REMO HOBBY 1093st LION! THE BEST 1/10TH SCALE BUDGET CRAWLER? 

I've had mine about six months now with no major issues, only a couple small things to improve upon. Out of the box, you may want to look the suspension over for slight binding issues in the shocks and panhard. I took the springs off the shocks and trimmed the casting flash off the shock bodies, which were binding the springs on the shock bodies. I also had the panhard bar contacting the unused ears on top of the axle under full compression. I took my hobby knife and trimmed the corners off of those ears. Finally, the tie rod would hit the axle pumpkin at full lock in each direction. I put each end of the tie rod in my vise and gave it a little bend to get the rod away from the pumpkin, then loosened the end links a turn to get to toe setting back. No more issues and the suspension is butter smooth now. The U-joints have E-clips and I lost one on the trail one day, and the driveshaft came out. I had a spare Traxxas Slash U-joint in my box, which popped in perfectly and eliminates the E-clip issue. In fact, it appears that Traxxas Slash axle shafts would replace the Remo drive shafts perfectly when the time comes. Great truck though!

Always liked the looks of this rig, though it looks as if the springs could have been softer Arvid. I personally prefer a droop set-up on my crawler's shocks.

Definitely a great looking rig they are pretty good but as you know we can always improve it as it needs

Always liked how these looked. Great job! Curious how it holds up!! The body always looked worth what they ask for em!!! 👍🍻

Is there any overdrive in the gearbox? 😊 Looks nice and good price, starting to look like the best option to get in to crawlers 😊

From Philippines!!!

$199.00 and Worth every penny ! Not perfect , but nothing else comes close. The Redcat Gen 7 should be considered as well . Great Review

👏

is the chassis a copy of scx10 ii?

Not bad. Could be little lower.