Geometric Cube Pattern Cutting Board || Woodworking

Подписаться 284 тыс.

Просмотров 61 тыс.

50% 1

This is my take on a geometric cube pattern that I first saw put together by MTMwood. This board is made out of 3 hardwoods: maple, cherry & walnut. The finished dimensions are 13"x22" and 1.5" thick. If you'd like to see some other things I"ve made, check the links further down.
Thanks for watching!
Ryan
▶️ Want to support this channel?
SHOP BOARDS: www.westcoastboards.ca/shop-1
PAYPAL: bit.ly/3NOhbBO
CRYPTO: bit.ly/3u6Zx4s
▶️ Follow me
Instagram: / westcoastboards
TikTok: / westcoastboards
▶️ More of my videos
3D Patterned Coffee Table
y2u.be/npjxCYLcuFs
From Barrel to Butcher Block
y2u.be/uiu0Hkd6mb0
3D Patterned Cutting Board
y2u.be/Jrh_g79Rzh0
And some links to products used in this video:
Bumblechutes Wood Conditioner: amzn.to/3uHPkMD
Freud Glue Line Rip Blade: amzn.to/3iW1gE5
Diablo 80 Tooth Fine Finish Blade: amzn.to/3AOU1Up
GRR-RIPPER 3D Push Block: amzn.to/3xVopuF
Gravity Heel Kit For GRR-RIPPER: amzn.to/3D08oHI
3M BlueTooth Hearing Protection: amzn.to/2VVVB8v
Silicone Glue Brush Rockler: amzn.to/3yZumrH
Framing Square: amzn.to/3iXIFrn
Metric Tape Measure Stanley: amzn.to/2XvzKox
Router Flattening Bit Freud: amzn.to/3CZu9qM
Pipe Clamp ¾” Bessey: amzn.to/3iV9KLL
F-Style clamps Bessey: amzn.to/3k2KhPL
Titebond III Glue: amzn.to/37OE44p
Camera Tripod: amzn.to/2XCxT1q
Sony A6400 4K Camera: amzn.to/3hRPR78
Iphone Tripod Mounting Bracket: amzn.to/3m8pptb
Belt Sander Makita 4”x24” : amzn.to/3g95WEY
Planer 13” Dewalt: amzn.to/3xVNe9N
Planer Knives: amzn.to/3g7fD6L
Men's Silicone Wedding Band: amzn.to/3Czu5gn
Custom Branding Iron: brandingirons.com/
As an Amazon affiliated member, I earn a small commission from qualifying purchases.
0:00 Intro
0:34 Milling Lumber - Miter Saw/planer/jointer/bandsaw
2:50 First Glue Up
4:00 Second Milling - Joint/plane/miter saw
5:28 Table Saw - Ripping Bevelled Strips
9:10 Second Glue Up
11:00 Third Glue Up
12:05 Table Saw - End Grain Strips
12:41 Final Pattern Assembly
13:40 Final Glue Up
16:11 Flatten & Trim Sides
17:33 Router Fingerholds & Edge Profile
18:04 Sanding
19:23 Oil
20:17 Beeswax & Rubber Feet
21:04 Finished Board

Развлечения

Опубликовано:

9 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@donaldpyles2891 2 года назад

Insane! Your ability to see the outcome is pure talent. Thanks for taking the time to share with us.

@florenceesibi4390 Год назад

Pure talent as a result of consistently building your skills and demonstrating passion for the work. Your love for the craft is quite evident. What an inspiration 😊

@jzero4813 2 года назад

Not just outstanding craftsmanship, but stellar production and editing. I'm sensing Guy Ritchie influences with a twist of Japanese game show and 8-bit homebrew. Well done, sir. Take a bow.

@ryanhawkins 2 года назад

Love this comment!

@kennethwilliams3396 Год назад

Outstanding. Incredible 3d effect from all angles. Excellent craftwork.

@bulentakyildiz3424 2 года назад

Absolutely amazing. 💪💪💪

@NinaThoren 2 года назад

This is so beautiful! Keep up the great work

@florenceesibi4390 Год назад

You’re such a great woodwork artisan bravo 🎉 👏

@user-xo9xc5dy6h 10 месяцев назад

Nice nice nice bro great jobs tnx

@codyseale 2 года назад

You blow my mind everytime I watch one of your videos. I see the finished product in the thumbnail but the whole time throughout the video I don't understand how you'll get there until the final step, then I can't even recognize the original individual pieces to see that "ah ha" moment. God has given you an amazing talent, keep up the awesome work

@ryanhawkins 2 года назад

So kind of you to say, thank you!

