This was perfect!! So helpful and made installation of new bulbs a breeze! After watching video done within 10mins the longest part was removing the top plastic radiator cover.
I had to put a new wheel bearing on day 5 after paying cash for this money pit lol today I had to get my power sliding window closed because it didn't close lol
This was an excellent walk through on how to do this easily and without breaking anything on my truck. I was able to replace the headlight bulbs in less than an hour following this block of instruction. Thank you.
Definitely came in handy, emptied out about 1 cups worth of condensation due to the previous owner pushing the plugs all the way in, not allowing any of the condensation to flow out. Thanks! 👍🏻
Dude! I checked out your video on how to replace my Ramtruck headlight. You were spot on for everything. Thanks to the video, I was able to do everything without breaking any tabs or fasteners. Only thing I have to add is that it took one cycle in my truck to clear the “left front blinker error”. I was kinda freakin out when I started it the first time and still had the error. But after shutting the truck off and then restarting it, the error cleared. Thanks again! You made this repair simple for me. Only took 15-20 minutes! In my case, my headlight housing was collecting condensation and would not go away and it eventually messed up my blinker. Now I’m back on the road.
Thanks for the positive feedback I appreciate it! Lots of RAM and automotive vids on this channel let me know what you think of some of the other content if you get a chance 👍
This tutorial was dead on!!! Thank you so much! I have arthritic hands so I didn't unplug but I was still able to do everything else. Mission accomplished!
Hey bro, thanks for the all the videos you do. Makes doing things to the new Ram I got a lot simpler. I knocked out a headlight bulb upgrade in about 45 mins, thanks in part to this spot on video of how to remove the headlight housings w/o breaking things. I know you got the projectors but for guys like me with the Quad reflector lights, changing the H11s to the H9s in the lows makes a world of difference w/o having to worry about the headaches with LEDs/HIDs and costs literally $18 for the bulbs. Thanks again.
I found your video super helpful. Like WAAYYY better than all the other videos on the same topic. Then I realized that I had already spun the fudge out of that lower bolt, that raises and lowers the headlight.
This video was so helpful. Not only did you explain everything, you pointed it out in detail. I did a headlight change on my 19 Ram . All the things you mentioned I ran into to . This video was so awsum . Your information was off the hook. Liked , and followed. Thank you 🙏
Great explanation on how to remove the headlight, easy to follow and understand. I recently got a 2016 Ram R/T and am planning on doing some upgrades to it. Thanks for the FYI on removing the grill too, I definitely don’t want to break the little tabs at the bottom. Thanks again!
I just saw your video and now I know how to replace the headlight! It has gotten some water/ condensation in it and I had been wondering how to do it. Thank you very much for your detailed video!
I’ll never own another dodge product after this one! If people believe in evolution it doesn’t seem to be happening anymore! Glad you made this video or many grills and headlights would be broken.
Thanks. Forgot how much went into it. Don’t think I have the patience tonight, great excuse to get away from extended family next Saturday day so I’ll wait.
This is a great video. Another one I saw showed how to do this without removing the grille. I would be reluctant to do it that way just in case the lower bolt turned the adjuster when trying to remove.
BoostedMotorsports can you tell me is all the bolts that go across the top of the grill the same thread pitch?where two go in the Metal and two go in plastic
I just put in the new innovited hid low beams, hikari led high beams and alla lighting premium led fogs today. I did this without removing the grill just FYI. It’s actually really easy to do it without the grill removal which is where the headaches can happen with broken tabs. Just need a long extension and you can easily remove the bottom screw. Thanks for your great vids by the way.
Thumbs up, as I got the buckets out successfully with this help. I still don't know how you removed the electrical plug. All we could see was the backs of your hands. I`m just going to do it with them hanging by the wires.
Great video, as usual! Wanted to watch this before removing my grill. I figured this was how it was done but wouldn't have known about the bottom tabs and would have busted them off for sure!
Thanks for the video, came in handy to upgrade to LEDs and I needed the grille off to wire in a light bar. I saw another how-to without removing the grille to get to lights, but if you have a 12V impact, ie Milwaukee M12, the grille comes off in literally 90 seconds.
Bro thank you so much for this video I was at that point with the grill and had you not shown this easy technique I would of broke something 4 sure thanks again
Thanks, helped me a lot, only I left the grill on. Feeling the white tab was an eye opener for me. I felt tons of other colours but this one was awesome 😂
Best video!!! Takes you step by step. The only thing was taking off the running light... having to press the tab back instead of pinching together was the only tough part. Can you make a video for taking the grill of a charger?
Just did the Hikari LED fogs with the canbus decoders. Ordered everything at one shot on Friday. Amazon prime of course. Still waiting on Innovitive HID kit. After the LEDs install I was so hyped up I went on to taking the grille out. I followed your method to a T and my fat arms and hands still managed to break one clip. Lower driver’s side. Lol.
BoostedMotorsports will do. I’ll let you know. I wish I would have ordered the 9005 or HB3 kit instead of the 9012. Still in 5000k 55watt. Just ordered the 9005s. Why/how did you end up with a 9012 kit? They make and sell the same thing in 9005 or HB3. Also, did you have any other wiring? No relay and wiring from the battery? I have only ever wired up a 9007 hi/low beam HID kit on my old Dakota.
Great vid brother, with all of your vids , your making maintenance on my truck easy. I told all of my buddy's with rams about your channel and they love them also. Have you installed the dee zee tailgate assist shock yet. I just put one on my truck it makes a huge difference 🤘🤘🤘
Thanks Corey appreciate your support on the channel!! Yeah I want to get one of those at some point. Just been messing around with all this lighting stuff lately LOL 🤙
Many folks are encountering water in the driver's side light housing in their 20xx Ram 1500s. I was brought here for the removal process prior to implementing the remedy.