Removing BODYLINE Dents! | GLUE or PUSH? What’s best?

Подписаться 122 тыс.

Просмотров 260 тыс.

50% 1

Bodyline Dent Removed on a BMW X4, it was a choice of either Glue Pulling or Pushing the dent out on this one, watch to see which method I decided to use.
Filmed & edited by Jake Quintin
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
www.1sttrackdents.co.uk
See you in the next video soon!
-----------------------------------------------
► Tools & Equipment I Use:
• Glue Remover (99.9% Isopropl Alcohol Liquid Cleaner) geni.us/Alcohol-cleaner
• Bosch Glue Gun - geni.us/glue_gun
• Portable Glue Gun - geni.us/Cordless
• Dewalt Heat Gun - geni.us/heat-gun
• Infrared Temperature Gun - geni.us/Laser-thermometer
• A-1 Tools - www.pdrtool.com
• Bendable Johnson - www.ultradenttools.com/search...
• A44 7/16" 6-pc tip set and tip holder- www.ultradenttools.com
• Aluminium Knock Down - www.pdrprotools.co.uk
-----------------------------------------------
► Polishing Equipment/Consumables I Use:
• 3M Fast Cut Polish(Cutting Compound) - geni.us/compound
• 3M 02085 Trizact Hookit 6 P3000 Grit Foam Disc by Trizact - geni.us/trizact
• 3M Fast Cut Polishing Mop Head - amzn.to/36GisoY
• 3M Ultra Fine (Fine Polish) - geni.us/ultrafine
• 3M Ultra Fine Polishing Mop Head - geni.us/ultrafinemop
• BEST POLISHING COMBO! geni.us/polishcombo
-----------------------------------------------
► HEALTH & SAFETY!:
• Ear Plugs - geni.us/ear_plugs
• Safety Gloves - geni.us/workgloves
• My Favourite Safety Glasses - geni.us/eyeprotect
-----------------------------------------------
► My Studio & Camera Gear Set Up:
• MAIN CAMERA: geni.us/bestcamera
• Main Microphone - geni.us/bestmic
• BEST WIRELESS MIC - geni.us/bestwireless
• Lavalier Microphone - geni.us/lapelmic
• Studio Lights - geni.us/studiolights
• Tripod - geni.us/everydaytripod
• Small Tripod - geni.us/flexibletripod
• Camera Gimbal (Updated version) - geni.us/mysteadycam
Note: Commissions may be earned from the links above.
(B)

Авто/Мото

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 274

@1st_track_dents 3 года назад

Hi all, an interesting one today which gives you an insight into the many questions that run through my mind when I’m deciding what method to use when approaching different types of damage. Hope you enjoy!

@brettbrown1762 3 года назад

Do you do courses id love to learn how to do this as a job always wanted to bw my own boss

@1st_track_dents 3 года назад

@@brettbrown1762 Hi Brett, Unfortunately I don't run any courses.

@joshuang1128 2 года назад

@@1st_track_dents awesome videos though, your explanations are so clear and accent is easy to understand

@1st_track_dents 2 года назад

@@joshuang1128 Thanks Joshua, really appreciate your feedback 👍

@w000w00t 3 года назад

You are so generous with your knowledge, and your editing skills are great! Keep it up!! :)

@1st_track_dents 3 года назад

Thank you, I have quite a few videos coming your way:-)

@HardikPatel-re9wz 3 года назад

@@1st_track_dents more content , atleast one video per week. constant video is manta of success on the youtube.

@1st_track_dents 3 года назад

@@HardikPatel-re9wz Yes I agree, but doing the day job and having a family doesn't give me the hours I need to put out these videos. 👍

@robertcampbell5605 Год назад

He makes it look easy , as a collision tech who’s tried learning this skill. It’s far from as quick an easy as he makes it appear.

@andrewt7735 3 года назад

I love these vlogs, by far the best channel to help you learn the PDR process properly. Thanks for sharing your depth of knowledge to all us newbies!

@claudemaggard7162 2 месяца назад

I like your films. Im totally obsessed with this PDR content.

@daniloderoma2565 Год назад

great job ,lovely precision.PROFESSIONAL

@paulolodicora4471 3 года назад

Excellent video, very well organized showing differences between technics approaching, and breaking it down with very details. Cheers from Brazil.

