 Canadian for it and i was told its a 27hrs of work in total so am not sure if the numbers are right not sure if that a good price for for engine swap anyone can respond that would be great if getting charged that much is right

@Need4Built 8 месяцев назад

Took me much longer than that honestly based on the fact that it was my first time doing a swap like this, plus I replaced some parts on it, and then had it do it in the cold outside even in the snow on Jack stands with barely any space to work with. If I was to it now, with experience or really any shop was to do an engine swap, all said and done with labor and parts 2000-3000k USD is very fair. It’s a TON of work and it needs to be done right.

@chicken4597 8 месяцев назад

Thanks@@Need4Built