Redundancy based on Single Failure Criteria.|Ramesh Subramanian |RMETC Videos 

will do

I dont think so..Can you tell me (Time in the video where I have said)--safematic minimum compliance is 50% coz both the pumps acting TOGETHER should meet the requirement

can..but not sure if it will generate enough views.

​@@rmetcvideos sir keep posting more and more videos from mmd exam point of view and we do share your video links in whatsapp groups...so definitely you will get views in coming days...your content and way of explaining is superb

rams affect the Torque...Pumps affect the speed...If you loose two rams--redundancy from torque perspective is 50 %

Sir since can we not achive the same effect even if two rams are isolated as the work done under similar sailing conditions is same in both four and two rams. The increased flow rate, twicw in this case, in two ram case might increase the working pressure and hence create more torque.@@rmetcvideos

steering is from 35 to 35 but timing is from 35 to 30

ye rule kahan se mila bhai ?? Kuch Latest nikla hai kya...?? Atleast till Oct 2015 ka edition mein se ...Regulation 16.2.2 ..... at least two identical power actuating systems which, acting simultaneously in normal operation, shall be capable of meeting the requirements of paragraph 3.2. Where necessary to comply with this requirement, interconnection of hydraulic power actuating systems shall be provided. Loss of hydraulic fluid from one system shall be capable of being detected and the defective system automatically isolated so that the other actuating system or systems shall remain fully operational; ------ Focus on the word--acting simultaneously----

@@rmetcvideos 16.2.1 two independent and separate power actuating systems, each capable of meeting the requirements of paragraph 3.2; or 16.2.2 simultaneous waala ...ok sir understood