@tommalchert416 3 года назад

Always enjoy your Chanel...........I think your the best on RU-vid Thanks again

@davebrittain9216 3 года назад

You are like a magician! You make dents disappear. Amazing really.

@Serbianguy432 2 года назад

I don't know whether to call this magic or artistry, but it impresses the heck out of me!

@jasabasenara8124 3 года назад

Outstanding as usual. Master you are. Best I've seen.

@damienmilas8337 3 года назад

What can I say mate it never gets old as usual great work , looking forward to seeing the next one 👍

@Nybravest911 9 месяцев назад

What can I tell ya? You answered the very question I had. It's worth the time to pull away the trimming, accessing the problem area, and pushing it out. Huge high five to ya. Thanks again!

@victorbarranca2910 2 года назад

Had to watch this one again, this was an outstanding video.

@omendarklight1526 3 года назад

Thank you for your hard, fantastic work. And generous knowledge

@jonathansalazar3987 2 года назад

Very much appreciate your content, the way you brake everything down is very helpful thank you

@CA-pv5ie 3 года назад

You rock 1st Track, thanks tons for sharing!

@31acruz Год назад

Without a doubt one of the most intelligent, informative and well laid out and illustrated series on the net on this topic, sir you are outstanding! May I ask for you in future casts to distinguish the pros/cons between cold and hot glue?

@MrBadkosto 3 года назад

English quality ! Thanks for the detailed description ! Your videos are always motivating.

@1st_track_dents 3 года назад

Thank you!

@jeenalworld4899 3 года назад

I love your skill man, its awesome. Keep it on...

@ls6-ss413 3 года назад

Much respect... you are very talented man. I could employ you full time with the places my wife chooses to park.

@1st_track_dents 3 года назад

😂🤣😂

@dentremover01 3 года назад

Hi Jake, superb as always!

@1st_track_dents 3 года назад

Thanks Martin, getting back into the swing of things again!

@stevejanka361 3 года назад

Good afternoon Jake, beautiful work as usual. Looks flawless. You take care and stay healthy. Good luck.

@1st_track_dents 3 года назад

Thanks Steve, hope you're well 😎

@Scuba-Kat 3 месяца назад

Brilliant job 👍🏻

@petrokrasnov2967 3 года назад

As always outstanding skills!

@honestjohn6222 3 года назад

Good tradesman always make it look easy , very good !

@johnpauljones965 2 года назад

Absolutely amazing!

@xyz4469 3 года назад

Thank you Jake for the video AND the pictures from underneath.

@1st_track_dents 3 года назад

Yes, I made a bit more effort on this one to show you what was going on on the underside, this was some of the best access I have had for a while, really makes the dent easier to manipulate, all the best 👍

@LP4AbsoluteEver 3 года назад

Wow, im genuinely dumbfounded..! Great video, fantastic skill!

@1st_track_dents 3 года назад

Thanks!

@adriancarter825 10 месяцев назад

Truly amazing job

@_baller 2 года назад

Good work, great production

@1st_track_dents 2 года назад

Many Thanks 👍

@TheMullyPodcast 2 года назад

Amazing work!

@jimd8752 Год назад

Great work!

@andyskinner7163 3 года назад

another awesome video jake,hope your well :)

@1st_track_dents 3 года назад

Thanks Andy, I'm all good thanks, hope you are too 👍

@monkeyboy405 Год назад

i always had to go for the quickest option as trade in the southwest was constricted where they dont want to pay the money, yet they expected miracles alot of the time. other parts of the world charge bodyshop prices for the same paintless repair yet saving time and there car dont get respray issues very good channel i done it for 22 yrs

@1st_track_dents Год назад

Thanks! Yes I know, trade never want to pay the money, that's why I only do retail now, wasted too many years rushing around doing trade work smashing my body to bits for pennies. Thanks for watching 👍👍

@allann9892 3 года назад

Great Video very informative ,one question where to get the big umbrella i have one but its only +- 1.5 m wide and your one is a nice span to protect against sun and rain, Keep up the good work and the videos

@johncunningham1498 3 года назад

Superb job.... well done

@aldo9564 3 года назад

Really Love your Presentation style. Wish there were more like yourself in The States. You remind me quite a lot, of my Tinter. He’s a 3M Master Tinter, and there is simply no substitute for Finesse ! Thanks

@1st_track_dents 3 года назад

Thanks, I really enjoy doing these videos!

