No video :(

Redcat Marksman 1st run, must do Mod & waterproof test! Redeemed!

Подписаться 29 тыс.

Просмотров 7 тыс.

50% 1

I finally got out with the Marksman and I gotta say I had a blast with it! It did way better than I thought it would and I found myself really enjoying this new beast. Maybe a bit too much when I decided to get a bit close to the water 😆. Check it out and see what ya think!
Redcat Marksman here!
bit.ly/2Z2aC9L
Wheel hex mentioned found here
amzn.to/39WoJ2F
Stainless steel wheel weights used found here
amzn.to/2Y1FNBD
Brass wheel weights used found here
amzn.to/3B4tDGJ
Amainhobbies affiliate link
bit.ly/3CcTUCN
SOME OF MY FAV SCX24 UPGRADES FOUND BELOW!
Small 2s battery I’m running here
amzn.to/37ouPr8
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/i...
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@markmtbrider 2 года назад

I am just glad to see some 2.2 rigs come out. Hopefully it won't be the last.

@teamsargentrc6399 2 года назад

Change to flat face screw in C hub you'll have a 2 hairs more streering

@2fmrc 2 года назад

Sweet! I’ll have to check that!

@johnbentley2926 2 года назад

Lesson #456 to always stand below your rig on an incline. Looked like a 20 ft tumble to the water and nothing broke. Pretty solid rig. Love your videos!

@2fmrc 2 года назад

I appreciate it. Haha! Yeah I normally always do and I actually had the thought in my head of it rolling down the hill. For a minute I thought ehhhh it’ll make a cool video if it does. Then when I seen it actually happening I changed my mind 😆

@geneschindler9537 2 года назад

Looks a lot better, then the last time and seems like it handles good 👍

@geneschindler9537 2 года назад

Thanks it does when I first seen it, it looked cheap but I was impressed 👌

@danielrenz9934 2 года назад

I felt the same way when I first opened it up then it change me too lol Now I'm really enjoying it Appreciate your tips and tricks

@TheRCAdventurist 2 года назад

Wow!! Very impressive rig and crawling skill 👏also love the roll at the beginning lol 😆

@2fmrc 2 года назад

Thanks! I was very surprised by it honestly. Having a lot of fun with it so far!

@TheRCAdventurist 2 года назад

@@2fmrc I can tell!!!! Looks to be a keeper 😎

@CRAZYBUILD349 Год назад

thank you, your infomation made my mind up, i know what to look for and can fix it from the start, thank you for your hard work,great deiting to!!!

@bobzilla9p0 2 года назад

I know in your earlier video you were a bit down on the Marksman, and I glad you see the potential in the rig now. Redcat was not just "cashing in" on the leftovers of the Wendigo. They were giving the public what they wanted. I would say half of the Wendigo owners out there were converting them into 2.2 crawlers. I have 2 Wendigos an RTR that is stock for high speed romping through desert washes and the Kit which I built for romping and crawling. On the Kit I started with the same motor as the stock Marksman for dedicated crawling, but I am switching to a sensored brushless setup that will allow for slow speed crawling and match the speed of the stock RTR. If the Marksman had been available a year a go I most likely would have bought it instead of the Kit as second option. Finally, all companies have to spread parts usage to multiple models. Homologation for costs, as R&D, investment in molds, and manufacturing takes time and lots of sales to pay back, so companies need to use parts over several models. I love the new straight axle (XR247) as an option instead of the old Axial AR60's (a great axle), and have one for my rear on my CAMO X4 (Yeti in disguise) (the stock HSP sourced axel sucks).

@trailwomanrc 2 года назад

One thing I liked about the scx24 deadbolt was changing the driver's head.

@roadrash76 2 года назад

The servo hole mod I did first day. Also added locktite to the bolt for extra grip.

@DaveGlitchHare 2 года назад

Thanks for explaining the steering issue, its what was holding me back. Go Wildcats!

@gfyracing7632 2 года назад

I'll send you some pictures of my painting and you can see if you want me to paint the head for you.