@barneyrubble6934 2 года назад

You do such a great job on the cutting boards! 👍🏻🙂

@bartavila7023 2 года назад

Beautiful work

@carloszarate2293 2 года назад

Beautiful board

@RobSchweitzer 2 года назад

Love the sound editing, especially at 12:07 hahaha

@ryanwright5160 Год назад

That was pretty sick !!

@acdclocurasincura 2 года назад

pure art

@SkyBoss52 2 года назад

Amazing, as usual. Thanks for sharing.

@ryanhawkins 2 года назад

Thank you

@av8tore71 2 года назад

Astounding!!

@mariushegli 2 года назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@ryanhawkins 2 года назад

Thank you my friend :)

@tomking151 2 года назад

I really appreciate your editing at all the appropriate moments which show close ups of the manufacturing steps. If only I could understand how you get to all those cuts in an impossibly complex pattern. Fantastic work! Not sure if your dog knows what is going on but you sure seem to.

@ryanhawkins 2 года назад

Thanks for the positive feedback!

@TheEdsousa 2 года назад

Great job Thanks for share

@normolson1 2 года назад

You Sir are amazing, thank you

@ryanhawkins 2 года назад

Thank you!

@user-dk3vc9qr5e 2 года назад

That's a very nice

@bearshockey222 Год назад

Your glue up stressed me out so bad 🤣🤣🤣 awesome video awesome piece

@ryanhawkins Год назад

Thanks!

@gregsnow8656 Год назад

Awesome product. Maybe add some narrative. Otherwise enjoyed watching. 👍🏼

@travishardy1455 2 года назад

I've done this pattern myself. If it wasn't for all the waste I'd probably make a bunch more. Nice work.

@billm4560 2 года назад

Me to Travis! I made 6 like this and your right on the waste!

@muhammadgulzar1542 2 года назад

|:-

@ryanwright5160 Год назад

HEY My name is Ryan too !!!

@cecilebesselink648 9 месяцев назад

Heel erg knap gedaan.👍

@doylelee4228 2 года назад

INSANE!!!! Description of cuts would be great!

@user-nd4ph1ir5u 2 года назад

Оплодисменты стоя Отличная работа.

@Kathyskollectables 7 месяцев назад

Wow!! Absolutely awesome!!! I am on a quest to emulate you!!

@martingagnon5414 2 года назад

If you ever enter into a belt sanding competition I’m putting my money on you. Nice board!

@padders7298 2 года назад

Hi Ryan! Once again an absolutely F***king awesome and a beautiful piece of work! I totally love the editing in this video, especially the sounds that just made me giggle, whilst watching a master at work. Very different to your previous editing but so cool! Don't give up on your previous style of editing because that is also cool! Keep up the good work & thanks for uploading!

@johnfoster6194 2 года назад

Beautiful board, I definitely do not have the patience to attempt doing this.

@brendangallagher732 2 года назад

Hi Ryan. I really enjoy your videos. I’ve made quite a few of the MTM boards, but I think the 3D cube one is the most wasteful. With that in mind I really think you could save yourself a few quid on glue if you only applied it to one surface. You really don’t need to do both- I’ve never had a board de-laminate, ever. Too much glue only increases the curing time, doesn’t increase strength, and most of it is squeezed out all over the place anyway. Oh, and your video editing is brilliant.

@MrTooTechnical 2 года назад

Fucking awesome work.

@jaquespv 2 года назад

Trabalho impressionante que exige muita paciência e concentração, o cuidado e a habilidade com que fabricou a prancha de corte fez com que fizesse uma obra de arte de valor inestimável. Parabéns pelo vídeo, continue fazendo maravilhas desse tipo e muito mais.

@dalelawhorn8725 2 года назад

Gorgeous as always Ryan... Quick question. Can you tell me where you got your oil applicator?? Thank, and keep em coming...

@ryanhawkins 2 года назад

Thanks Dale. Applicator is from Clark's, try this link: www.amazon.ca/dp/B078SJPK7X?ref=exp_westcoastboards_dp_vv_d

@JL-wi9bd 2 года назад

Beautiful piece. You definitely have a talent. My wife and I enjoy the sounds of the work being done, however we also enjoy some narration in videos as well, and found the clamping sounds pretty shrill 😬. I'm definitely not in any position to tell you how to make a video, but just my preference would be some nice balance of wood working sounds and narration; not just one or the other. We love watching Blacktail Studios, however he never has the woodworking sounds and is only narration. Hearing you talk about your work could bring light to your personality and be a benefit. Just a thought. Again, I am in no position to tell you what to do. Best wishes and keep up the awesome work!