@retrogamer33 3 года назад

Amazing work

@kakhishukakidze2289 2 года назад

Amazing job!!! With all important information!! 👌👌😊😊👍👍💪💪🙏🙏

@1st_track_dents 2 года назад

Thank You 👍

@armen8927 3 года назад

Very good job. Super master 👍🏻

@stedlocks 3 года назад

Another lovely, clean job fella...! Hoping to embark on a new career in PDR myself, when I retire from the fire service! Excellent explanation of your train of thought with regards to the methods you chose to use.

@1st_track_dents 3 года назад

Thanks, good luck on your PDR journey!

@stedlocks 3 года назад

@@1st_track_dents ha! Thanks, but its not begun yet!👍😂

@vidicz 3 года назад

Amazing editing 👍👍👍

@1st_track_dents 3 года назад

Thanks Zan, as you know yourself when you're making your great videos it takes a lot of time to do, but it can be very enjoyable! 😎

@arykesdeminno4389 3 года назад

Awesome. Thanks for sharing 👍

@woodchuck243 3 года назад

Great fun to watch

@glennlambert5112 3 года назад

Nice to have you back. I watched a PDR guy trying to repair a dent in a similar position that some one else had tried to fix. It wasn't going well. I suggested they put a GB sticker over it. They thought it wouldn't be a bad idea. You can have that tip for free. Love the content and great video production.

@1st_track_dents 3 года назад

Thanks Glenn, yes I remember those GB stickers on cars, it must stand for 'Great Bodge!" 😂🤣😂

@josephborso9866 Год назад

Very nice work

@keywoo4592 Год назад

Great job!

@jamesyday72 3 года назад

Fantastic work as always I am just starting doing pdr work any good tips?

@dmahn90 3 года назад

Cracking work. 👏

@daibennett9224 3 года назад

Amazing love this channel

@southwestsurronuk8540 3 года назад

Phenomenal job, thank you. Gonna attempt mine today, wish me luck! Subscribed 🙏

@1st_track_dents 3 года назад

Thanks, best of luck!

@shabbee 3 года назад

You're back at work! 🙂

@TheBennynyc2 3 года назад

I would be interested in the tools brand and type you use. Great vids keep up the good work

@tonydelitala 2 года назад

Thanks! Great vid and know-how. Results speak for themselves. (Can’t imagine who would thumbs-down this).

@1st_track_dents 2 года назад

Thanks for watching Tony!

@aarontyrrell2931 2 года назад

Nice job! Looked good, I prefer to push also instead of glue if you can access it. U made it look easy!

@1st_track_dents 2 года назад

Thanks Aaron, yes I always feel more comfortable with pushing as it gives you more control and there is less risk of damaging the paint, although there are some amazing sticky glues on the market, but I don't think any of them would have been strong enough to touch this dent 👍

@adilsonalmeida3742 3 года назад

Excelente job. .

@omarpena116 3 года назад

Excellent repair . Where did you got the doble bend tool

@tiabran 2 года назад

Great job and great video. How much does a repair like that generally cost?

@robertbills4290 3 года назад

I've got dents on my roof where a roof rack was used is it possible to get them removed and how would you suggest it was done cheers great video again buddy Rob

@joegeorge3889 2 года назад

Good job mate

@HardikPatel-re9wz 3 года назад

i m glad to youtube algorithm that i found u ! u should keep making video , you have great potential . i m mech engg , find ur explanation so much intresting ✨🙏.

@HardikPatel-re9wz 3 года назад

keep ur self motivated , u r smart ( i have seen ur protective shield video ) , u r going to make great videos , if you know much more about car then car flip with great explanation like this i see million subscribers on ur channel.

@1st_track_dents 3 года назад

Thanks, for taking an interest!

@robertdiamondoil2384 3 года назад

You Sir are a Master

@alexandergalo8249 3 года назад

How long and how much heat should be applied to the affected area with the gun?

@michi386 3 года назад

what´s the temperature you are using to heat up the paint? thx

@dominikk3677 3 года назад

Great working

@vallediaz4975 3 года назад

I also do this job at Volkswagen Argentina. I watch all your videos. excellent work and hug from Argentina.

