Reclaimed Oak + Walnut Cutting Boards

Подписаться 284 тыс.

Просмотров 42 тыс.

50% 1

I mill down oak from old barrels and add in some walnut to build 2 "brick wall" style end grain cutting boards. Both end up being around 16" x 20" and 2" thick. There's a lot of steps to cover and no shortage of action in this video as I walk you through why I do the things I do in my shop. Timestamps included below if you want to jump around to specific parts. Please consider subscribing if you haven't already done so and if you feel you've gotten some value out of this, please consider further supporting this channel through the Thanks button. I'm happy to answer any questions in the comments.
Enjoy the show!
Ryan
▶️ Support this channel
SHOP BOARDS: www.westcoastboards.ca/shop-1
PAYPAL: bit.ly/3NOhbBO
CRYPTO: bit.ly/3u6Zx4s
▶️ Follow me
Instagram: / westcoastboards
TikTok: / westcoastboards
▶️ More of my videos
3D Patterned Coffee Table
y2u.be/npjxCYLcuFs
3D Patterned Cutting Board
y2u.be/Jrh_g79Rzh0
From Barrel to Butcher Block // Woodworking
y2u.be/uiu0Hkd6mb0
Optical Illusion Cutting Board:
y2u.be/S7qLC-lUwHI
Links to products used in this video:
3M Cubitron Ceramic Abrasive 6" sanding discs: amzn.to/3ScCsaD
Festool Rotex Sander: amzn.to/3vDPkfZ
Freud Glue Line Rip Blade: amzn.to/3iW1gE5
Diablo 80 Tooth Fine Finish Blade: amzn.to/3AOU1Up
GRR-RIPPER 3D Push Block: amzn.to/3xVopuF
Gravity Heel Kit For GRR-RIPPER: amzn.to/3D08oHI
3M BlueTooth Hearing Protection: amzn.to/2VVVB8v
Silicone Glue Brush Rockler: amzn.to/3yZumrH
Framing Square: amzn.to/3iXIFrn
Metric Tape Measure Stanley: amzn.to/2XvzKox
Router Flattening Bit Freud: amzn.to/3CZu9qM
Juice Groove Router Bit: amzn.to/3zlfhkz
Pipe Clamp ¾” Bessey: amzn.to/3iV9KLL
F-Style clamps Bessey: amzn.to/3k2KhPL
Titebond III Glue: amzn.to/37OE44p
Camera Tripod: amzn.to/2XCxT1q
Sony A6400 4K Camera: amzn.to/3hRPR78
Iphone Tripod Mounting Bracket: amzn.to/3m8pptb
Belt Sander Makita 4”x24” : amzn.to/3g95WEY
Time Stamps
0:00 Intro
0:28 Milling oak until ready for 1st glue up
4:42 Mill/glue/sand/crosscut walnut
9:54 First panel glue-ups & planing
11:28 Second glue-ups & belt sanding
13:30 Crosscut end grain strips at table saw
14:55 What is Super Thanks?
15:55 Final glue-ups
18:16 Flattening/belt sanding/trimming edges
21:04 Juice grooves & fingerholds
22:24 Sanding process
23:40 Oiling
24:05 My opinion on using oak in cutting boards
25:20 Wax & Feet
25:58 Some of my philosophy
27:00 What I'm working on next

Развлечения

Опубликовано:

10 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@levimcardle100 Год назад

I watch a lot of carpentry and woodworking on RU-vid, I'm 17 and have attempted to pursue it as a hobby in school etc, I've always had a huge appreciation for it. I discovered your channel today and just absolutely loved your work and the effort and time that clearly goes into your videos. Thank you for sharing your work with us!!

@ryanhawkins Год назад

You’re most welcome! Glad you’re getting some value out of them. I encourage you to pursue woodworking in whatever way you can. 🙂

@FiglioBastardo Год назад

Keep on keepin' on Levi! It's great to hear such a young buck having such an appreciation for woodworking!

@neiljackson8313 9 месяцев назад

Hey Ryan....just built a glue up jig like yours out of scrap wood and old pvc....cant wait to give her a try!!

@timelessroyalestudio 11 месяцев назад

God bless you mate for the last few words ar the end, and may God bless you and your work forever

@ryanhawkins 11 месяцев назад

Thank you kindly!

@brigandboy1425 Год назад

Happy I found your channel. You have a very straightforward way of describing your methods and techniques, a good sense of humor, and a positive attitude. Makes me excited to keep making my own stuff.

@iamwhoiam4410 Год назад

Excellent work. We've been using oak, yellow pine, larch, popular, maple, cherry, cypress and other woods making boards for over 40 years. Sold many 100's of boards, given away boards and have never once has anyone gotten sick from using one of our boards. There's nothing wrong with using those woods. We don't use walnut or any nut woods nor imported woods, domestic woods only. Thanks for sharing your work.

