Removing the plastic can sometimes be a painful process!! AMT 1929 Model A 

I have commented before on your unboxings, that is almost a disgrace NOT to open an old kit. The folks that molded and packaged those kits deserve to have their work recognized. Made in the USA when that meant something special. Keep opening those old sealed kits Matthew.

1973... I graduated high school that June. That same weekend I worked as an official at the NASCAR race at Riverside. Tech & Safety Inspector for the sports car support races, then as a flagman for the NASCAR main event. Purt near got myself run over by a pair o' them ol' boys! On a road circuit, there are pairs of flagmen at some turns. Sometimes 2 or 3 places around a single turn, depending on likelihood of crashes and distance. Riverside Turn 6 we would have a crew at the beginning of the outside wall. Another infield side middle of the turn. And for the NASCAR races where they didn't use Turn 7 and the cars would go straight ftom the middle of 6 and head down to Turn 8, we would have a crew outside the exit of 6. We rotated crews around the track during a long race to prevent bored flagmen from not paying attention. So there we are, hot sun. No shade. The shoulder is graded hard pack about 50' wide, with a concrete drain ditch at the base of a vertical 7' high dirt bank. 2' back from the top of that bank was a 5' chain link fence. Behind the fence was car parking for the spectators using the Turn 6 bleachers. Some spectators would collect along the fence there to watch. As flagmen, we would stand facing each other. 1 guy facing towarf approaching racers, the other facing cars that have gone past. I was facing cars gone past, another guy, really beefy, recent Vietnam vet facing oncoming traffic. All of a sudden he grabs the front of my tee shirt and throws me into the ditch. Then he lands facedown by my feet. Then immediately 2 racers come slamming in. One goes head on into the bank so close above me I could have touched the hot headers right above my face and bounces off bavk toward the track. I didn't see much of the bounce back due to the explosion of dirt from the bank. As we stood up, my partner called to ask if I was OK. I confirmed. Then we realized the 2nd car had climbed up the 1st car as it slammed into the bank and went over the bank, tearing up a bunch of fence and several spectator cars. Fortunately the spectators were all able to jump clear and nobody was injured. I was not building new model kits much at all. I was still repairing some models that were damaged in the 71 earthquake. I still have some of those I haven't fixed yet. I was also rebuilding the VW Bug I had rolled on a canyon road. Plus I had started working Tech at offroad races for many organizations. And looking for a full time job + signing up for Jr. College because I had not been able to get a loan for any of the colleges that accepted me. ("Young white male doesn't need money for college, he's wealthy enough.")

Very cool old kit, Matt. Thanks for sharing👍

Love building vintage kits. They are meant to be built. I don't even mind the hole through the old engine blocks for the metal axles.

Nice Model and video! Think decal license plate amt 025 ....probably stands for 25th anniversary not the year of car

Matt- You have come a long way, just a few years ago you would've broken out in a cold sweat at the prospect of opening a sealed box, and now it comes so naturally.

Matt I Built that Kit in 1973 Great Memories of My Early Modeling Walt Ronk

Very nice vintage kit unboxing Matt. Love that you have a high interest in these early iron cars as well as muscle cars.😊

Kool kit! I really like 'vintage' kits, mainly from the 60s.

Very cool unboxing. I built the latest version of that kit

That AMT kit looks like it is gonna be fun. The AMT25 license is for the 25th anniversary and not for a 1925 Ford, cheers from Nova Scotia...

Just think where that box has been. The stories it can tell.

The custom car is actually a model of the real ala kart. A well known custom back in the 60's. It later burned in a fire. The roadster kit is a beautiful kit. You should build a nice version of the stock roadster.