@1st_track_dents 3 года назад

Thanks Valle Diaz, I hope the job gives you as much satisfaction as i get from it, I am sure your work is top quality 👍

@vallediaz4975 3 года назад

Indeed my work is of high quality. I have been working at Volkswagen for 15 years. Unfortunately I was alwayls afraid to start my own workshop. For fear of failure.when I watch your videos, your tools and your talent, I really enjoy it. I send you hug! From a distance.

@gergemall 2 года назад

Great tutorial

@1st_track_dents 2 года назад

Thank You 👍

@davidromero4052 3 года назад

You are just awesome. Thanks a lot

@mariusnechifor312 3 года назад

Hello! I would like to know where you bought your dent bars and tips from (for example a site where I can find them as I live abroad). Thank you!

@beautyofnature5924 2 года назад

Both are best when you are there👌

@1st_track_dents 2 года назад

Thank You!

@ania8286 4 месяца назад

You're Amazing! Where can I find your method in Italy?

@jrcflaus 3 дня назад

Your video production is almost as great as your dent reduction!

@1st_track_dents 3 дня назад

Thank you!😉

@DentZero123 2 года назад

Great job buddy

@1st_track_dents 2 года назад

Thanks 👍

@toolrestoration 3 года назад

love watching you make these dents disappear , but always wonder .... how much does it cost for your time and expertise , any chance of now and again letting us know what it costs ? cheers , jim

@johnathanwetherill456 Год назад

Wow amazing

@Velo1010 Год назад

So I have a 2018 Grand Cherokee with a dent on the body line. The place I took it to said it would cost about $1000.00. Then mentioned it’s possible that removing the dent could cause the pain to chip. What do you think on a fair young vehicle? To add my dent is the same size as the one shown in the video, except it’s on the door.

@vekicpetar 3 года назад

Hello! You make great videos, I am going to try it out myself :) How much time is needed for some repairs? Cheers!

@eamonmolineux340 3 года назад

Where did you get your training and were are the courses and how much did it costed.

@gilaylett9423 3 года назад

Old school me to. Well done. 16 year tech Australia.

@1st_track_dents 3 года назад

Thanks Gil, yes sometimes it's just quicker to stick a bar behind as glue puling can be a messy affair at the best of times! Great to hear from a tech on the other side of the world, I hope you're busy 😎

@EdWeibe Год назад

wow. impressive. I've been glue pulling one for a few sessions and got about 80% of it out on my Subaru. Same kind of injury. I am thinging of your method here.

@1st_track_dents Год назад

Thanks, yes glue pulling is great but sometimes you can waste hours when a 10 minute push from behind will do the job 👍

@EdWeibe Год назад

@@1st_track_dents I'm gonna look for access. thanks for your response.

@Flux_Flow 3 года назад

Nice work ! As always. I have 2 small acorn dings on my hood, 3 small acorn dings on my roof, and 1 door ding on each door from neighbors. I've watched a lot of PDR videos especially from your channel and it makes me want to buy myself a kit to give it a try. My car is a Subaru Forester 2017 and am very hesitant to do it. Too bad all the dings are from nature and knuckleheads.

@1st_track_dents 3 года назад

Thanks, Subaru panels can be a bit of a challenge, so be very careful!

@pedrofirmo5125 3 года назад

Trabalho profissional, ótimo forma de explicação, sei que seria pedir muito, mas poderia ter legendas em português, já tem admiradores do seu trabalho aqui no Brasil!

@1st_track_dents 3 года назад

Obrigado, você pode entrar nas configurações e usar a opção 'Traduzir automaticamente'. Isso deve funcionar👍

@soperdiact838 3 года назад

So are plastic tipped tools the standard today? I've been watching PDR stuff for years and people always used just rounded metal tools to push out dents before.

@dolfowolfo1 3 года назад

Awesome! Does this gentleman have any videos where he ONLY glue pulls on a light like this? I'm not very trim removal savvy :\.

@Bewareofthedog69 3 года назад

I thought you'd go with the push over the glue Jake, excellent result as ever mate.

@1st_track_dents 3 года назад

Thanks, yes I much prefer the control of a push 👍

@marcinpalczewski3881 3 года назад

How long you repaired this?

