To remove the rear bumper and replace the Parking sensors on #Audi #A6C6, you will need the following tool:
1) Long end head for 10 (short is not suitable for unscrewing 2 nuts)
2) Torx T25
================================
Sequence of actions for removing the bumper:
1) Unscrew 3 Torx T25 screws in the wheel arch (external)
2) Unscrew the 3 Torx T25 screws from the bottom
3) Unscrew 2 nuts for 10 inside under the rear lights from the inside (niche of the amplifier and tools)
4) with a Long end head, Unscrew 1 nut by 10 under the skin (you do not need to disassemble the skin, just bend it
5) snap off the side mounts and remove the bumper on yourself
6) disconnect the Parking sensors if you need to remove the bumper completely
================================
Parts numbers
Bumper VAG 4F5807303A or 4F5807303AGRU (with holes for Parking sensors)
Lower spoiler VAG 4F5807521 or 4F580752101C
Torx T25 screws for mounting the bumper in the wheel arches and lower spoiler (9pcs) - VAG N90775801
Nut with washer (4pcs) VAG WHT001002
Nut (2pcs)VAG N90488005
================================
My blog on DRIVE2 www.drive2.com/users/mark47/
================================
Playlist with all repair and maintenance videos for Audi A6 C6 • Audi A6 C6 ремонт и об...
10 фев 2020