I WANT A RED DOT, but don't have a MOS slide ... Easy Red dot instillation!!! 

The DPP was good at the time, but there are issues with it. This company found the solution to those problems! Check out my other video ..... trust me, it'll be worth your while! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BIx2QSiD5yQ.html

Everybody who bothers to do such an informative vid gets a thumbs up.

Thanks, Jeff! I have a Glock, mod 30 that I've wanted to add a red dot to but didn't want to go through the hassle and expense of sending the slide in for the modification. Appreciate the video and info! JD (Michigan)

This is exactly what I needed. I have a Gen 3 Glock 35 and I want to add an optic. I didn’t want something that would move while shooting. This is a great video. Thanks Jeff.

Clearly explained and you make it look easy. Kudos!

Wow.... Here i was trying to piece together stuff or buy a pre assembled slide with a red dot.... Thank you for the great tip and video. Helped me save quite a bit for my 19G5.

I’m really impressed that you have 10yrs of use on a G43.

glad you made this video.. I almost bought the Glock Store Dove Tail Mount & get one for my G19x. I really don't wanna have it milled. I do see PA has the reg. $300+ 407CO on sale for $179.. Might be a good pair up

EGW makes mounts for the popular optics and glocks, what I like about them is the progressive taper on the dovetail...you need a press tool to install..but it is the most solid fit I have tried yet...it basically becomes part of the slide.

Excellent video. Good photography, clear and concise verb instructions. Informative, easy to watch.

Dude,. Thanks I didn't know they made this,. Just ordered from Amazon. !

Nice job 👏 👍 👌. Thanks for sharing 👍

Awesome video. It was well explained! 😊

As my eyes continue to fail, I’m no longer able to focus onto the front sight. Very frustrating indeed, the red dot seems to be the best solution. I will be doing this myself, thanks for the vid.

Awesome! Thank you so much. Was originally going to get the slide milled but if I don't need to, then I can put more into the sight

You know it’s a dovetail because that’s what it is 😂 Great video

I've done this, and just wasn't satisfied; the plate and red-dot device were easy to install, but the red-dot's use was problematic for me because having the dot so much higher than where the iron sights used to be meant I had to adjust my firing grip since my natural sight alignment wasn't there. Under stress conditions I found I had to chase the dot to get on target or tilt the gun to get the front sight in the screen before dropping it enough for the dot to become visible. I fixed this by putting my own markings on the red-dot's frame and that worked well to help get the dot on target fast. In essence, I manufactured something of a co-witness to adjust for the dot's height above the slide. My next step might have been to install a tall front sight, but I decided I'd rather mill the slide. I like red-dot sights and they're great once on target, and using a plate is a quick and easy install, but you have to practice getting the dot on target without benefit of anything like a co-witness. Good vid, BTW, to show peeps this isn't a hard thing to do.

That's beautiful. Thank you for this one.

Outstanding review. I'm buying one now

Good job Jeff

I love it’s mounted on rear end of the slide and just as you said is excellent for concealed carry, I have just ordered it for my G 26 👍🏻😉

Ive never had luck with plates. Getting the slide milled or getting a different slide is so much more reliable. I guess it all depends on your mission.

Thumbs up for the informative video. For anyone that wants to try a red dot I would not recommend this route or even having their current slide milled. As someone that used to mill slides I recognize the market has dramatically changes in the past 10 years and it's exploded with options. At the time of this vid there around 100 auctions for new stripped slides cut for various optics. Buy a new slide. If you don't like it, sell it used. They sell immediately even used and beat up. There is one with a broken tap stuck in it with bids right now. Just swap slides. The DPP also has some issues with tilt. The dovetail cut causes the plate to be angled slightly forward. This can max out the vertical adjustment on some optics.

I've tried a few red dot equipped pistols and like it very much. Thanks for this video.

Just what I need for my Glock great video thanks. 👍💯

Great video sir! Thank you.

Be careful. The companies name is DPP Titanium but some of the plates are aluminum. It can be confusing when reading the product description. As an example: 'DPP Titanium mounting plate for Glock 19'. But further in the description it says it's made of Aluminum.

Great video Jeff!

I would recommend a sight pusher. They are very useful and you'll get good mileage out of it.

Love this video…. More money to spend on my red dot!

Late to the show , but i appreciate the video , love my 43x non mos & This video just makes it better . Thank you amigo ✌🏾

Thanks for this , I was looking to do this for my Glocks .

Exactly what I was looking for 👊

Thanks for sharing!!

Keep the videos coming friend

Thanks for the information. I w as about to send In my slide to br milled today. I'll try this instead.

Awesome video!

Only vid I found on the gen 3 so far so thanks was searching for a way to attach a sight.

Im so glad i found this video.

Great video and very informative, I wonder if it can work on my canik tp9 sf it's the same as your glocks. Take care and keep up the great work.

Great video, thanks!🇺🇸

Excellent, good to know it can be fit without the extra gunsmith work

Great idea, however I would prefer to have the slide cut so the optic sits as low as possible.

Nice, this way you can try out different sights without jacking up your slide.

I saw a guy who done something similar like this with a smith an wesson performance center 9mm ez, which is what I have,he had to take the slide off,the screw is under the slide holding the iron sights on,once off,the he simply added the plate an screw,then mounted red dot an boom,man I'm so glad,cause this is my first pistol an thought I'd surely have to have my slide milled,so now I'm excited to get my holosun reflex,to go with my olight baldr s laser light combo.

I'm sold!! Great video!!

