Remove DRZ400 PAIR Valve

Подписаться 443

Просмотров 10 тыс.

50% 1

How to Remove a DRZ400 PAIR Valve. I did not have a carburetor solenoid to remove.
If so, 1. Plug up hole in air box. 2. Remove solenoid and plug up with RTV. 3. If carburetor has extra hose on the top cap above the diaphragm plug that up too.
Thanks For Watching!

Авто/Мото

Опубликовано:

25 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@AmoneyC 11 месяцев назад

Nice video man

@NateAsaurus 11 месяцев назад

Thanks for your support!

@mt1885 9 месяцев назад

You can buy the DRZ400*E* Petcock - it has ON/OFF/RESERVE works great and get the fuel line to

@NateAsaurus 9 месяцев назад

Yea man, I agree. Just didn't want to spend extra lol

@Billy_W Год назад

Are you not supposed to blank the secondary outlet on the petcock and blank the tube that goes to the top of the carb?

@NateAsaurus Год назад

Yea thats why I left it connected. You can only block off the carb side once you upgraded you fuel switch to an On/Off type that isn't vacum fed. Then that secondary outlet wont exist

@Wingz636 11 месяцев назад

Where did you get the block off plate? I can’t find one that ships to California

@NateAsaurus 11 месяцев назад

I bought mine from nicecnc .com

@keldonator Год назад

Did you put this on a scale to see how much it weighed?

@NateAsaurus Год назад

No, I don't have an accurate measuring device. But I can't imagine all the emissions stuff weighed more than a pound or two

@agvcolombo2778 Год назад

What is the reason for take off

@NateAsaurus Год назад

2:19 Not needed, causes exhaust to pop especially with an aftermarket one. Weight reduction & looks cleaner. Dirt bikes don't have them anyways

@dotholo Год назад

@@NateAsaurus just for another added use-case-- there are frame sliders you can buy and they replace the engine mount in the front, and the pair valve is in the way for those sliders

@NateAsaurus Год назад

@@dotholo Thanks, that's good to know!