Reefs RC Beast 2000 in the Losi DBXLE 2.0

Подписаться 73 тыс.

Просмотров 6 тыс.

50% 1

This servo is AWESOME!!! 3S runs it great but 4S is even better!! links below for the servos and the DBXLE Check them out and use the links to help support Exocaged RC, Thank you guys!!
Check them out here at www.reefsrc.com
Beast 1000 www.reefsrc.com/shop/p_265587...
Beast 2000 www.reefsrc.com/shop/p_265588...
HRP also has these in stock
Beast 1000 www.hobbyrecreationproducts.c...
Beast 2000 www.hobbyrecreationproducts.c...
losi DBXLE 2.0 Out of Stock everywhere
Amain bit.ly/3p7a6Ag
Hobbywing Max5 ESC
Amain bit.ly/2VGxsC1
Amazon amzn.to/2VB4eoE
Ebay ebay.us/s9jyJ0
Flysky GT5
Amazon amzn.to/3iz6Jk9
Ebay ebay.us/I6ukB0
Giant Grip Tires
www.davesmotors.com/MadMax-Co...
Vitavon parts for this magnificent beast!!
Front Bulkhead ebay.us/IafgD2 (Silver)
Front Bulkhead ebay.us/PxZrCH (Red)
Center Transmission ebay.us/syFnlP (Silver)
Center Transmission ebay.us/xyD9zb (Black)
Rear Hubs ebay.us/4GMKF3 (Black)
Chassis Supports ebay.us/SGqXIU (Silver)
Beast 1000 Specs
High Torque High Speed Brushless Servo
INCLUDES: REEFS SINGLE HORN / REEFS DOUBLE HORN
SUBMARINE WATERPROOF: 7 Point Seals
Magnetic Angle Sensor
Pulse Width Modulation Control
Voltage 4.8V - 8.4V
Mechanical Angle: No Limit
Internal: Steel Gears / All CNC Aluminum Casing
Bearing Type: 5 Ball Bearings /
Wires: 22AWG
Weight: 10oz / 285g
Dimension: 2.59 x 1.18 x 2.32 (LWH)
Torque: 800oz @ 6v/ 900oz @7.4v/ 1080oz @8.4v
Speed: .11sec @6v/.095sec @7.4v/.08sec @8.4v
Spline: 15T / Dead Band Width: 2uSec
BEC Not Req. Recommended for max performance
Beast 2000 Specs:
High Torque High Speed Brushless Servo
INCLUDES: REEFS SINGLE HORN / REEFS DOUBLE HORN / 3S & 4S CONNECTOR
SUBMARINE WATERPROOF: 7 Point Seals
Magnetic Angle Sensor
Pulse Width Modulation Control
Voltage 7.4V - 16.8V
Mechanical Angle: No Limit
Internal: Steel Gears / All CNC Aluminum Casing
Bearing Type: 5 Ball Bearings /
Weight: 10oz / 285g / Wires: 22AWG
Dimension: 2.59 x 1.18 x 2.32 (LWH)
Torque: 1000oz @ 10v/ 1250oz @11.1v/ 1450oz @12v / 2000 @ 16.8v
Speed: .10sec @10v/.11sec @11.1v/.10sec @12v/ .09sec @ 14.4v / .08sec @ 16v
Spline: 15T / Dead Band Width: 2uSec
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

Развлечения

Опубликовано:

8 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@nickhathaway4617 3 года назад

That thing so heavy and with those bad landings that thing is a beast with nothing breaking

@Tacklefinlures 3 года назад

Can’t deny it... yes super fast on 4s but the price tag is just too much. Great video brother! 💯

@ExocagedRC 3 года назад

Its high but less than the best hitec and this is faster.

@RuisRcAdventures 3 года назад

Awesome run Joe, that Losi is an absolute beast! Great footage as always 🙏

@ExocagedRC 3 года назад

Thanks 👍

@dblackinf 2 года назад

I just ordered this servo last night after watching your video, I’m looking forward to it!

@scheers100 3 года назад

Nice flying 👍

@Addicted_2RC 3 года назад

Well that really is a BEASTLY servo!!! 👊👊👍👍

@RenderElectric 2 года назад

Would've loved to have seen you tap out the servo saver. Great video!

@Blueknight1960 3 года назад

Beastly servo with a beastly price.

@i4nic256 3 года назад

You should probably put some padding under the servo to isolate the vibration and shock from the chassis.

@JustCallMePCra 3 года назад

I want this thing so bad!!!

@ExocagedRC 3 года назад

its beastly

@prestonsrc 3 года назад

I remember reading from Holmes Hobbies that using the balance plug for direct powering your servo can burn them up. Maybe be different with reefs but holmes had a bunch of people do this and ruin there servos.

@ExocagedRC 3 года назад

I have that safety part in there for that reason. But if the servo is rated for it, it’s good to go

@Rusty-Metal 3 года назад

Good lord!