@ryanhawkins Год назад

Thanks for watching and for sharing your experience.

@631rosie Год назад

Love how you manage to make such awesome stuff without a workshop full of fancy machines

@ryanhawkins Год назад

I do the best I can with what I got!

@aldopine Год назад

Ryan the cutting boards look exactly like miniature brick walls❗ Great job 🙂

@ryanhawkins Год назад

Thanks!

@joeschaefers597 Год назад

Great speed, nice explanations, overall relaxed and great results.

@dutchwalters4450 Год назад

Ryan, I'm a new subscriber long time woodworker. Building highboys after 66 years in the shop is becoming a thing of the past. My lathe is my go to tool but my interest in cutting boards is getting stronger. Like your attitude and if you give me the nod I will use it in my opening remarks as I teach others the how to of our trade. Great video.

@ryanhawkins Год назад

Of course!

@bradymcphail9690 Год назад

I’m very grateful that I found your channel sir. I was just looking for a how to make beautiful designed end grain Butcher Blocks and Bread Boards. You’re awesome! Thank you for sharing

@ryanhawkins Год назад

Glad it’s of help to you!

@13daniel1974 Год назад

Thanks! You are an inspiration to someone starting out.

@vbaspcppguy Год назад

I've watched hundreds of wood working videos and I've never seen somone use the saw backwards like that. It solves a huge issue. Also, the reason I avoid oak in cutting boards, I still use it now then, is that leaving metal on it with moisture will bring out the tannins and cause black stains. It's on my list to make a small solid oak end grain board and do the vinegar and steel wool thing on it to turn the entire thing solid black and see how the black layer holds up to use.

@ryanhawkins Год назад

Sounds like an interesting experiment!

@bennyloewen3982 Год назад

Amazing to watch and see end result. I have a large amount of white oak that was a very cheap barn find and now I have idea what to do with that material. Really Enjoy your content.

@ryanhawkins Год назад

Thanks!

@michaellienhoop2387 Год назад

Really beautiful. I love this boards. I might try myself to make some. You are a big inspiration.

@ryanhawkins Год назад

Glad you enjoyed the show!

@irishcommie Год назад

Love the look of the “thinner brick” for the style 👍

@ryanhawkins Год назад

Thanks!

@tknyte Год назад

Love your work man! You have the same table saw as me and a very similar planer and watching what you do always inspires me to go get back in the shop and keep learning and creating.

@ryanhawkins Год назад

Glad you enjoyed it!

@norwoodaerialimaging9795 Год назад

Another great video!! Keep the content coming!!

@madziar160 Год назад

Fantastic job, Ryan! I've been subscribed to your channel for a few months now and I love your work. It's always a huge dose of inspiration. Actually, I'm getting ready to start my woodworking/DIY channel and at the moment I'm finishing the restoration of a 60-year-old jointer (which will make my first video). Tomorrow is the last day: assembly. And my idea for my first woodworking video is making a couple of end-grain cutting boards. What a coincidence. I already have a stack of 10-yea-old, unused white oak parquet boards which I'm going to repurpose into those boards. I hope your video is a good omen. :) Thank you for the inspiration and making me feel like a copycat! ;)

@ryanhawkins Год назад

Your comment brought a big smile to my face, so glad to hear I’m being of service to you! All the best to you and your upcoming channel 🙂

@brosselot1 Год назад

Awesome video, I build all my cutting boards out of many different types of wood, and White Oak is a large part of all of them. Been doing it for years, also use a lot of reclaimed wood. I like the barrel idea will have to get a hold of the couple of distilleries we have around me.

@ryanhawkins Год назад

Thanks for watching!

@devinredlich7011 Год назад

Thanks!

@jimking9646 Год назад

Very Nice

@almirgermano583 Год назад

Inspirational! Thanks!

@ryanhawkins Год назад

🙂

@m.a.562 Год назад

Great work...and wishes from germany 🇩🇪

@ryanhawkins Год назад

Thank you!

@tinchobarros Год назад

Thanks

@wavehaven1 Год назад

Great boards !! Great Concept. Alot of hard work is never fast and easy. As you can see, White Oak is used for Wine Barrels for a very good reason, its harder than Teak. Cutting boards need to be cleaned with Bleach or Alcohol, rinsed and re oiled because Foul Funk can grow anywhere on any wood especially with Meat and Fish.

@jacqueslevard7218 Год назад

Bonjour et bravo de France. Ou comment un artisan devient un artiste !!! Bonne continuation dans votre métier. J.

@ryanhawkins Год назад

Thank you!

@DanceCat7 Год назад

Wonderful video! Can you speak on the proper care & cleaning of a cutting board, please and thank you?

@mariushegli Год назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@ryanhawkins Год назад

Thank you!