@ryanhawkins 2 года назад

Such good feedback! Thank you for that. It definitely helps me figure out how to better edit my videos. I'm a big fan of Cam's channel as well. All the best to you and your wife :)

@user-do4dk9wj7h 7 месяцев назад

This is so great! Is there a particular wood glue you use, and/or is there something you do to increase your work time? I generally use titebond 3, and there's no way I'd be able to use it for the time it takes to glue this up. Absolutely brilliant Q-Bert board (as I think of them as a product from the 80's!) Thanks for the edit!

@ryanhawkins 7 месяцев назад

Glad you liked it! One of my oldest videos, was still learning how to edit 😂 - I use Titebond 3 for all my boards

@BobAbbott 2 года назад

Hey Ryan, love your shop and your work. I make similar boards and I can't help but ask, did you raise the grain more than once? And if so, why?

@ryanhawkins 2 года назад

I might go a little overkill with raising the grain. I do it in between every grit after 80 grit. I'm of the belief it does make a difference in the smoothness of the finished product. But I can't say I've ran any real testing to prove it makes a difference. One thing I do believe it helps with is keeping the glue lines from popping up afterwards and being able to feel them when you run your hand across the board. I find if you continually raise the grain and knock it down, that problem doesn't happen. If I was doing edge grain projects, I'd just raise the grain once, but end grain is a different beast and I do everything I can to tame it.

@olegvatutin507 Год назад

👍👍👍👍👍👍👍👍👍👍

@thichlamuthu2154 2 года назад

Thích làm đủ thứ... Chào các bạn thân yêu

@perrycullen1765 2 года назад

Good to see you back mate, I'm going to ask the question ⁉️ Do you ship to Australia 🦘

@ryanhawkins 2 года назад

I have shipped to Australia, I'm happy to give you a quote.

@perrycullen1765 2 года назад

Absolutely give me a quote for three boards 👍🏾

@Otto-W 8 месяцев назад

Wonder what the board foot waist percentage is.

@nedimbuyukafsar6434 2 года назад

👍👍👍

@dillonjames3849 Год назад

How long did this take you to make?

@robertoramundo4344 2 года назад

Beautiful work! ... 15'46": really glue was dried just 1h later? 😳 Thanks

@daveklein2826 2 года назад

Thats about right

@bigredruss73 2 года назад

This was just a glue clean up, then it goes back into clamps again.

@daveklein2826 2 года назад

@@bigredruss73 I do the same thing. Saves ALOT of time later

@ryanhawkins 2 года назад

I take the clamps off just long enough to scrape the excess, then put them back on.

@miless2111sutube 2 года назад

fascinating video and lovely board. I hated the sound though and had to watch on mute. I much prefer the commentary style.

@ryanhawkins 2 года назад

Great feedback! Seriously. It helps me figure out how to make better videos.

@fifareno5261 Год назад

ต่อทำเปนโต๊ะหรือเก้าฮี้มั้งสิ

@johnpartridge7623 2 года назад

I wonder how much that would cost if you put it into A Museum of modern Art, I bet some rich tosser could pay you enough to retire??? You have a real talent 👍

@ryanhawkins 2 года назад

Thanks for watching!

@mbord169 2 года назад

nice board..a lot of work....some of your rows are off though.

@ryanhawkins 2 года назад

There's for sure a few imperfections in this one. :)

@mr.e7554 Год назад

I stopped the video at 1;57 . ALWAYS !!! put the crown side UP when you joint the board

@fifareno5261 Год назад

ทำแต่เขียง เอามาต่อทำโต๊ะเก้าอี้มั่ง

@wasili-vx2zi9qt7r 2 года назад

👍🤘👍🤘👍

@jamespalmer8206 2 года назад

Completely useless video, also shown in sped up manner with no audio or explanation as to the processes.

@ryanhawkins 2 года назад

Dude, I totally agree. I’m not happy with the editing I did on this one. Been seriously considering doing a better version where I actually explain what I’m doing. Thanks for the feedback!

@AustCan 7 месяцев назад

@@ryanhawkins Hey mate, if you do another can you do something that no other site does... specify the initial board that you use with full dimensions. This way inexperienced people such as myself know to use say by 10 inch wide 4/4 or 8/4 boards and at what initial length to cut them. This would be so helpful!