@3SonsRC 3 года назад

That servo is insane. You might consider using some spacers to bring that servo up a bit and maybe tape some yoga mat in between the servo. IMHO the heat disapation benefits are small compared to the risk of metal on metal shock slapping that big rig. To much $$ at risk there IMHO, metal to metal maybe ok in crawlers but not in a huge heavy basher 👍

@ExocagedRC 3 года назад

Good point, it took some hits on this one but it wasn't flat landing on pavement either

@517rctrailcrawling 3 года назад

Reefs is legit! Thanks for the video bro! 🔥🔥🔥💯✅‼️‼️‼️‼️

@ExocagedRC 3 года назад

Yeah man. These things are awesome

@240dan 2 года назад

What's the verdict on powering the 2000 through the car's 4S batteries instead of it's own battery? I watched a video from Reef's, they recommended powering the servo separately. I'm about to buy either the 1000 or the 2000. I'd prefer the 2k if I don't have to add a separate battery. Thanks and keep up the good work!

@jamiefox8670 3 года назад

Do you know if the dbxl-e chassis will support a gas motor? Nice rig you have?

@rezzrollinrc 3 года назад

✊🏽Exo✊🏽

@ardesheerford1741 2 года назад

For this servo does it only work with direct power or is the direct power optional and you could just connect it to your ESC??

@slick408 Год назад

The esc, bec is 8.4v max, they rate them at "peak" but in real life you get like half of that. Castle Xlx2 says 20a peak, might be 10-12a constant. A servo might need 15a for 1800oz but you only have 10a so you get 1200oz might hurt or heat up the esc, might lose connection from the receiver. A li-ion battery is preferred because they are tougher, add like .5 lb. If you want super torque you paid for, it has to have its own battery.

@Mckhus 3 года назад

I have heard servo touching chassis is super no go cos of vibration and impacts that will go straight to it and mess the electrics? I always lift mine a bit cos of this reason

@ExocagedRC 3 года назад

I’ll lift this one too but it took this abuse pretty well.

@tjanderson0709 3 года назад

And he sends the 15 lb losi like US airmail 😂👀🔥

@ExocagedRC 3 года назад

I was trying to go easy

@tjanderson0709 3 года назад

@@ExocagedRC 😂😂😂

@Blueknight1960 3 года назад

15 Lbs? Mine weighs 37 lbs with batts.

@adamkaser4759 3 года назад

I thought that a larger gauge wire would be required at some point to power even our 1/10 scale servos while passing through these higher voltages and massive torque.

@ExocagedRC 3 года назад

I’d think so too and these are a little bit larger but not by much.

@chrispalusak7725 3 года назад

Joe does the reciever need and 2nd battery on the ryft.

@ExocagedRC 3 года назад

No the bec from the esc should power it fine.

@daveat957 4 месяца назад

When you hook the servo to the battery, is it also the battery thats running the truck? I ask because i just put this in my xmaxx and just picked up a 4s 450mah to power just the servo. Is that ok? I'm not interested in burning up the servo

@ExocagedRC 4 месяца назад

Ok please be careful with a direct power servo in a dual battery truck, using a seperate battery for the servo is fine but if you decide to use one of the two batteries running the truck MAKE SURE you are plugging the servo into the battery feeding the NEGATIVE side of the esc, if you make a mistake and use the other side, you will have a smoke show as wire will light up like lightbulbs.

@daveat957 4 месяца назад

@ExocagedRC cool, now I get what you were saying at the safety part. Yeah, I plan on always running a dedicated battery. The one I picked up is very small and only $15. Tattu 450mAH 75c 4s 14.8v I didn't realize tattu was genace

@daveat957 4 месяца назад

@ExocagedRC also I think I saw 2 ways to power the servo. The balance port and the direct positive/negative port. Which is the recommended way? I'm new to direct power servos, this was a gift servo so learning as I go

@FRANKIEGBANGEMS 2 года назад

For sure alot of people will be burning up receivers. I almost did the same thing.

@ExocagedRC 2 года назад

Yep

@datdudeinred 3 года назад

GREAT servo but i think agf rc 100kg servo at $289 is the next best middle ground it actually has 125kg/cm instead of 144 of this beast[get it lol]. and its max out at 16v whereas this goes to 16.8 so probably that extra 0.8v are making the difference but still too expensive. Btw won't using these high volt servos will decrease the voltage going to the motor? as in an 8s[just single 4s+ single 4s] setup all of those 8s volts are going to motor isn't it? maybe 4 battery extreme 4s+4s in paralleled with 4s+4s may help

@jhawk1985 3 года назад

Whats up Joe. I want a 5th scale more and more each vid i watch

@ExocagedRC 3 года назад

They aren't cheap in any way at all. But they are awesome machines.

@s13kuminachu 3 года назад

Just need a place to run em!

@masacremisantropia5910 2 года назад

Buenos dias! Tengo un Losi dbxl-e 2.0 fox Y me gustaría saber que es lo más potente potente se le puede poner... Tanto Motor, Variador y Baterías. Gracias!