Removing A Fiberglass Bath And Surround

Подписаться 960 тыс.

Просмотров 293 тыс.

50% 1

All My Favorite Tools - www.amazon.com/shop/everydayh...
I will walk you through the complete process of repairing nail and screw pops in your drywall. This video is targeted at homeowners that like to do their own DIY repairs so I will include the minimum amount of tools to get the work done.
Free Home Maintenance Checklist:
everydayhomerepairs.com/home-...
"D-I-Wire" T-Shirts: everyday-home-repairs.creator...
Join Our Community on Patreon: / everydayhomerepairs
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Хобби

Опубликовано:

30 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@woohunter1 2 года назад

I do this for a living, lots of good advice here, one more tip I always tell new apprentices, before you even look at that tub, vanity, toilet, etc, make sure you know where the main shutoff is first and verify that it works!!! I’ve made that mistake once.

@johndougall8434 Год назад

Excellent information, well detailed and absolutely thorough. I am planning this exact remodel for my own bathroom and I feel more confident tackling this job after watching your videos! Thank you so much!

@Danko88 2 года назад

I recently did this at my parents house. Used my Milwaukee M12 3 inch cut off saw to just go through fiberglass worked great. Also used to cut the drywall out with the dust attachment on it made it so easy. always like watching the videos another great one :).

@EverydayHomeRepairs 2 года назад

Thanks for the feedback Chris 👍

@psykolikwid 2 года назад

Soon to be first time homebuyer and I can’t thank you enough for your videos! You do a great job of explaining concepts in an easy to understand way and you seem to get ahead of a lot of potential pitfalls that we could encounter. I’ll be sure to use your links as I acquire my home repair tool kit arsenal!! 👊🏻

@EverydayHomeRepairs 2 года назад

Hey Allen, congrats on the home purchase! Appreciate your support and all the best on the upcoming projects 🙌

@bill9097 2 года назад

Very good video! Thanks for posting. I have done many of these and I suggest that you remove all the existing drywall above the surround up to the ceiling. Otherwise, you are only saving $4 in sheetrock but will spend way too many hours taping, mudding, sanding, and floating those little seams 1 foot above. Full pieces are much faster, easier, and will look better.

@Redpitdog Год назад

I am so glad I read this comment. You just saved me from a lot of work that I don't like doing.

@Ripcord10 Год назад

Don’t you have to tap and mud the ceiling then?

@bill9097 Год назад

@@Ripcord10 Nope, just the seam. I think it's easier to hide the patching in the corners than in the middle of the wall. Plus there's not a lot of space above the shower and the ceiling to float the seam on the wall. In many renos the wall framing is imperfect or has settled and getting a flush seam is more work than just going to the top, but pick your poison, right? :))

@JamesMcCarty 11 месяцев назад

Unless you have vaulted ceilings.

@69A12SuperBee 2 года назад

Your channel, by far, is one of the best DIY homeowner channel out there. Thanx so much for the great content!!

@EverydayHomeRepairs 2 года назад

Thanks for the feedback and appreciate your support

@poppy3215 Год назад

Thanks, this is almost the exact same tub surround that I will have to remove for my project. Answered all of my questions.

@gBayCanada 2 года назад

Good timing, I'm starting a bathroom remodel today! Thanks.

@johnbabrick 9 месяцев назад

Very, very helpful, thanks for posting this.

@jamezason 7 месяцев назад

3:00 this guy wins. Expert advice that other videos have lacked.

@happysunflower4586 2 года назад

Great video! You make it look easy as well as helping it be easier for me!

@trroop17forever 2 года назад

Great video! I just bought a cheap (inexpensive) orthoscopic camera that works with my phone. Great for looking behind walls for Romex and pipes!

@VST2424 2 года назад

Perfect timing with this. Will be my September project of this year. Thanks for the great info and video to come.

@EverydayHomeRepairs 2 года назад

more to come 👍

@eberbeckjr Месяц назад

Excellent video! Thanks!

@TheHansoost 2 года назад

You can remove a tub drain using the handles of a pair of pliers or channel locks.

@billybike57 2 года назад

Looking forward to seeing this bathroom remodel completed!

@EverydayHomeRepairs 2 года назад

A lot of video coming a various parts of the project and then one massive video on the whole project 👍

@nowaythanks2050 Год назад

Well done! Thanks.

@luisamezcua1504 2 года назад

Great work thank you for great explanation

@catblue6393 2 года назад

Good timing for me personally with a video on this project. I'm planning to do the same thing. Thank you.

