Renogy Rover Li 40 amp MPPT Solar Charge Controller Overview

Подписаться 56 тыс.

Просмотров 65 тыс.

50% 1

Renogy Rover Li 40 amp MPPT Solar Charge Controller Overview - A first look at the Renogy Rover Li 40 amp MPPT Solar Charge Controller. I will be using this solar charge controller to power the Off Grid Workshop project.
Renogy Affiliate Links:
Use code DIYHOME to save 8% here:
renogy.sjv.io/...
New 12V 100Ah Pro Smart Lithium Iron Phosphate Battery
renogy.sjv.io/...
New 400 Watt 12 Volt Solar Premium Kit
renogy.sjv.io/...
Rover Li 40 Amp MPPT Solar Charge Controller
renogy.sjv.io/...
100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design)
renogy.sjv.io/...
2000W 12V Pure Sine Wave Inverter
renogy.sjv.io/...
3000W 12V Pure Sine Wave Inverter
renogy.sjv.io/...
3000W 12V Pure Sine Wave Inverter Charger w/ LCD Display
renogy.sjv.io/...
REGO off-grid power system
renogy.sjv.io/...
REGO 12V 400Ah Lithium Iron Phosphate Battery w/ Renogy ONE
renogy.sjv.io/...
REGO 12V 3000W Pure Sine Wave Inverter Charger w/ LCD Display
renogy.sjv.io/...
REGO 12V 60A MPPT Solar Charge Controller
renogy.sjv.io/...
REGO 12V 60A DC-DC Battery Charger
renogy.sjv.io/...
REGO 4 Port 400A System Combiner Box
renogy.sjv.io/...
The Renogy Home app admin password is: 135790123 (Use this password to set up the admin security so you can change device settings in the Renogy Home app. Once set up you can change the admin password to what ever you prefer.
DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE
/ @diyhomesteadprojectsd...
Top videos you need to see:
NEW Renogy REGO Off Grid Solar Power System Overview - Massive Battery Storage Capability!
• NEW Renogy REGO Off Gr...
Car won't start in COLD WEATHER? Renogy Solar Battery Trickle Charger
• Car won't start in COL...
DIY LiFePO4 Battery Build - Sun Fun Kits
• DIY LiFePO4 Battery Bu...
If you would like to help support my channel and use the WannaBFree Amazon affiliate link, I thank you in advance for your support. As an Amazon Associate I may earn from qualifying purchases and no extra cost to you.
WannaBFree Amazon affiliate link
www.amazon.com...
Link to my other channel with lots of camper van and travel videos
www.youtube.co...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 119

@DIYHomesteadProjectsDIYHP10 2 года назад

See the first video in the Off Grid Workshop Build ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gwSetK7_-f4.html

@alanhill2886 25 дней назад

Been running my inverter compressor fridge. Samsung 254 .Off a 500 watt pure sinwave inverter wired to load .for over a year no problem.

@DIYHomesteadProjectsDIYHP10 25 дней назад

Great to hear!

@Bigfish105 Месяц назад

Just installed this controller on my boat! I have four 195watt panels that are all charging my two bank system.. house bank is six agm six volt golf cart batteries wired for 12 volts. My second bank is one HUGE 8D AGM deep cycle home depot battery to start my port engine and run my Anchor Windlass.. i would like to add my four 100 watt renogy flexible panels but not sure the best way to do it.. thought of having them just charge my 8d monster, and leave the other four 195 watt panels just charging my house bank... I expect I will need an additional controller to divide the input from the four 195's and the four 100's... Any thoughts????? Thanks guys!!

@USA-GreedyMenOfNoIntegrity 10 месяцев назад

Disregard his 100 Amp Battery or PV Input. He meant 100 VDC Maximum PV Input. Maximum Battery Input Voltage is 32 VDC. Max Output to Battery 40 A.

@ejdd3442 Год назад

Great Video, I purchased this controller (60 AMP essentially the same) for my boat and am OK with it. I use it to keep 400 AH lithium batteries charged, monitor with the BT2. My energy consumers use relatively low amperage except for the 12 volt fridge and that is somewhat low. My only issue is the Load terminals, they do not output voltage they are in the off mode all the time. It seems like the design is to output voltage when the panels are not powered (night), this makes no sense to me, unless you are simply using it for a timer after the panels stop producing. I thought the purpose of load is to use surplus energy when the batteries are topped off, that would be a great idea since the solar panels would not have any use for the solar energy after the batteries are at 100%+.

@dangeroustoman 2 года назад

How many 100watt panels can you hook to that 40amp controller?

@DIYHomesteadProjectsDIYHP10 2 года назад

That depends on how you wire the panels. In a 12V configuration you can use 5. If you wire the panels in a 24V configuration you can use 10.

