After you put down the sealant, I'd recommend pulling the tape while it's still wet and then running your finger along the edges of each side so that you don't end up with raised edges.
I have only ever rebuilt 3 piece wheels once. My old S15 had Ganador Passion wheels and one of the rears had a slow leak. Was a bit stressful but I know what you mean about getting the silicone perfect.
Brother Mike youve got a flat spot in your outer barrel... After you pull the tape and are rolling it back and foward look at the right hand side lip its very noticeable 11.18 - 11.30 in video
It’s cracking because ur literally riding on the rim u can see the back lips is thrashed also it’s because you have a heavy car on a camber . You can except to continue to have issues with that janky set up
Could you use a torque wrench to take off the bolts and see how many pounds that takes? Then tighten the bolts to whatever it took to take them off or do torque wrenches not work like that.
With a digital torque wrench you could see roughly what they were torqued to, but using that torque is not the greatest idea. You always want to find an actual spec if you can, they might have been torqued to the wrong spec before or could have loosened a bit over time, giving you a bad number.
Anytime running any camber more then -7 with a 35 sidewall tire you will crack barrels 100%. I’ve been running -10 plus camber on my last two builds and once I stopped running 35s and switched to 40s I’ve never had problems. Very confident due to experience. Ig: Saucin_s2k
Wheel rebuilding isn’t hard. People get scared when they buy wheels and they are cracked. I learned by myself and took my own apart. You can flip wheels like that
Those tires are stretched so unsafely you're going to kill someone one of these days or injure yourself due to your lack of knowledge it might look cool but it is super unsafe your not the only person on the road
How the hell did you end up here??? Also. If you see this vehicle out and near you just whip your wheel towards the curb and floor it and go home to be safe.
@@j.a.r.family2576 well when he or someone with unsafely installed tires kills ur kids standing on side of road or takes a car load of people out that's were I Com from reality any one with half a brain can see the tier isn't seated on the bead wat would I know tho I only installed tiers fr allmost 15 yrs everything from small passenger vehicles to transport trucks tires are supposed to be installed by licensed personnel
@@toddsupraman7609 tires don’t just fly off in to the wild when the bead breaks. It’s the same feeling/result as a flat tire. I run more stretch them him in this video and had that happen to me 2 times over the years. I pulled over and put a spare on and went on my way