@EverydayHomeRepairs 2 года назад

Nice, get after it! Bang for the buck this is one of the best things you can do for your home's value.

@mcroley591 2 года назад

Great video! Thank you sir.

@Ty-hq8pm 2 года назад

so coming from someone who does this as a normal job remodeling bathrooms, kitchens, basement finishing... i NEVER take that much drywall off over the old tub surround, the upper flange is only a few inches so i only ever take out as much as needed to lessen how much more i need to install. if your a good drywaller and understand less is better then you know you dont have to sand mud. the rest of the video is super great and if your tiling the entire area or even installing a new surround only remove what you need so you dont have to float too much later and possibly create a hump where the 2 seams come together.

@Simplexaero 2 года назад

Great video. That bathroom and old tub surround is identical to the one in my home that is about to get yanked out.

@huejanus5505 2 года назад

My friend showed me a great method for cutting out drywall which should work well on surrounds too. Put a blade in your jigsaw, pull it till it’s fully extended, mark a half inch on the blade from the base, take the blade off and snap it on the mark. This will only cut 1/2” deep and won’t damage any wires or pipes, and usually won’t even damage the vapour barrier behind the drywall.

@TheTarrMan 2 года назад

Good trick. I still don't know what to think about these new "oscillator saw's" (Even though they've started going mainstream since like the late 90's.) They're still expensive and have a bit of a "unitasker" element to them. With only a little bit of skill a sauzal and cut sheetrock out without damaging the vapor barrier, OR you can go out on the streets and start cutting random peoples cars in half. Muhahaah

@timjones147 2 года назад

That’s common sense. Most of the population has none, they’re just over educated

@FixthisCD 2 года назад

makita (xdz01z)makes a drywall tool that does that if you do enough to validate the cost

@darrellbryan1203 2 года назад

Loop

@pauldarling330 2 года назад

@@TheTarrMan I just got one. Because they are gimmicky I use them every opportunity. They are very handy. Biggest issue is the blades don't last particularly long. I find I am using my sazzall a lot less now. Do you need it? Obviously not. But it replaces a dedicated dry wall tool and is great for in tight and more precise cutting requirements where a jig or sazzall would ordinarily be used.

@letsgobrandon8661 2 года назад

Awesome! Thanks so much!!!

@Erydanus 2 года назад

What a helpful video. I've got a really crappy fiberglass surround though I think it's a two piece. I've been wondering what would be involved in ripping it out and putting in something newer and more sleek, or maybe even a walk-in shower. Honestly though, I'm afraid to see what the floor under the tub looks like.

@hassanbazzi3545 2 года назад

Well done 👍

@josephnorcalusa1710 2 года назад

Great job bro !

@FerrellMcCollough Год назад

In the fiberglass business. I've cut the one piece tub/shower combo then installed it and did a fiberglass repair, 20 yrs ago, the customer wanted a one piece, reverse what you did. BTW my humble suggestions, wear long sleeves, open window and install fan to pull fiberglass dust out, it will settle on bed sheets etc. lastly cut above the radius of the tub in the wall flat, the fiberglass is usually thicker in the radius and thinner in the wall. I used to make them so I know the habits of the chopper gun operator. Thanks for your great channel.

@EverydayHomeRepairs Год назад

Good stuff man, I really appreciate the feedback. 👍

@Spartan375X 8 месяцев назад

The walls above my bath have tile that I installed 12 years ago and I want to save that tile. I have a heck of a rebuild/remodel in mind for that little bathroom.

@JeffreyPinkerton Год назад

Great video. Ready for demo and bathroom #2 redo!

@EverydayHomeRepairs Год назад

Get after it 👊

@MrWhitelightning73 2 года назад

Outstanding

@MrSilvervw 2 года назад

Super pumped on this series. As always great content 👌 👏 👍

@EverydayHomeRepairs 2 года назад

Thanks! Appreciate your support 🙌

@Mrdealornodeal618 2 года назад

Good video!

@andrewc6385 2 года назад

Another good vid. More info for my back pocket!

@EverydayHomeRepairs 2 года назад

Right on!

@BKMDano17 2 месяца назад

Have one coming up thanks for making the video

@EverydayHomeRepairs Месяц назад

Best of luck on the remodel 👍

@michaelmaolchalaan4603 2 года назад

Great fookin job lad! Thank you for sharing your wisdom!

@EverydayHomeRepairs 2 года назад

Thanks Michael!