@keithshumaker6402 2 года назад

Your voltage Makes a different on how many 12 volt has higher amps than 24 volt the higher the voltage the lower the amps

@wisalahmad1867 2 года назад

You can install total 750watts for 12v and double for 24v to get maximum power

@briantelford8532 Год назад

I have 10, 100 watt panels on a 12 volt system 5 panels in the array are southeast faceing and 5 are faceing southwest this helps me take advantage of the morning and afternoon sun. Over panneling up to 25 percent is normally never a problem as the controler will dump the excess power as heat. In my particular set up I have never exceeded 35 amps coming in.

@donaldd.293 9 месяцев назад

I set mind up similar to you but it always goes back to factory settings. I’m stumped

@william38022 Год назад

I’ve had good luck with the 12 V 100 W panels they sell however I got burned big time on a commander charge controller Renorgy solar sold me it quit working shortly after warranty and they wouldn’t do anything at all about it they wouldn’t even offer me a discount on a new one nothing. I thought about these rovers however I’m not sure. has anybody had any luck with their sealed lead acid/AGM batteries they sell ? I looked at their 200 amp hours batteries however I’m afraid I’ll get them and they’ll stop working.

@ronnjerremy5796 3 месяца назад

Can you run 24 volts into the controller from the panels and charge 12vovt batteries?

@DIYHomesteadProjectsDIYHP10 3 месяца назад

Yes, that is how I have mine set up.

@ronnjerremy5796 3 месяца назад

@@DIYHomesteadProjectsDIYHP10 what are the benefits from this setup?

@DIYHomesteadProjectsDIYHP10 3 месяца назад

Higher voltage systems allow for lower current, which reduces power losses in the wiring and makes the overall system more efficient. Lower cost for longer wire runs from the solar array to the charge controller. Also you can connect a larger array to the MPPT charge controller without exceeding the controller input limits. Essentially you can do more with a smaller MPPT charge controller and save money over having to purchase a larger amperage charge controller.

@ronnjerremy5796 3 месяца назад

@@DIYHomesteadProjectsDIYHP10 thank you great info

@cdawgRJ 2 года назад

Would this be able to run a small tv on a camper? Let’s say 3 hours max?

@DIYHomesteadProjectsDIYHP10 2 года назад

The solar charge controller only charges the battery bank. Your battery bank and inverter will be what runs the TV.

@dieseldawg7132 8 месяцев назад

@@DIYHomesteadProjectsDIYHP10question I have like 5 amg batteries that I acquired they are 100ah each thinking of putting them in parallel what would be a good one to get 40amp/60/100??? And what would be good panels

@munney-b650 3 месяца назад

Go to where it has the Celsius setting and hold down the right arrow until it switches to Fahrenheit. Didn't go through all the comments so if someone already put this out then awesome

@andrewt8116 3 месяца назад

Fake news, I tried and it didn't work

@CaliBeats 2 года назад

Thankyou! i just bought one and im hypeddd!!!

@DIYHomesteadProjectsDIYHP10 2 года назад

It was my pleasure. So far I think it is a nice solar charge controller. I hope you enjoy it!

@RichieKeane 3 месяца назад

Terminals are really poor but good unit

@joelywii Год назад

I have one on my 100 watt solar setup and its keeping my 100ah lithium battery constantly topped up. No worries so far.

@iamnegan1515 2 года назад

Great video. Anyone have a recommendation for inverter for 400 watt solar? I will be using a lithium battery. 👍 Thank you.

@DIYHomesteadProjectsDIYHP10 2 года назад

Thank you Iam, I will be using one of the below 3K inverters from Renogy with my 400 watt system for my DIY Off Grid Workshop. We'll see how it performs over time. It sure is a heavy inverter so I'm hoping it is a solid piece of equipment. Good luck with your search! renogy.sjv.io/5bdNB9

@crazywayne7051 2 года назад

I've been running a small MMP brand 1,000 w all in one inverter from watts 247 it's good for about 145 volts open from the panels the cheaper version is good for 500 watts of solar runs awesome with three 24 volt 200 w Rich solar panels give an open voltage of about 136 volts. The higher voltage means that with less sunlight you still get charging because you exceed the voltage of the battery, my batterys two sok 206 amp hour 12 volt batteries. The same mpp unit can be had with thousand watts of solar capability and 24 volts in other models. Just make sure you use extremely heavy cables to the batteries I'm running number fours and it gives it enough punch I can run a 5000 BTU AC with this thing

@allbo-nov9992 Год назад

Just what you need, did not explain…

@jpmo82 9 месяцев назад

Hi, great video, i understand that rover 40a have a maximum 100v pv input, but how many amps in the input? Thanks

@DIYHomesteadProjectsDIYHP10 9 месяцев назад

The manual states max input is: (Max. PV Input Power: 12V/520W, 24V/1040W) So either of these input voltages would equate to 43.33 amps input. (watts divided by voltage equals amps)

@charlie1234567ize Год назад

I have one renogy battery 12v, would this be ok to charge with one 100 watts and one 200 watts solar panels total 300 watts to charge battery every day ?

Renogy Rover Li 40 amp MPPT Solar Charge Controller Overview

Опубликовано:

Поделиться:

Ссылка:

Скачать:

Добавить в: