Red dot sight instillation! NO MORE MILLED SLIDES!!! 

thank you for your valuable time and knowledge you offer to us newbies thanks for time

Strike Industries, Scorpion Universal Reflex Mount for GLOCK Version 2 (G-SURF) is what I installed. I put a Gowutar A17 2 MOA Green dot. Very solid mount and includes an ambidextrous charging handle. Placed a suppressor height night site to co-witness with the rear sites built in thto the Green dot site.

Loved the video very detailed. It’s my 1st time for a red dot on a pistol.

I installed one on my G19 but hated the non uniform look. I wanted my red dot more forward with room for rear sites. It's a cool little convenient mount.

Just installed it on my Glock 27 with the Holosun ...easy install no issues thus far..

I'm glad I came across your video. Since I know the future I know you walked away from this setup because of issues that you were having. Until the other day when I was on Amazon I had no idea this was even an option to get. I was just going to buy a new slide not having my original One touch. I know you might not get this since it was 2 years ago since this video. I will say I enjoyed it and I hit the subscribe button looking forward to watching more from you.

I've got the glock 20 in burnt bronze battle worn finish its beautiful and I don't want it milled I'm going to check it out thank you just got a new sub

Thanks for sharing this video I just added the DPP Titanium glock plate and Holosun 407K green dot to my CCW I'm in love can't wait to take it to the range. Also used a Bore sighter from Amazon to zero my green dot. I saved so much money not having to send my slide off.

Unbeatable value for the price and performance!

Great video man really appreciate your instillation and succinctness.

very nice and simple video, thank you so much.

Just saved me a few hundred bucks... cheers!

Gonna order one in the morning for my Glock 48 ….. thank you

I’d only use one of these that have the rear back up sight built into it. But I’m just building a new upper that comes milled if I want to add an optic. Good excuse to build another gun lol.

I love it! Thx for vid

Nice Video! Thanks...

Nice job looks awesome ! Would that plate work on a cyelee ct2 2moa red dot , also what loctite u used?

Very cool I love to have options does this work on SW shield +. I got my gun without the cuts and SW does sell the slides by themselves

Jeff, when I installed my "DPP Titanium" plate (aluminum version) on my new G3c, I saw the advice about filing down the bottom of the dovetail. Then I pushed the dovetail into the slide a little bit, then looked at a light on the other side of the slide, to see the 'fit' of the dovetail. The bottom of the plate dovetail was over 1 mm away from the floor of slide cut. No need for the file job. So I didn't file the bottom at all (Is the G3c really Glock sight compatible?), but took some of the black coating off the sharp edges of dovetail. When it would go in about 1/3 into the slot, I used a plastic hammer to finish centering it up. It looks great. Did a crude zero with a Laser practice bullet. Will fine tune the POA=POI at the range next week. Since the G3c has the slide sight cut closer to the rear-end of the slide, the Glock DDP over-hangs in the back. Not a lot, just enough to see it's the wrong plate.. :) The one I needed was out-of-stock. I might get a Glock someday when they become legal in Massachusetts. Maybe in a few more years..

is there on of these for p07? it has a similar dove tail cut in the rear.

Will this be compatible with a Glock 17 gen 4 Co2 BB non airsoft pistol?

Any suggestions for a setup for glock 19 gen 3 with red dot sight ? If I have to buy another slide that’s fine

Any idea which one will fit a a regular Hellcat?

What range do you zero, Jeff? 25 yards? 10 yards? Just curious.

I wanted rmr cut but nothing optic ready in Commiefornia so I got a Glock 19 gen 3 and I thought about getting a dovetail mount but instead I got a PSA dagger rmr slide. I think I'll eventually get the OEM slide milled but the dagger slide is good so far. I just didn't like not having backup iron sights with this mount

Any advice for a sig p320.. I need a plate with the DPP platform

This probably will work on a 43x with a little more over hang on the slide ....right?

They have sight install or remove tool for Glock slides. Would it work for the base install? Hammering just don't seem right. Just saying.

AMAZING

Will it fit in my Glock 22 gen3 .40?

Is there a link to order mounting plate and sight?

will this fit on my stoeger str9?

do you still like the DPP mount?

does this type of mount hold zero? lets say 500 rounds later?..

