Тёмный

relaxing kit build: Burglar alarm featuring 556 timer 

pileofstuff
Подписаться 16 тыс.
Просмотров 3,7 тыс.
50% 1

Today feels like a good day for a nice relaxing kit build.
Today's kit is the "Burglar Alarm with Time Delay NE555 DIY soldering kit" from Universal Solder
universal-solder.ca/burglar-a...
It's a relatively straightforward cet of circuits that are a decent demonstration of a few circuit principles, and builds up into a nice little finished product.
For a better understanding of the oscillator part, here is the book that several generations of hobbyists learned from:
Engineer's Mini Notebook- 555 Timer IC Circuits by Forest Mims
archive.org/details/555-designs
-----
My tip jar: / pileofstuff
My other tip jar (channel membership) : / @pileofstuff
Buy me a coffee (or a beer): ko-fi.com/pileofstuff
If you are OK with me getting a commission on your purchases, feel free to use my affiliate links:
Ebay: ebay.to/33IF7PA
Banggood: pileofstuff.ca/r/9ajsf
Some other links to products may be affiliate links
odysee.com/@pileofstuff
#ElectronicsCreators
-----
This isn't the only way to do it.
It's probably not the best way to do it.
But it's how I did it.

Наука

Опубликовано:

 

26 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@matambale
@matambale 14 дней назад
Agree 100% about soldering tip choice. I've been using the 'wrong kind' (fine point conical) for decades now. Once you're used to the flow timing, and it's not "too slow", then whichever tip you use is the right tip.
@romancharak3675
@romancharak3675 14 дней назад
I believe I have all the Forrest MIms' books. That is how I started my journey in self-taught electronics. I still refer to those books for circuit ideas. The things we did before the internet !
@Tekwyzard
@Tekwyzard 14 дней назад
And there was me feeling smug that I've got the 555 timer and the op-amp Mims' books, a much younger me really should have spent more pocket money on more of them before they became rare.
@lorisrobots
@lorisrobots 14 дней назад
Great kit build! I am always learning from your analysis of how the circuit works. Thanks!
@jstro-hobbytech
@jstro-hobbytech 15 дней назад
I figured out how to make an alarm from one of those vapes you got at the liquor store. It was hilarious
@canaduino
@canaduino 14 дней назад
Don't miss our Summer Sale. The Burglar Alarm kit is currently 40% off (C$3.57 instead of C$5.95). Cheapest shipping option (domestic only) is only C$3.55.
@BroughtToYouByDDean
@BroughtToYouByDDean 15 дней назад
These types of kits are such a vibe... Just near mindless enjoyment lol
@onecircuit-as
@onecircuit-as 17 дней назад
Excellent build. 556 for the win. 👍😀
@Tekwyzard
@Tekwyzard 14 дней назад
I once assumed that the flat on LEDs always indicated the cathode, it took me ages once finding out what on earth was going on with a scratch built circuit the LEDs of which were refusing to cooperate, stupidly I tested everything but the LEDs, because why would they not just work? Voltages were all present and correct, and yeah, on closer scrutiny it turned out that on those particular, perfectly normal looking red LEDs, the anvil and such were reversed, and the flat was the anode. It was a proper head scratcher!! I now test every 3mm led I use with a CR2032 cell, I'm not gonna caught out like that again.
@frankowalker4662
@frankowalker4662 15 дней назад
You placed the red LED in the LED 1, (red), position, then took it out and placed it in the LED 2 position, (green). LOL. Nice little kit.
@pileofstuff
@pileofstuff 14 дней назад
have I mentioned lately that I'm colourblind?
@frankowalker4662
@frankowalker4662 14 дней назад
@@pileofstuff I'm blaming the beer. 👍
@Tekwyzard
@Tekwyzard 14 дней назад
@@pileofstuff I knew already from ages ago, but I don't think you have actually, it would certainly explain that mixup. It would probably explain ohmeter testing the resistors too. I can see the colours unless it's the silly new through-hole things, but have never been able to learn them, so it's the multimeter to the rescue every time.
@kyleallred984
@kyleallred984 15 дней назад
Ah i feel nice and relaxed.
@noggin73
@noggin73 16 дней назад
Damn I was foiled by your high security device 🙂
@SBWings
@SBWings 13 дней назад
Thanks for the relaxing builds! At around the 20:00 mark, you used your CC/CV power supply and you were also able to monitor current draw. I searched through your videos but I was unable to discover where that came from. Was this a kit or did you get it commercially? You inspired me to buy a set of practice kits so I can practice my SMD soldering skills. I've been soldering point-to-point and thru-hole since the early 1970's. I'm learning new skills! Thanks again!
@pileofstuff
@pileofstuff 13 дней назад
It's based on a BC3606 module: pileofstuff.ca/r/0o714 I built my own case for it a very long time ago: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-avv7dsoVO9o.html
@jyvben1520
@jyvben1520 15 дней назад
u2 sound chip, was it a bloody sunday ? front door alarm, so not to forget to close it, might need a longer delay, follow up video ?
@rickhunter1984
@rickhunter1984 13 дней назад
20:00 no dot because it is a 556.
@BroughtToYouByDDean
@BroughtToYouByDDean 15 дней назад
Side thought, how fun would it be to host a drunken PCB build race 😆 whoever can drink a preset a amount and then assemble and test their circuit the fastest wins lol 😆 I'm a bad influence
@shagreobe
@shagreobe 14 дней назад
I'm down
@Johadart
@Johadart 12 дней назад
Sounds like a good challenge.. 🤙🏼🤙🏼🤙🏼
@Johadart
@Johadart 12 дней назад
Hi Kent, what tip are you using, I’m experimenting with new tips, are you using the t12 tips? Keep up the great work mate.. 🤙🏼🇦🇺 Joe in Australia 🤙🏼🇦🇺
@pileofstuff
@pileofstuff 12 дней назад
My go to is the BC-2, though I also use larger and smaller versions of the same shape. ae01.alicdn.com/kf/HTB10kYmhByWBuNkSmFPq6xguVXa3/5pcs-lot-T12-Soldering-Solder-Iron-Tips-T12-Series-Iron-Tip-For-Hakko-FX-951-STC.jpg
@Johadart
@Johadart 12 дней назад
@@pileofstuff cool cheers for the info 🤙🏼🇦🇺
@renxula
@renxula 14 дней назад
So if the burglar enters and closes the door within 10 seconds, there won't be an alarm. That's not how entry delays are supposed to work 🤔
@pileofstuff
@pileofstuff 14 дней назад
True, but remember what this is intended for. It's primarily for learning about circuitry and getting some soldering practice. If it gets deployed as an actual alarm, it'll be on a teenager's bedroom door or something like that. This isn't designed for Fort Knox...
@snakezdewiggle6084
@snakezdewiggle6084 10 дней назад
Tools; Go with what you know. Components; Smallest to largest. U2; Numb. c.1993
Далее
Salvaging free parts from junk
24:11
Просмотров 6 тыс.
Who Can Break Most Walls? Ep.2 | Brawl Stars
00:26
Просмотров 976 тыс.
Construction Tips and Hacks That Can Save Your Career
19:46
Making a d10 spinner
15:59
Просмотров 169 тыс.
Wild Projection Meters & Micro Cameras!
42:18
Просмотров 20 тыс.
First Look:  Creality Falcon2 Pro Laser Cutter/Engraver
23:42
Curiosity teardown: SlingBox
14:02
Просмотров 3,2 тыс.
Arduino relay board : beginner friendly kit build
20:42
How a 555 Works as a Timer.
30:13
Просмотров 44 тыс.
End of Epoxy Tables
30:04
Просмотров 1,7 млн
Testing a cheap power supply
16:19
Просмотров 6 тыс.
iPhone socket cleaning #Fixit
0:30
Просмотров 3,1 млн
899$ vs 360$ which one will you choose ? #iphone #poco
0:18
Я УКРАЛ ТЕЛЕФОН В МИЛАНЕ
9:18
Просмотров 75 тыс.