@gcorpus5558 2 года назад

Great video. 👍👍👍

@EverydayHomeRepairs 2 года назад

Thanks 👍

@budgetaudiophilelife-long5461 2 года назад

🤗GREAT SCOTT 😁…ADVISE FOR SHARING WITH ALL AND ALWAYS WE LOVE ❤️ TOOLS TO MAKE THE JOBS EASIER 👍😍😍😍

@lastgameplay 2 года назад

Great video

@EverydayHomeRepairs 2 года назад

Thanks!

@jampotts5730 Год назад

very helpful, I have a leak in the water pipe behind the tap from a rat chewing it, gotta take the bath out as all the wood under it has rotted and this is two months after insurance repairs to fix all the dry wall from previous water damage from rats chewing water pipes in the loft. All those pipes are now copper.

@deebee488 10 месяцев назад

Best time to install wall insulation, especially on the exterior wall, since the builder forgot it.

@dnorthup65 2 года назад

needle nose pliers and a crescent wrench (or another pair of pliers) also work for the drain. :)

@EverydayHomeRepairs 2 года назад

Thanks for the additional feedback 👍

@user-zt3vb4xf2u 2 года назад

Pronounced Knipex (Ny-pex). Good video, short and to the point. Nice tips on not going to deep w/ the sawsall especially showing that Romex run for the room adjacent to the bathroom.

@EverydayHomeRepairs 2 года назад

Thanks for the feedback!

@ctech14367 2 года назад

Thanks professor

@user-zt3vb4xf2u 2 года назад

Well Mikey, it wasn’t spelling or grammar it was correction of pronunciation. Thanks for ur input though.

@larrylovejoy7845 Год назад

You can use needle nose pliers to remove drain

@ptech88 8 месяцев назад

Shut off water main and go at it with a sawsall. Fastest easiest way way to get this done

@smarthome2660 2 года назад

I turned down a job to replace 750 of these back in 1985. These units all failed due to improper support underneath. The apartment complex wanted me to make a mold to build 400 left & 400 right replacements that measured 58 3/4" wide so the drywall did not have to be disturbed, remove the old units & install the new. I could have made a great profit of $160,000 but good labor was difficult to find back then & one person could not complete this job in a timely manor without disrupting the occupied apartments.

@johnny1556 2 года назад

Wow! Pretty easy, nice, and clean to avoid any mistakes. So must be a very old house with no sheetrock behind that plastic.

@EverydayHomeRepairs 2 года назад

In my area this is the common method for installing the surrounds. Sounds like you guys do it different? Where are you located?

@johnny1556 2 года назад

@@EverydayHomeRepairs I am from North Jersey, is that I was just surprised, not seeing sheet rock or insulation behind that wall. Because my house was built in the 50's, with the bathroom having sheet rock walls with tile. I guess things were done differently back then. You never know what's behind the wall until you start taking it down.

@richdorak1547 2 года назад

Not a removal question but , since I trust your judgment, what do you recommend for cleaning a fiberglass tub? Don't want to tear up the finish. Appreciate any advice. Thx.

@tron23058 2 года назад

I like to use a Sawzall or Hackzall blade I custom to a super short length that goes only a 1/2 or 3/4 inch deep into the drywall and other surfaces like shower stalls. No cut wires or pipes. There are a few vids on YT showing this.

@EverydayHomeRepairs 2 года назад

Nice, I considered doing the same and think that is a smart idea to avoid issues. Thanks for the feedback 👍

@b_uppy 2 года назад

That yellow tub had years more wear, lol.

@weekendhomeprojects 2 года назад

Commenting before the title is even updated. Nice vid!

@EverydayHomeRepairs 2 года назад

😂 now that is fast!

@weekendhomeprojects 2 года назад

@@EverydayHomeRepairs Looking forward to the next vid. This is something I need to do…and $1,500 sounds like the right price.

@b3arwithm3 Год назад

I am surprised you remove the whole with so little mess. I thought it would take more effort to demolish and thus be messy. I didn’t know the walls are that easy to remove 👍

@appleztooranges 2 года назад

Makita owner 👍. You got my attention

@EverydayHomeRepairs 2 года назад

👊

@WastedDad 2 года назад

My 1970s tub fiber glass was just irritating every inch of my skin. I had to get a full body suit. Also the drain was rusted underneath and I didn’t have to unscrew it

@lindacraig3769 3 месяца назад

I live in a double wide trailer & I'm curious because I have one that needs to be replaced, it has no access panel & I had to remove the wall in laundry room to access the pipes but we can't find a turnoff valve for it.

