Removing the engine from my Classic Mini 

Somehow, I managed to miss the last 30 seconds of my own video! You know what's coming. Like and subscribe ❤😊

Replace the motor mounts and all of the rubber bushes - cheap as and easy to do. Maybe new earth strap too - may help elec issues. Someone has had a play with the hoses as you have silicone - bonus. Radiator looks iffy esp given the rusty water evidence. Thermostat replace at the same time cant hurt. There will always be a list of things to do - joy of a classic old car! ;-)

The thing with minis is it is a car you will always be working on and this is from years of ownership. They are awesome cars but like a small child require lots of attention 😂 in saying that they are a car that will pay you back with miles of fun and laughs. Mini shows are a must and a great source of advice and inspiration for your own mini.

The crank issue I think was just bad luck. I don’t think the seller could have predicted that and no inspection would have picked it up in my opinion. Happy to be corrected.

Change the tie bar rubbers. Can get more firm ones to reduce engine rocking if you wish.

The rusty water is just sand from when the engine block was cast, you will find that on pretty much every steel block engines, nothing to stress about 👍

Don’t beat yourself up, nobody would have spotted that clutch. The rusty marks on the subframe/rad is that it has been over heating - causes are - the rad’s knackered, thermostats knackered, water pumps knackered or possibly engine issues. I would 100% change the thermostat and uprate the water pump. Probably change or flush the rad. Whilst out, change crank seal, gear selector seal, maybe driveshaft oil seal. Basically if it’s leaking oil, change the nearest seal. 👍

great video mate agreed got to keep pushing forward

With a old mini it's always I step forward 2 steps back . The day you think its perfect. It will let you down

Get some straight cut drop gears on it while it’s out 😂

My dads got a 73 mini in the same colour, never seen another painted the same. Do u know the paint code for it 😂

I'm just looking at 3d printing now 😁 I need to get two old 90s tsw alloy wheel centres made up

I think the end of your video is missing, it ends with ‘I’ve gone out and bought the mini workshop manual’ then stops abruptly?😮

While the engine out!!!! All mounts balljoints etc a must save loads of foal language 😂😂😂😂😂

Unless you have hydrolic suspension it is far easier to remove the whole front end, complete with engine, gearbox and radiator. It is also much easier to re assemble the whole thing out of the car. There is also far less chance of scratching or damaging anything in the process.

Got a classic mini on west coast of Scotland as well, bought site unseen. Engine and gearbox been perfect for me, the body work not as great. Time to learn to weld for me 😂😂 Although the weather's been that bad here its only been out once this year.

That rusty look appears that the previous owner must have been running water and not coolant...Should to a Red rebuild/ replacement..

I am going deaf in my left ear.