It depends on what possible use the glock or other gun is intended for if this is a adequate method for installation. For casual rolling of tin cans etc., what the creator has shown is good. If it is for self defense from 2 or 4-legged predators co-witness is essential. Gabe Suarez is the one that pioneered this technique for american civilians and police. He is very clear about the importance of backup sights. one for if the optic fails and two it allows one to find the dot quickly. A minor third point is that one wants the optic as low as possible. I just picked up a used oem glock slide milled out for an EPS holosun red dot and optic is mounted low; so low that the factor oem plastic sights allow co-witness. Makes a better profile for CCW. There a downside to optics and that is at night at close distances. Then other means have to be used for alignment of the pistol with the target.

Why is the video flipped horizontally? This isn't a reupload right?

Accidentally ended up with one of these plates. Long story lol. Haven’t installed it on anything yet. I have a Glock 19 with the MOS slide and so far that is the only pistol optic I have. However I do like it so I may give the plate a try on one of my other Glocks as none of the others have a milled slide.

Very informative, thank you so much. One question if I may, how did you make sure it is squared with the gun/slide ?

do you have a red dot for c9 pistol defense system 9mm?

How come none of the screws fit the mount

I wanna do this with my Canik tp9 sa Will it fit

What's the link?

Hello Jeff , I have a Glock gen 4 model 23 40 cal , my question is how sturdy is this DPP after you shooting several rounds of ammo at the range has anyone had a problem with it coming lose? I’m debating on getting the DPP or having it milled witch I’m not to fond of cutting into the slide thank you.

Great video! Do you think it can with stand the power of 45acp and 10mm? Would like to get one but afraid that mount will come out in time since the added weight that the beavertail need to support

Good work Jeff why only Clock how about sig.sauer or Springfield 357sig Thanks like your work.

Jeff, you used Lock Tight "Red", the Blue would be the right choice, Red is forever.

I was naive too to believe that this would work okay, even though red dot is sitting very high. I had the same plate, I put it on my Glock 19 and just like you I had a Vortex Venom but this configuration just can’t hold zero. Don’t waste your time and money.

Can anyone offer any insight on long term durability of dpp plate?...does it move at all after x amount of rounds, etc.?

I'm all about saving money where I can but i can't lose my rear sight for a push in plate in my EDC. Electronics do fail and they WILL fail when you need them most, that's why I need to keep my rear sight. If it was for a range toy I would absolutely use it and may grab one for my ol G22 for the range. Thanks for the vid.

How do I do this for my Glock 19 GEN three will it fit

What about if you change the front sight? Because now it’s lower in base of the rear sight

Titanium ? Dove site says 17-4 SS? Are there different material choices ?

I may be mistaken but isn't RED Loctite HT 400??

for CZP10C please

How has it held up at the range?

How about a sd9 2.0

Can't use backup iron sights incase red dot were to fail? smh

Update on range use?

Will it work on g22 nonmos .40

Dove is sold out of the night sight version. 😪

Can you please give me a link to this or direct me to it please.

Does this method work for gen 5s ?

Do you have the link for it ?

That sits very high. How’s your accuracy with it?

Suggestions? Oil slot on your slide before installing. Take apart slide and install dove tail by itself, then put back together.

I thought if you use red lock tight you need to use heat to help remove them lol

By doing this process you can’t use the regular sites to co-witness with the red dot. That’s why it’s better to have the slide milled

Do you aline the dot with your front sight ?? I’m having trouble getting mine to zero

How much, and where do we purchase

You’re hands look reeeeeeal soft

You misspelled installation.

Will this damage slide?

It’s spelled “installation”.

Great idea..but it looks horrible. Just pay to have it milled out to you RDS.

I put one on a Taurus g3c. After about 200 rounds. The dove tail on the mount sheered off and the red dot flew off and smacked me in the head. I wouldn't trust these on a defensive pew pew

Go get your slide milled or buy an optics ready version… 🤦🏻‍♂️

Good afternoon, how are you. my name is Michel, I am a sports shooter and I would like to know if you can send me these dot sights. shipping is to Brazil, I await your return. thank you so much.

I will always buy optic ready or include the milling cost in the price of the gun in my head when I buy it. CH Precision has always done me right, if you want a co-witness with your stock sights stay away from these Dovetail mounts. They sit too high.

Milled is best, period! This looks silly, puts the dot up too high and you have no back up sights.

That thing is a monstrosity!

Anything like this for the HK45 Tactical V1 Full Size .45 ACP?