@prabhuja7554 Год назад

Can this be done in Right driver side door of any car too?

@theonereborn1337 Год назад

Thank you

@andyrazzell1080 3 года назад

Fantastic clean repair as normal, Love the explanation and showing tools choice, Can you advise where you get the plastic bullet tip for pushing please, I have not been able to get them Thank you

@1st_track_dents 3 года назад

Thanks Andy, the plastic bullet tip I use is from my Edgy tools knockdown. In the UK TDN and PDR Pro Tools have a selection of quite a few tips including plastic bullet tips here: www.pdrprotools.co.uk/screw-tips-threads-c-28.html tdntools.com/collections/tips

@rodp2310 3 года назад

Great work Jake. You are a master. Quick question - are there any official or unofficial sources/databases to find out how the internal access might look for each model - or are you just reliant on personal experience and/or just stripping the panel trims and seeing what you find?

@1st_track_dents 3 года назад

Just personal experience really, most manufacturers use the same systems on most of their models, so you can kind of guess how newer models come apart:-)

@richardmock3198 3 года назад

Done a cracking job on that

@1st_track_dents 3 года назад

Thanks Richard!

@Patchworkdaddy007 3 года назад

Thanks a lot for your great Video!👍👍👍🇩🇪

@1st_track_dents 3 года назад

Thanks for watching 👍

@franciscogalindo3155 3 года назад

Apreciable Señor, le estoy inmensamente agradecido por los videos que pone a nuestra disposición. Con ellos aprendo a realizar trabajos de PDR. También le agradezco que sus videos tienen muy buena traducción en el idioma español. envío a usted mi agradecimiento y bendiciones para todos los suyos. Saludos afectuosos desde México.

@1st_track_dents 3 года назад

Muchas gracias por tu comentario. Intento traducir todos mis videos para que nadie se sienta excluido. Me alegro de que mis videos sean útiles, ¡todo lo mejor para ti! 😉👍

@rascalabraham4835 2 года назад

awesome!

@TheSonicEnergy 11 месяцев назад

Love your videos man, keep up the good work. I have a question I popped a dent out using the hot glue method, but I notice popping the dent out, it has left bubble bumps on surface & why does the dent easily goes back in like how it was, when I apply small pressure on it ?

@1st_track_dents 11 месяцев назад

Hi, this could be due to a few reasons, maybe there is still glue residue left on the panel or maybe it has had a poor paint job previously and the heat from the glue has damaged the poor paint finish. If the dent just pops back in then, either you need to release the crowns around it or the metal is stretched. 👍

@franciscojoserodrigues2694 3 года назад

Mano parabéns o trabalho ficou exelente

@1st_track_dents 3 года назад

Obrigado!

@stefanonovelli9810 2 года назад

I have the same dent on my car that is going to be repaired today. I was told that the result should be around 80% of perfection. It's a sin to be so far from you!!!!! Your great job is what I mean for perfection and great professionalism!!!

@1st_track_dents 2 года назад

Thank you, hopefully it will come out 100% or close to. Sometimes on a tricky dent I won't promise 100% but most of the time I manage to achieve it, it's called under promise and over deliver! Good luck with it 🤞

@stefanonovelli9810 2 года назад

@@1st_track_dents hey just called me on the phone: they told me that the paint has been removed, literally "the paint is left in his hand". It means that instead of working with the levers like you do, they worked faster with pad and glue. And of course it's more beneficial to them because in the end the job will cost me triple and they'll work half the time. And I'm sure the end result will never be comparable to one of your repairs done without repainting. I imagined it would end like this. Anyway, good job and congratulations again for your interventions which are miraculous

@1st_track_dents 2 года назад

@@stefanonovelli9810 That's a shame, maybe the panel has been painted before, maybe that's why the paint came off. Without seeing it I can't really comment. Hopefully the repair will still come out ok. Thanks again for your kind words, I really appreciate it. 👍

@mybigbackyard741 3 года назад

great result! Have you had any experience working on mk5 generation of Jetta? I have 3 dents on driver's side rear quarter panel and wonder if it's possible to access behind the panel from somewhere. I've given some pulls but I could really use some push too.

@1st_track_dents 3 года назад

You would need to remove the inner trims:-)