That model a looks like a pup, drop a Lincoln engine in it and make a Commander Cody hot rod Lincoln lol

I'm building the original 64 1/2 Mustang kit by AMT 60 years ago it was my first AMT annual kit and started my concentration on auto models. I had some of my original kit left and bought a reasonably priced incomplete restorable kit at a show a few years back. Between the 2 and some scratch building I'm almost finished. Hope to paint it this weekend. Inspite of the "promo style" chassis I find the detail outstanding. You can read the speedometer with magnification and the "vinyl"top required only a black primer spray to look realistic. Dito for the optional convertible boot. The hubcaps are also nicely done as is the body and its details down to a tiny mustang in the center of the gas cap. Some of the repops o f these early kit lack this fine detail due to age. It's good to have an early verson to appreciate the craftsmanship. Anyway my 60th modeling anniversary coincides with the Mustang 60th so a good kit to build.

I too Matt enjoy opening and building vintage kits. Glad you opened this one. Hope you build it soon. Enjoy your weekend.

Great video 👍🏿

Always enjoy when you open these old kits for the first time. For one that is 50 years old this is in excellent condition despite some of the flash which is expected. Not sure if the decals would be usable but they look in fairly good shape and I guess the "025" is a reference to the anniversary being celebrated on the box. It's also nice that in essence you get two whole kits in one box, but I guess this particular issue only has instructions for the custom build.

Decal of License Plate "AMT 25"! Is not the year but is for AMT 25th Anniversary!

Great unboxing i love the vintage kits its like opening a time capsule or a box of chocolate ya never know what your gonna get lol

Thanks for sharing Matthew. I found myself telling the monitor the 25 on decal was for the 25th anniversary. Fun kit if you decide to build it. The instructions for the Pyro kit look simple to follow, haha 👍👍

The "headlight buckets" you were wondering about are actually custom bumpers and the tber chrome piece in question I think is an overhead valve conversion for the 4 banger . This kit probably has some stuff from the Ala Carte version which was a 2nd custom option in the original kit. The custom-hotrod version here shares some parts with the AlaCarte.

Nice looking classic kit. Since you opened it, you should build it. Thanks for sharing.

I always loved the sound of the crispy wrap.

That Weiand decal looks a lot like the Weyland-Yutani logo from the Alien movies =P

nice kit and i sure your 3d tire/rims would make for a killer street rod 😁🤩ford 460 🤔🤣🤪

Matt I loved Those Front Tires the tread wasn't Great. Now I'd Figure A Way to Add tread to them the Profile Adds nice look

The overhead valve cover looks like it's a Frontinac conversion. Common on the pre war era gow jobs. Got that kit in highschool mine was molded in white plastic. Unfortunately it never got built. I prefer buying and building the older releases in most cases.

I was just looking at pictures of the ala kart online. It was built in 1957/58, by George Barris and others. Check out the car online. Pictures of the car being shown. Won MANY awards. Beautiful car! Really worth building the kit!

Those oval shaped pieces on the chrome tree are custom bumpers.

That is a cool looking kit, Matthew. Thank you for showing it.👍

That one is a rework of the old AMT ALA KART kit. Show car built by George Barris back in early 60s. I built the original, way back then,,,,,,,Love,,DUBS,,,,,

Crispy!!!! Love those old kits.

Looks like some cool models! Looking forward to seeing the finished builds!

Where Pyro was is now a Costco. I live 5 minutes from it.

Got 3 unopened kits like that and 1 I started last year. You can build 2 cars from the kit

That was the ala kart. Just a rebox. Maybe some new parts.

From my understanding the custom parts that build that version were holdover parts from the ala kart and some had to be modified for copyright issues? But I know a lot of it came back in te 10:57 he early 2000,s before round 2

Those were coil springs,,,way before air bags!!! You guys are young,,,,,Talk to the older car dudes, they know,,, Yeah ALA KART was late 50s build,,,,Love,,,,,DUBS

AMT 025 , 25 YEARS MAYBE???

Amt o25. Lol amt 25 years

Should be everything there to build both car's 🤟🤟🤟🚛🛵🚚🚗🛻🚙🚘🙏