@rcilluminati26 2 года назад

Nice crawling! You're changing my mind on this thing. I love the idea of an 1/8 scale with 2.2" wheels but the limited turning seemed like a deal breaker. If its possible to get a few more degrees it might make a big difference. What do you think about somehow adding a dig unit to this truck? That would be a massive advantage! I honestly felt the same about my Gen8. Got it on a trade and it seemed like a cheap toy but the damn thing works so well I went ahead and did a few mods, now its one of my favorite crawlers. Looking forward to more vids on this one.

@chrismoreau8727 2 года назад

The reciever box is not waterproofed. I spent hours in the water then it kept cutting out. Then the reciever quit so I put another reciever and packed it with dielectric grease. Will test it out again

@2fmrc 2 года назад

Yeah that’s part of the reason I was surprised it kept running lol. No rubber seals on the receiver box but it kept on kickin! It’s still running fine!

@chrismoreau8727 2 года назад

@@2fmrc I pulled out the reciever blew on it and carried it back down the trial. Then when I got to the street it drove fine all the way back to the car. But I still swapped it out with another redcat reciever I changed out on my everest 10. Didn't want to take a chance of it cutting out again. So she's waterproofed now and will definitely test it in the water again.

@ezboyrc553 2 года назад

I seen the steering is horrible. Glad you found a way to make it better.

@2fmrc 2 года назад

Yeah I have a couple more ideas for it also. Hopefully it’ll get even better!

@brianargo9306 2 года назад

I'll tell u something else that might help it steering. The link that goes from the servo down to the steering link take a like bolt and 3 nuts u can even put washers on there to make it swivel a little better. But anyways separate the 2 links where they connect. What ur trying to do is the link that goes to the servo up and more level.

@bluecollarbarbell4370 2 года назад

I looked at this rig at LHS and did not like it all. Now that I see how it preforms my mind has been changed. May have to add it to my list.

@rykerthestryker777 2 года назад

Thats Impressive! i looked at one at the hobby shop i like the size of it but not really into crawling to much but thanks

@2fmrc 2 года назад

Oh man! I was always a track guy until I got my first crawler and then I just went crazy for crawling lol. Thanks for watching!

@rykerthestryker777 2 года назад

Yeah I have a decked out gen 7 pro it’s for sale just not really into crawling any more I also have two scx24s thanks for taking the time to reply

@bobzilla9p0 2 года назад

Keep the great vids coming (subscribed)! For more improved steering on the the new straight axle (XR247) I shaved 1mm off of the front C-hub screw mounts and counter sunk flat screws to remove the Button heads from sticking out for another 1mm of knuckle arm clearance. This give about 4 degrees of total increased steering angle. Not a lot, but with your mod of moving the steering arm connection to outer servo horn hole it makes the steering more acceptable. I can't wait for aftermarket aluminum and brass knuckles with more "throw" in the arms. There is an aluminum one available, but it is an exact copy of the stock plastic one. I have also heard that the Club 5 servo mount helps with the steering issues you showed in your short vid, but I have not tried it yet. I hope that helps!

@2fmrc 2 года назад

Awesome! I’m planning to take a look at shaving a bit off of them as soon as I get time. Mostly buttoning things up for a big crawl this wknd at the moment but I may get to it before we leave out. Is the club 5 servo mount the one for the Gen 8 or marksman? I had it on my Gen 8. I just recently swapped the servo on this thing and the holes that the servo screws mount to are very thin and basically stripped as I backed out the screws. The threads came out with the screw lol. When I put the new servo in it held but the screws didn’t really get tight. Be nice if there was an aluminum option.

@bobzilla9p0 2 года назад

@@2fmrc the central chassis of the Gen 8 V2, Wendigo, and Marksman are all identical. The bumper mounts, servo mount, differential, shock towers and center skid are the same. Tge transmission is tge sam, butI heard the transmission on the Wendigo might have slightly different gear ratios, but I have not confirmed it. This means all the aluminum Redcat and club 5 version of those parts are compatible.

@2fmrc 2 года назад

@@bobzilla9p0 awesome. I thought so. I’ve been playing with some metal bumpers I had left from my Gen 8 build on it. Didn’t really like them but they did line up perfectly. I could tell the chassis and stuff looked the same. Just haven’t tried to fit much aftermarket stuff on it yet. I actually have a set of the club 5 steering links new in the package for the Gen 8. May end up using them somewhere also lol. Thanks for the info! And the sub!