I bought a Glock 21 used with this plate and a Vortex Venom, went from the pawn shop to the gunsmith and had a factory glock rear sight put back on

Thanks for showing how to do it .. I’m planning to put in my Glock 19 5 gen

Excellent. Thank you very much

Nice! Easy tutorial.

who knew ? this a great information and it can save a person such as my self alot of money

I used to work with a dude that looks exactly like you. You wouldn’t believe how close. Woa.

Heads up! Dovedot adaptive plate is the new king of dovetail mounts. It is more expensive but has a rear sight built into the plate and the corresponding fiber optic front post. Currently they only have Rmsc footprint, but RMR is coming in early 2023.

Excellent!

I have a Glock I wanted to install a red dot sight. Upon investigating, sending the slide out for milling is $200 just for the milling service. And it has to be milled exactly for the sight brand you want to use. I like what I saw here. I’d rather spent a few bucks on the slide mount plate and apply $150 savings to a better red dot sight. Thanks for the video !

Any issues with zeroing in your holosun 507k? I did this exact process and used a bore site to laser it in but the 507k bottoms out just a half inch to a full inch below the bore site. I’m assuming this was a defunct sight but wanted your opinion on zeroing in if you had any issues

Just watched your video assembly/lube the hellcat just what I needed after buying one today thanks . Your content is awesome !

Thank You you Saved Me alot of Cash.

Great vid

Cool video dude

Thank you I was curious about witch actual site to buy. I’m gonna go with the holosun

Great video..thanks.

I didn't know DPP make a mount for non mos slides. Cool.

Amazing video!!! Thankyou

I like your content brouh, good job!

Great video 👍

I did the same on a HK VP9. It is even better because the 'socket' is larger.

Very nice 👍

this is the same way i mounted my holosun 407k red dot with the dpp mounting plate.. first i wasted money trying out the different style/brands of rear sight pusher but i found that none of them work to my liking, plus it wont be able to push the dpp mounting plate on because it's not big enough to fit the dpp plate.. i decided to use a rubber mallet and it worked better than any of the sight pushers i bought plus it didnt leave any marks or damage either. i didnt sand the bottom though, i felt by doing this, it might not sit flush and even. without sanding the bottom, it still went in like butter using the rubber mallet.

Thanks cuz I was how to.. great video

Great information and I plan on doing this to some of my glocks wanted to know what type of holosun you used in this video

Great video bro, THX

Omg thank you for this video. I don't want to but a 43x 😂

Strike Industries scorpion universal g-surf glock reflex mount is another great option for a non milling / machining of the slide. it access many different footprints of various Red Dot sites. It even has a mount that replaces your back plate that the Red Dot adapter bolts to. It also has an optional charging handle also!

Thank you.... My setup (same as yours) comes in a couple days and will be mounted on a Glock 30. Hoping for the best.

Thanks for this video

Awesome!

Thanks for this info I didn’t want to drill holes in my slide

Love it. Thank you.

Thanks needed that in my life

Dueck Defense also makes a similar product for Glocks. Some models even have back up irons.

Interesting, DPP makes good plates.

Nice video thanks buddy

I just send mine out to get milled the day I buy them... lead times usually never too long and i cant deal with the raised plates i dont buy MOS ready models for this same reason. Def a great option for getting a MOS on asap im just a profile who**

Exactly what worked best on my glocks without slide cut.this plate is snug in place and I can’t imagine the red dot moving

Thanks for the video. Went to use the same part on my G19, but the set screws are not threading. Any idea where I may have gone wrong?

Great video! Thank you so much for putting this together and sharing with all of us! Curious if you know of any way a light can be mounted to a Glock Gen 1 or Gen 2? I've heard there are adaptors out there, but I haven't seen one. Thanks again for this great video!

From a past experience, do yourselves a huge favor and buy a pistol with MOS or have it milled. Installing this plate is a complete mistake.

Get a suppressor height front sight for co-witness to the rear sight built in to the Holosun.

iam watching this video 1 year after it was posted! I was curious about other mounting options other then milling the slide. I bought my first glock 19 and it is a MOS wow i thought no need for a dovetail mount now and i can keep my rear sight! Nope red dot sits up to high to co witness with regular size sights because you still have to use a mounting plate. Whats a fella to do now buy suppressor height sites? The Boom i found the scs for glock 19 mos foot print and i can keep my Amiraglo night sights and it needs no battery its fully solar power! Wow in one year the tech has changed so much i cant wate to see what 2023 brings for the gun industry!

this is awesome did it change your accuracy

Good job bro ,so us that are considering this option have some kind of idea just what we're looking at , will help us make a decision if we still wanna go this route or not , thanks

great video getting one for my glock 29 i’ll have a vid soon

Glock is absolutely beautiful handgun,

Do you have a link or model number for this exact DPP kit. For Glock 43 with Holosun Red dot. Thank you.

i have a plate by a different manufacturer on my ruger american. that rear site was not going to come out with a hammer, without damage. it was too tight. i bought a quality site pusher. the advantage is, i can use this pusher on my other pistols, to do more than just install a plate. it has graduated markings, so i can see precisely how far i am moving something. no guess work if i want to install better sites, or re install the old ones. i can also loan it out, or do my buddy's guns for him. the red dot on my american works ok, but i find myself having to hold the pistol at a funny angle to see the dot. once i got used to doing it, target acquisition was quicker, and my grouping improved. i needed the red dot because i'm getting older and my eyes aren't what they used to be. so far, i'm a couple hundred rounds through it, it's not moving.

I may try this. I haven't wanted to have my slide cut .

Damn good video.

Can you still pocket carry with the rmr mounted

Great option for Red Dts on sim guns