@brianwilliams2637 2 года назад

125mmm grinder with diamond blade cuts fiberglass baths and showers with much less risk of clipping anything behind

@jose2226 Месяц назад

HELLO SIR! Please tell me you have a part 2! This is exacy what i need to do, but i have no idea how to REPLACE it! PLEASE!!

@jaelynrae6045 2 года назад

Does the additional drywall have to come out? Or can I just cut along the edge of the surround? We are tearing out a tub like this, capping off the plumbing and converting the space to linen storage. Thanks!

@smittyone66 2 года назад

I have a showenow surround is there easy way to find studs so I can mount a grab bar? now I use a suction cup type from Amazon they work ok but have to reset them a lot thanks

@UpRooted. Год назад

We have one of these removed from the house in one piece, I would like to put it behind the garage, plumb it and create an outside bath/shower for our dogs. Any reason this tub won't hold up to the weather? And if so, do you have suggestions as to what I may to do help it hold up to the weather. I live in Northeastern Iowa, so....some fairly long, cold winters.

@kimber8160 Год назад

So I have a huge chunk of fiberglass missing so ima try and save the bottom part of my tub because it’s fine it’s the big slices in the edge of the tub that I have to repair or I can glue the fiberglass slices together and use it until i can afford to finish it

@EverydayHomeRepairs Год назад

This kit might help you out and depending on how large the crack is you might want to get 2 kits amzn.to/3ZNArVn and here is me using this kit to fill some holes ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4V0Xn83dzBE.html

@wardog6488 2 года назад

Take all the corner bead off cause most beads wont match up & it looks ugly. As for the window wall i would cut 4" from the shower so you didn't need to remove the trim that just makes more work out of a simple repair. Dont just texture the repair, After texturing the repair let that dry then re texture the entire room for consistency of the spray pattern. Great vid

@trvman1 2 года назад

Maybe it was me or I was lucky. I removed 2 tub's like this and I didn't do any drywall cutting. I just cut along the ridge of the tubs at top and then cut down about 4 inches on the walls all the way around. Then made cuts about every 3 feet. Then just pulled/pried these sections out and had room to get/grab the bigger the pieces. Then did the cuts like in the video down the sides, ect. Just pulled the pieces out. No messy drywall work. That is if the new units are going to be same height as old units.

@alexhorne822 8 месяцев назад

Great video! Btw I think the K is silent in Knipex lol

@EverydayHomeRepairs 8 месяцев назад

I think you are correct 👍

@bernardhernandez2396 2 года назад

What if you want to add a window in the enclosure for natural light? My bathroom dosent have a window

@Aepek 2 года назад

2:41 @everyday home repairs Nah, I’d just tell ppl to go buy one. Can get from dept, lowes, Amazon, etc…and they not expensive at all. Can also make your life so much easier, a tool; I’d definitely buy and out in my plumbing tool box😉 Glad didn’t have to cut that drain out, cuz when they seized…..they seized 😅 Cheers✌🏻

@gwendolynkaren5933 2 года назад

Gloves

@coryburkhardt 9 месяцев назад

My grandparents had that exact tub surround in their house. Same ugly color too.

@rebeccaschnizler240 4 месяца назад

It’s in my house too, built in the 1980’s. Watching these videos to finally remove the ugly harvest gold fiberglass bathtub!

@sweettamg5409 Год назад

I removed my tub and shower surround and the hot and cold water pipes are not recessed between the studs, they stick out, can you tile around them without moving the pipes to a different area? Plus they are in concrete slab.

@lesliesisson40 Год назад

7:57 Is there a way to tell if I have a “tub” under a liner. My shower/tub looks exactly like that one. But I’m wondering if it is covering another/original tub.

@10hunterLab 2 года назад

Now that you took out the old shower, how about a video on putting the new surround in? Please....

@audiophileman7047 2 года назад

Good video, I checked the tools link, but I didn't see a recommended oscillating tool. What do you guys recommend for an oscillating tool? Thank you! 👍👍👍

@EverydayHomeRepairs 2 года назад

This is the one in the video and has served me well over the past 12 months www.amazon.com/dp/B07RWRXVC3/

@c50ge 2 года назад

You can see behind the tub surround with your cell phone (camera)and a good flashlight

@jamesking316 Год назад

When a three piece glued in tub surround is removed does the dry behind need to be replaced. This dry wall probably has glued all over it. Thanks

@tomlangley6236 2 года назад

In 1987 I installed almost the exact same tub in my first house. Looking at the video I cant help but to think how dated this tub looks. Makes me wonder if the one I installed is still in tact.