@gabrielbeach5426 2 года назад

I'm leaning heavily on your opinion with this one as with everything else. Had my eyes on it for some time.

@2fmrc 2 года назад

Well hopefully I don’t let ya down. I wasn’t that excited about it at first look but it ran really well

@tygger420 2 года назад

Im like you in live in maine in middle of know where,So i also have to buy pretty much everything off line.and i know people complain but im really liking Injora products.Also i just put my SCX 10 III fully submerged in the river,floating upside down after it went in,i waded in after it ,Threw it on shore and it ran all day long so releaved.thanks for great video

@2fmrc 2 года назад

Nice! Glad it survived!! So far this thing has been doing really well. I’m honestly surprised at how well it’s doing.

@billknepp1965 2 года назад

could you tell me where the links are positioned from stock?? im assuming the front are as far forward as possible to give the best approach angle.. but the back im really wondering about.. I have the Wendigo.. I like it its nearly the same truck.. but the rear links are different.. the pinion is 17 tooth where the marksman is 9t.. n the Wendigo is a brushless.. but not for long 😂.. im going to order upper n lower rear marksman links the tires n foams n pinion n the aluminum shock tower's I broke.. took a tumble. brushless drag brake is nonexistent n i looked away for an instant 😂 but yeah thats the thing I can't figure out is how the links might be positioned

@Ryan-qb5ye Год назад

Can you comment the tires you’re using

@2fmrc Год назад

Sure! These are what I had on in this video. bit.ly/3UkYqcL

@Mrrootsfull 2 года назад

How is it even possible to make a rc crawler that is much worse than the gen8 v1? They attempted to make it better with the gen8 v2 but that was too late. And now this......why? Why didn't they learn anything from those mistakes?

@MrAnderson2744 2 года назад

how is it worse please explain because this thing has mostly positive reviews

@swashbuckler5539 2 года назад

Did you ever paint the fenders if so could briefly describe how?

@2fmrc 2 года назад

Nah I never did end up doing them. Figured they would scratch too easily. The bed looked awesome after I did it but even it will scratch off somewhat easily.

@swashbuckler5539 2 года назад

@@2fmrc hows it holding up ? I’m ordering one soon

@2fmrc 2 года назад

@@swashbuckler5539 it’s been pretty solid for us. We haven’t had it out much lately. It’s been pretty nasty and wet. So far we haven’t had any breaks on it.

@swashbuckler5539 2 года назад

@@2fmrc nice I’m looking forward to getting mine I’ve found some pretty good spots around town for it lol

@dawsonbrooks5071 7 месяцев назад

would u recomend the axles on the marksman? looking for a wide axle to put on a 1/10

@2fmrc 7 месяцев назад

I would probably go Capra axles. If you don’t mind portals. They have a good turning radius and are pretty wide. Plus parts are very easy to come by. For the Redcat you’ll have trouble getting overdrive etc imo.

@futuremotoringdetailcaraud7193 2 года назад

can you over drive the front axle ?

@2fmrc 2 года назад

I don’t know of any gearing or anything available for it yet but hopefully someone will make some for it soon!

@anthonybarto4721 2 года назад

Is their anyway I can inbox you or message you personally I have a few questions I’d like to ask.

@2fmrc 2 года назад

Sure! Shoot me an email @ 2fastmattracing@gmail.com

@anthonybarto4721 2 года назад

@@2fmrc thank you I appreciate it

@markmtbrider 2 года назад

See , not a total POS at all. John Holmes said it wheeled.

@2fmrc 2 года назад

Yeah I didn’t really feel like it was a pos but I was a little let down with the quality of the body etc. Still wish the aftermarket would pick up more for it but it’s a solid truck. Just don’t think it’s much over a $350 truck imo. I think that’s why it’s not selling real well. And I figured John Holmes would love it…. It comes with his motor stock lol

@markmtbrider 2 года назад

@@2fmrc yep, not too unbiased ... Heck I get sticker shock looking at axial' s scx10 -3's.... getting a lot of performance and good build quality but wow.