@krisbredwell2644 Год назад

***obligatory, you used oak for a cuttingboard comment*** :-) You edge jointed teh stave on the table saw with no jig? Parkt of the reason I don't use more staves is that using my jointer jig on the table saw makes using them cumbersome. If you showed a deteiled explination on this it could be a game changer for many folks. Great video! Great pace!

@johngrey7089 Год назад

If you put the crown up on the jointer it will totally flatten one side

@patricklacasse2877 3 месяца назад

With the 3-D cutting board what angle do you run the pieces through the bandsaw?

@2373stevieb Год назад

Screw the planer. You need a drum sander my friend.

@vbaspcppguy Год назад

OK, just going to comment again rather than editing my last comment again. On the bandsaw you can create a zero clearance insert to avoid some of that blowout. Or a lazy way is to put some masking take across the slot next to the blade, doesn't last but it helps.

@ryanhawkins Год назад

I’ve tried the masking tape method at the table saw in the past, does work well for a short time. I definitely need to look at something more permanent for my bandsaw.

@ericofadel Год назад

Hello, Ryan, may I ask you if spending extra on quality featherboards like the one you have in your tablesaw @8:26 is worth it. I have found some cheap ones for 200 BRL, but idk if it's worth spending extra in that.

@ryanhawkins Год назад

I’ll say yes, although I don’t believe mine are the best ones on the market. I think I got a pair of them for around $35 CAD

@mustang1191 Год назад

Hi, are the reclaimed whiskey barrel boards available for purchase/order again?

@ryanhawkins Год назад

Right now, no, as I have to let some staves dry out a little longer before working with them. I will be making some almost identical boards using reclaimed hardwood flooring, pre-ordering through my website if that’s of interest to you 🙂

@nedimbuyukafsar6434 Год назад

👍👍👍

@jorgeluislameiralameira4015 Год назад

Onde compro. Essas peças

@josephromero1596 Год назад

Did u link that fancy multi mode sander? If not could u please?

@ryanhawkins Год назад

Sure thing, link has been added. Just below the link for the sandpaper

@user-cd6qz4rd1t Год назад

👍👍👍👍

@L4_M4CH1NA День назад

Do all the cutting boards include your “fiddle factor”?…I don’t want one that has been fiddled on

@roopakvaidya1450 Год назад

There's a dog in the background! :)

@unckle247 10 месяцев назад

What bit you use for the handle?

@ryanhawkins 10 месяцев назад

1.75" Freud double flute straight bit

@unckle247 10 месяцев назад

@@ryanhawkins thanks a lot 🙏🏻

@jackfntwist Год назад

I don't like walnut at all. Do you make any that are all oak?

@martind.4930 Год назад

Is CA glue food safe? I thought it wasn't so I have never used it on cutting surfaces.

@ryanhawkins Год назад

Great question and one I wish I had a simple answer for. It seems like the internet leans towards it isn’t but some brands like Krazy and Rhino glue are considered food safe by the FDA, while others like Titebond and Starbond are not. Some say it’s only toxic while fresh and once dry it becomes inert like an epoxy. Others say it maintains its toxicity even when dry and softens when it comes into contact with water. I’ve used CA glue in my boards at home and I haven’t experienced it softening when wet. I’m of the opinion that it is non toxic once cured.

@martind.4930 Год назад

@@ryanhawkins Epoxy contains epichlorohydrin which is carcinogenic. Under the knife cuts, micro-particles of epoxy will mix food and you really don't what that. I guess it is the same for CA glue, don't want to eat micro-particles of CA glue.

@eddaeges9309 Год назад

Is this White oak ?

@ryanhawkins Год назад

Yes it is

@vbaspcppguy Год назад

Sounds like you need to add a drum sander to that wishlist. I have to borrow a friend's when I cut strips like that. Edit: Oh my, and some tables. You gotta stop putting that heavy stuff on the floor. For my backs sake, it hurts watching that.

@ryanhawkins Год назад

Drum sander is on there for sure!

@debbiefinlayson2294 Год назад

A small thing. You have all those barrels sitting there. Why not pop 1 at the end of the cutting table. All your cuts will fall into it and you wont have to collect them at the end from the floor. Same for your rubbish. I watched as you threw it onto the floor. Barrel or bin. Safety for you too.

@jeakim4152 Год назад

Too much glue is bad for human …. because lot of comical

@jeakim4152 Год назад

U talk too fast !

@ryanhawkins Год назад

That’s good feedback, thank you.

@darbywilliamson6957 Год назад

I disagree I think is quite good, I find it boring when people talk slow

@silasdonham8320 Год назад

I find most people talk too slow in videos and I speed them up to fit more in. (That’s why I prefer videos without music!) Great work, great video. Good luck in your endeavours.