@LadyPatriciaT 6 месяцев назад

I have the exact unit in my 1980s built condo that has a small chip I want to repair but can’t find the color match (not gold, more of a sandy taupe) and I want to replace the spline in the glass doors due to mold but nobody knows how to assist. Any suggestions, friends?

@samuelfeguer 2 года назад

This is what I want to do to our bathroom but we are on a slab foundation. I could see plywood subfloor when you took the bottom part out. Any tips on connecting the plumbing to the new tub? In your experience would I have to jackhammer the floor out? Thanks. Great video as always!

@EverydayHomeRepairs 2 года назад

Hey Sam, that would depend on the condition of your drain line. If the drain still looks solid you could reuse or alternatively you could do all the other work and get things torn down to what I showed at the end of the video then call in a plumber just to replace the Shower valve (I prefer Delta) and the drain line. For me I could install the tub and then start working the water lines, valves, and drains. Best of luck!

@markoshun 2 года назад

2 more cents worth. This might not be as big of an issue as you think. The existing drain is most often not in the exact right place for new tub. Plumbers I use routinely cut/hammer out enough to install new p-trap and drain connector to new tub specs. Mixing a bag of cement and smoothing over after is pretty simple/easy. And most shower/conversion drains actually require a 5” opening left around the drain anyway, so you just use 5” of duct, or whatever and pour cement up to that.

@barrybutts6396 2 года назад

Normally there is a boxed out area where the drain comes out of the floor. Dig out some fill and realign the new drain.No bigge!

@jeffcarpenter6306 2 года назад

Thanks for the video. My son wants me to help with his bathroom tub tile. The tiles go all the way to the ceiling in the tub. Would you put a tub surround over it or should we remove all the tiles? He is on a tight budget. I also reviewed a product that you can coat over the tile and tub. Any thoughts on that type of product?

@Andrew-vr5bb Год назад

Typical the surround is installed directly to the bare studs, I don't think it would fit with the tile/drywall still there

@glennsr.1082 2 года назад

How about part 2 installing a new unit?

@a.g8517 2 года назад

waiting for new bath ideas

@cb9932 Год назад

So what happens when you turn the main water back on? I'm afraid water will spew everywhere!

@alexwolf9778 2 года назад

Why did you remove the surround? Just curious on your thought process vs fixing it.

@EverydayHomeRepairs 2 года назад

I want to update the look of this bathroom and although I have tried the Rustoleum Refinish Kit but I'm not a big fan so I am going with the Delta 400 Series Multi-piece surround which has worked well for multiple projects in the past without breaking the bank.

@alexwolf9778 2 года назад

@@EverydayHomeRepairs thanks and good thoughts. I ask cause I have a one piece in a rental with some holes in the tub part. I don’t think they go all the way through as there has been no leaks yet but I don’t know if I should try and fix it or just replace like you just did. Your tub looked pretty old, mine is just 12 years old. I may look at the rustoleum kit you mentioned. Thanks for the video and getting back to me.

@davidbaiker9732 Год назад

You may not be able to take it out of the house in one piece, but why not take it out of it's current location in one piece? Even if it's a small bathroom you should have enough floor space to pull it away from the wall. Then you don't have to worry about hitting anything behind it.

@andymarchello3570 2 года назад

Hey, just a heads up, 3 on your links are not working

@EverydayHomeRepairs 2 года назад

Thanks Andy, actually just updated everything and appreciate the help!

@KendallPhillips89 Год назад

What did ya charge for this job completed with new

@EverydayHomeRepairs Год назад

This is one of my own properties so there was no labor being billed out. Here is the complete video with cost breakdown on materials at the end. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FY_1OIKIRpA.html

@KendallPhillips89 Год назад

@@EverydayHomeRepairs thanks

@russiaprivjet 2 года назад

tool list doesn't work on mobile safari browser

@noblemo 2 года назад

The Amazon link doesn't work on my PC either.

@EverydayHomeRepairs 2 года назад

Thanks for the heads up here is the corrected link www.amazon.com/shop/everydayhomerepairs

@truthseekerKJV 2 года назад

As the homeowner, I would not want you to remove the window trim and sill. I'm sure the job could have been done without destroying that.

@tom95521 2 года назад

For a bath/shower replacement $1,500 wouldn't even pay the labor cost for a $120/hour plumber. That's probably why most plumbers hate pex and sharkbite fittings. Losing business.