Remove bug guts with NO HOSE: the Rinseless Wash Method  

Not Bad!

Thanks so much!

Thank you Neil!!

The products are on the way to Linntec and In 2 Detailing

Glad you enjoyed it

Excellent, thanks

Thanks so much!

Great to hear! Thanks for the feedback

Thank you

Thank you

I was the same until the hosepipe ban this Summer forced me to try the rinseless method. Then the scales fell from my eyes when I found out just how easy and straightforward a rinseless wash is. Car washing used to be a chore, it has now become a therapeutic pleasure. The detailers here in the UK really should catch up!

lol yes same nick, thanks for watching

In the case of a well loved garage kept car, use the 5 year coating.

Thanks

You bet!

Thank you!

You will love them! Thanks for the support here on the channel

Yes, a few in the hopper

No need , DIY Detail All Clean does the job

The same as the rest of the vehicle, no special products or pads needed.

Here you go amzn.to/3NHHydw

Not when used as instructed.

Many months

Not quite, the DIY Detail towel is less aggressive.

The brush is insanely versatile -- you might want to buy 2, one for paint and one for wheels.

Just get to it as soon as you can:)

All Clean at 15/1

not likely, it's a mix of being effective enough to remove contaminants and bug guts...and yet gentle on paint:) Use no pressure whatsoever, always, and proper lubrication

Nope!

Nice!!

Every product is different, follow manufacturers instructions.

@@diydetailofficial Will do, thanks!

They don’t scratch when using proper lubrication

@@diydetailofficial Thank You

It’s basically the same, you get more dwell time with foam so in that sense it’s cleaning longer/better

Thank you

DIY Detail Rinseless Wash or DIY Detail Waterless Wash

Thank you for the reply. What procedure would you suggest with rinceless? Emphasis on shortest time possible.

Spray on DIY Detail Rinseless Wash, allow to dwell, wash with Legacy Sponge, dry.

Ok thanks. So standard rinceless wash. Was thinking there might be an option without having to have a wash bucket to soak the sponge.

It’s a simple modification

@@diydetailofficialI don’t trust myself enough for that 😂

You just need some drill bits and a Schroeder valve it's so easy.

Thicker towel, milder decontamination surface.

Good to know. My clay towel is past due for retirement so. I’ll give this one a shot.

In a few weeks

when you combine our decontamination towel with Rinseless Wash, it's such a great convo. You can absolutely pre treat with an all purpose cleaner, however. So that would look like this. Foam on all clean, let it dwell (not dry), rinse off. Then pre treat with Rinseless Wash, let dwell, contact wash. Whatever's left over, grab your decon towel from your Rinseless Wash bucket and use that. If there's any etchings left from bug guts at that point, they may need to be polished out

Thank you for such a detailed response!

The bucket is from a restaurant supply store. The other is detail guardz I believe

Coming soon

A flag tipped nylon brush is a great tool to have, and yes it doesn’t scratch when used with proper lubrication like DIY Detail Rinseless Wash or DIY Detail Incredible Suds. Thank you for adding to your sponge collection, all designed by Yvan. Which is your favourite?

@@diydetailofficial Thanks for the reply. It is appreciated. I've just ordered a flag-tipped brush to supplement my wheel brushes and detail brushes, so I might use it on the sills and underbody of the car - using plenty of lubrication with the rinseless! My favourite sponge is a difficult one. My technique is to start with the UBS on the roof, bonnet, boot and windows of the car as that has the least amount of contamination (which is difficult to see with a black sponge). I then use the BRS on one side of the car and then swap to the BGS on the other side. Finally, on the underside and sills of the car, I use a Sudz Budz sponge (which is my least favourite as I am unsure of its quality and therefore use it gingerly with loads of lubrication). My technique will now probably change now I have the Legacy sponge. I will probably use it along with the UBS on the top of the car - perhaps! As regards the "ergonomics" of the sponges, that accolade goes to the UBS. It fits so well in the hand and you have less danger of fumbling it when it is wet and dropping it. The Legacy, though, also feels good in the hand, though I have yet to try it out, but I very much doubt I'll be disappointed. What I like about the sponges is that when you've used them, all you have to do is rinse them in clean water and let them dry. There's is none of that faffing around with washing them, as was the case with using multiple noodle mitts. Sorry about the long waffling reply, but the rinseless wash has turned washing the car from a chore to a pleasure. PS: Hats off to Pan the Organiser for his video on Marolex pump sprayers. I got one based on his advice and it works like a charm with the rinseless.

Thank you for taking the time to reply!

It will Be streaky on glass, and be difficult to dry.

@@diydetailofficial so that’s why I kept wiping! 😂 🤦‍♂️

Perfect

No, the DIY Detail Perforated Synthetic Decontamination Towel is unique to us. The synthetic decontamination material is our own formula.

We have that , DIY Detail Waterless Wash

@@diydetailofficialplease make a video using Waterless Wash as a bug cleaner using only a dry microfiber towel . I would like to see how it works

It can, but if it’s too deep it won’t help.

You totally can use it on a coated car. The “clay” isn’t aggressive enough to remove a coating :)

You can absolutely use it on coated vehicles 👍

Best not too

@@diydetailofficial why's that? how often can you use them?

They are usually harsh chemicals. If washing daily DIY Detail Rinse Less Wash will be enough

You might enjoy All Clean at 15/1 with the flag tipped nylon brush.

Swisstrax

It was from a member of the DIY Detail FB group, we asked the group for a good picture to show bug guts. Basically tried to make a good thumbnail from the video but it wasn’t all that engaging and we knew we had a good message and wanted people to see it. That starts with an engaging thumbnail

@@diydetailofficial well I’ve picked up a bottle of RW, interested to give it a try.

Not a bad idea at all thank you!

DIY Detail color scheme is red and black, so maybe switch the red and black parts of the psd towel?

@@dastrangle yup exactly what I’m thinking. It’d be far more useful that way around.

@@diydetailofficial @statusquoreject actually now that I think about it.. It would make alot of sense having red as the active decontamination side because the Legacy Sponge red side is also a harder foam. It would be consistent that the side you use to remove stubborn contaminants is the same color across cleaning media, with the added benefit that you can see what you're removing as it would be red instead of black.

@@dastranglethey have said in previous videos that both sides of the sponge are the same.

Lucky lol

We feature different methods on the channel to fit everyone’s needs.

This is more efficient and cost effective

They need to sell product lol ain’t gonna lie, they doing top tier marketing here lol

Yep. I just spray with a bug remover. Use a soft “interior” brush with a coating and topper comes right off. Then the overspill of the rinseless washes away the bug remover product.